Develop Bugs

[Q] No 3G connection with Cyanogen CM7 Gingerbread

This question should probably be in the thread for the rom.
The 3G connection is not working with Cyanogen CM7 build 32.
It was working with leedroid 2,3d.
Anybody got a clue?

Too bad that i need 10 posts before i can ask that question in the developer thread and report bugs.

I just flashed the latest radio without any better results.

This thread is correct to stay HERE..NOT in dev section, thats why the 10 posts rule
U should open a thread in dev section only if You developed something..
About the 3g connection, it works fine on my phone on latest cm7...maybe poor connection in ur location, i dont know
Sent from my HTC Desire

andQlimax said:
maybe poor connection in ur location, i dont know
Click to expand...
Click to collapse
That was not an alternative. But i received a bootloop on the phone after installing a theme. Full wipe and clean cache + dalvik.
Then it works!

It´s working now after a clean of dalvik cache and manually set APN under network settings.

lindahl85 said:
Too bad that i need 10 posts before i can ask that question in the developer thread and report bugs.
Click to expand...
Click to collapse
Doesn't Cyanogen have it's own forums? Surely you'd be better off there?

Aitese said:
Doesn't Cyanogen have it's own forums? Surely you'd be better off there?
Click to expand...
Click to collapse
This was why i wrote it in this thread...
Kali- said:
This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Click to expand...
Click to collapse
I was not able to make posts in that thread before 10 posts on the forum.

Same issue.
I am having the same issue. What do you mean by "manually set APN under network settings."?
Thank you.

Some APN settings from CM7 are not correct. You might need to manually enter these settings. You can usually find your carrier's APN settings either on their website or by calling them.
In CM7 go to settings, wireless & networks, mobile networks, then Access Point Names. You must delete anything listed by clicking on each one individually then clicking menu and choosing delete. Then you can add your settings by clicking menu then add on the main access point names screen.
Hope that helps!
Sent from my HTC Desire using XDA App

APN
I added the apn manually and it fixed the issue for me. I had the same problem on leedroid btw.
Thanks.

I'm having the same issue, I was going to try and clear the settings but in my ver. of GB I have nothing to clear, it list, "Data enabled" "International data Roaming" National data roaming" and "System select, Home, Affiliated, auto"
The first three are check boxes only, nothing else, is there another way to reset?
Thx

I also had 3g problem with defy and cm7, Fixed
I found an app in the app drawer called baseband switcher. I simply had to open the app, set it to US Tmobile and reboot. I set the default apn to tmobile and now I have 3g/hspa.
Of course I didn't notice this baseband switcher app until after I wiped the phone twice trying to fix this issue
I hope I can save someone else the time and hassle of reloads and reboots and apn renames.

AOKP JB (And Possibly CM10) LTE Canada - Issue + Workaround

Update: Saw some reports about Cyanogen fixing Canadian LTE issue in his latest CM10 build! Now to wait for AOKP JB to follow suit.
Hey Guys,
So I've been hearing a lot of Canadian LTE Issues on JB Roms such as CM10 and AOKP JB. Although I did have 4G (LTE) on CM10 when I first flashed it, straight from AOKP ICS no data wipe just Cache & Dalvik, my 4G icon disappeared after a couple hours so I thought I was subject to the same issue as all the other Canadians. Not a big deal, JB outweighed having LTE at least for now.
Since AOKP JB was just released last night (Can't thank you guys enough Task + Ktoonsez), I immediately jumped back on AOKP (JB) and happy to report that I do have LTE working on a Canadian carrier (Rogers).
I didn't do anything special, although slightly risky, I'm sure if it works for me it will work for you. Just to be clear, I'll run you guys through my exact steps:
1) I started on CM10.
2) CWM recovered back to AOKP ICS (I did this just to see if my LTE was still working on AOKP, it was.)
3) Did all my pre-Flash setup (Titanium Backup, SMS/Whatsapp backup).
4) Nandroid of course.
5) Clear Cache/Dalvik (I know Task said to do a full Wipe, but I ran into no issues from AOKP ICS -> CM10 without Data wipe, so I took the risk for AOKP ICS -> AOKP JB too, so far no issues.)
6) Flashed AOKP JB (I assume this would work the same for CM10 too.)
7) Flashed JB GAPPS (and then JB Inverted GAPPS )
8) Reboot.
That's it really. Im still running amazing on AOKP JB, no issues so thank you Task and Ktoon, you guys do amazing work.
As a final note: I am extremely sorry if you run into any bugs with the JB Roms, a Full Wipe is ALWAYS recommended if you run into unexpected bugs. Also, if you experience boot loops, then that's what the Nandroid is for. Of course most people are running these JB Roms as a Daily Driver, they really are that good. But, keep in mind they are also still considered "Previews" so don't expect 100% functionality.
Plus most importantly, this is just a procedure to get LTE working on JB Roms for Canadian phones, if you run into any other errors then you probably should start clean, you have been warned.. I've only been running AOKP JB for a couple hours now, but I can say I haven't noticed any issues at all yet + LTE with a Rogers phone.
TLDR - How to get LTE working on Jellybean Roms, on Canadian S3 (I747M)
Warning: This Method utilizes a No Data-Wipe Flash, use this at your own risk. But, ATM, this is probably the only way to get LTE on JB for Canadian Carriers/S3s until the Network Preference Setting is implemented.
1) Start from an AOSP ICS ROM where you had LTE working. Recover back or flash an AOSP ICS Rom. (This is important as I don't recommended a Non-Wipe flash from a Non-AOSP Rom to an AOSP Rom, especially ICS -> JB)
2) Make sure you have your LTE APN set for your Canadian carrier.
3) Make sure you set Network Mode: LTE Preferred
4) Nandroid!
5) Wipe Cache
6) Wipe Dalvik Cache
7) Flash AOKP JB or CM10
8) Flash GAPPS
9) Reboot
There you have it, it worked for me and I sincerely hope it works for all of my fellow Canadians as well!
Good luck everyone!

all of this...
5) Wipe Cache (x3)
6) Wipe Dalvik Cache (x3)
is useless and unnecessary just so you know. it does absolutely nothing. just saying.

task650 said:
all of this...
5) Wipe Cache (x3)
6) Wipe Dalvik Cache (x3)
is useless and unnecessary just so you know. it does absolutely nothing. just saying.
Click to expand...
Click to collapse
Haha np, I figured as much! But, it's what I did, just for good measure. Thank for the clarification, good to get one from a Pro Dev. I'll edit the OP. :highfive:

Your TLDR is almost as long as your original post... but thanks! :good:

GalaxysHeart said:
Your TLDR is almost as long as your original post... but thanks! :good:
Click to expand...
Click to collapse
Haha true that, I wrote the TLDR and rambled on again.
Let me fix it again... :fingers-crossed:

It works.
Cheers.
Now, the only problem would be if I wanted to switch between 3G, H+, and LTE, would I lose LTE until I flash to ICS and back?
This needs some further testing.
Sent from my SAMSUNG-SGH-I747 using xda premium

Oddly enough, LTE was working the first time I flashed 7/25 CM10, but when I wiped and flashed again, the network types menu disappeared. I can still manage to change the network mode to lte temporarily I'm the *#*#4636#*#* menu, but the setting doesn't stick and it goes back to WCDMA preferred on a reboot.
Any other Canadians still experiencing problems with LTE and the latest CM10?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Finally convinced myself to install JB, and I've got LTE working on a clean install.
As usual, just add the Rogers LTE APN.
After a reboot, my 4G symbol was back, and I've confirmed LTE speeds of 24/22 (not bad).
Here's the info:
APN - ltemobile.apn
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
APN type - *
All other values are left as default.

GalaxysHeart said:
Finally convinced myself to install JB, and I've got LTE working on a clean install.
As usual, just add the Rogers LTE APN.
After a reboot, my 4G symbol was back, and I've confirmed LTE speeds of 24/22 (not bad).
Here's the info:
APN - ltemobile.apn
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
APN type - *
All other values are left as default.
Click to expand...
Click to collapse
I tried your method, i was able to get lte speeds on AOKP ICS but when I went over to AOKP JB without a wipe I lost my LTE speeds, it just stayed on 3G. What could I have missed?

Not sure if this will help, but when I upgraded from a previous cm10 build to the current without wiping, my existing lte APN (that I added before) would not pick up; I'd select it and it would automatically switch back to the default rogers APN.
I fixed the problem by adding another lte APN (different name than the existing one, named "lte") and it worked. I used the same settings above, with the exception of "apn type", which I did not set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I just tried creating a duplicate lte apn on AOKP after doing a full wife from stock. no luck. still no lte after reboot.
There must be a cause for this problem. Without figuring that out, it will be harder to find a solution.
I wish I could use CM10 or AOKP. I find that my connection has trouble staying even on H and usually reverts to 3g.
Oh well.

@OP
Curious to ask which AOKP build did you use when you dirty flashed and have you experimented with some of the later builds

bakasam said:
@OP
Curious to ask which AOKP build did you use when you dirty flashed and have you experimented with some of the later builds
Click to expand...
Click to collapse
Hey Bakasam, sorry for the late reply. I've successfully "dirty flashed" every AOKP JB build one after the other since the beginning keeping LTE along the way. I have noticed that it is still possible to lose LTE while on AOKP from the following:
1) Flashing Ktoon's kernel caused me to lose LTE.
2) Turning on Navigational Softkeys from Rom Control + Reboot caused me to lose LTE.
Still, as long as you have a working version of a JB AOSP rom (CM10 or AOKP) with LTE on, so far it has seemed safe to dirty flash over without problems. Keep note I have not tweaked my phone's system settings much so maybe that's why it has been so safe.
realist123 said:
I just tried creating a duplicate lte apn on AOKP after doing a full wife from stock. no luck. still no lte after reboot.
There must be a cause for this problem. Without figuring that out, it will be harder to find a solution.
I wish I could use CM10 or AOKP. I find that my connection has trouble staying even on H and usually reverts to 3g.
Oh well.
Click to expand...
Click to collapse
If you want LTE on AOKP JB, you're gonna have to follow my instructions in the OP and not do a "full wipe". I haven't flashed CM10 since the first build, so I can't confirm if it has the Network Preferences setting to set LTE. Most likely, the problem isn't APN for Canadian phones, it's the fact that we are missing the Network Preferences option (at least in AOKP we still are, not sure about CM10.)
sm00nie said:
Not sure if this will help, but when I upgraded from a previous cm10 build to the current without wiping, my existing lte APN (that I added before) would not pick up; I'd select it and it would automatically switch back to the default rogers APN.
I fixed the problem by adding another lte APN (different name than the existing one, named "lte") and it worked. I used the same settings above, with the exception of "apn type", which I did not set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If you followed the OP steps, by not full wiping (dirty flash), I'm not sure why you would have to touch APN settings at all? For me I haven't even touched the Networks setting section ever, but I'll still have LTE (because my LTE APN was selected before the dirty flash in the previous build).
Latty said:
Oddly enough, LTE was working the first time I flashed 7/25 CM10, but when I wiped and flashed again, the network types menu disappeared. I can still manage to change the network mode to lte temporarily I'm the *#*#4636#*#* menu, but the setting doesn't stick and it goes back to WCDMA preferred on a reboot.
Any other Canadians still experiencing problems with LTE and the latest CM10?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I'm planning to flash back to CM10 to check it out either this build or the next, I'll let you know how it goes. EDIT: Flashed 8/10 CM10 and indeed there is the "Network Preferences" option and choosing LTE gave me LTE fine. Looks to be good on CM10, now hopefully AOKP follows eventually..

just an update.
I've managed to get LTE working on the latest CM10 build (8/8 v3). All I had to do was change some APN settings and it works! I did a clean install with the ROM.
I ran it all day and did lose data at one point. I just had to turn off and on LTE in the bearer option and it was back again.

LTE works great on CM10, (08/10) , i noticed CM10 has Network Mode , hence why LTE works great.I switched to CM10 after being with AOKP since Captivate days.

Just to give an update, i asked Task650 to see if there are any plans to add "Network Mode" and he did not confirm mentioning the AOKP ROM currently only supports AT&T, so for the time being, if you are in Canada and like your LTE, try CM10, i have been running it since Friday with no issue.

edit: nm sorry ahh

I was having this issue with the AOKP rom and I missed the option to select from the Network settings for LTE. CM10 is much better as there is a configuration option I can select in the notification drawer to turn on or off LTE. Works great on my Telus Galaxy S3.

I fixed the issue when I stop using AOKP since all other roms worked fine on my phone even with all ATT roms..
Sent from my SAMSUNG-SGH-I747 using xda premium

Raul77 said:
Just to give an update, i asked Task650 to see if there are any plans to add "Network Mode" and he did not confirm mentioning the AOKP ROM currently only supports AT&T, so for the time being, if you are in Canada and like your LTE, try CM10, i have been running it since Friday with no issue.
Click to expand...
Click to collapse
I asked that question long time ago, and his answer was very arrogant and condecendent as far as us being in Canada. Something like "if you want LTE to work develop your own ROM", reason why I stopped using the ROM, any other ROMS work just fine.. with LTE and Network Mode...
Currently very happy with http://forum.xda-developers.com/showthread.php?t=1889449 and Ktoonz Kernel .. very good battery life lots of features.. in both ROM and ktoonz kernel

No 3G while running latest CM10!

I just got my S3 on Wednesday and didn't waste any time rooting it and flashing CyanogenMod 10. I like everything so far, but i'm having trouble getting 3G, or any mobile data.
It was working fine stock, and even after rooting, but after flashing CM10 I have no luck with it.
I go to school where i'm always roaming, but it's included in my plan. In my Mobile Data settings i've got it set to connect to mobile data even when i'm roaming, but I am never able to get it to actually work, whereas on my old Evo 4G running CM7, I had no problems with 3G service.
Has anyone else had this problem? I have too few posts to post in the development board, so it said to post here.
Thanks for any help!

Please read forum rules before posting
Questions go in Q&A
Thread moved
FNM
Sent from my SPH-L710 using xda premium

sorry, my mistake. I should also mention that i'm running one of the most recently nightly builds, 20121107 to be exact.

chadh92 said:
sorry, my mistake. I should also mention that i'm running one of the most recently nightly builds, 20121107 to be exact.
Click to expand...
Click to collapse
set it to cdma only

nicholaaaas said:
set it to cdma only
Click to expand...
Click to collapse
I tried that and had no luck. I decided to just go ahead and load up the last stable build of CM10, M2. I did that and I wasn't getting any service at all, so I flashed back to my nightly build 20121107, just to find out I was no longer getting any service on that either.
I decided to restore my original TouchWiz backup file, and now i'm not even getting service on that.
The Baseband and Build in the About Phone menu both include LJ7 in there, so I don't know where the hell my problem could be. If anyone has any advice, I'd really appreciate it. My GS3 is practically useless at the moment. I've also heard my IMEI may have been reset to all zeroes, but i've checked that and it's displaying normally.

Try updating your profile. Had a simular issue on my Epic 4g, couldn't get 3g to work even on stock, but after updating profile it worked.
Settings > system update > update profile

umby24 said:
Try updating your profile. Had a simular issue on my Epic 4g, couldn't get 3g to work even on stock, but after updating profile it worked.
Settings > system update > update profile
Click to expand...
Click to collapse
For me, the system update/update profile/update PRL options don't even exist. Galaxy s3 on sprint running cm10 stable

Warlock0187 said:
For me, the system update/update profile/update PRL options don't even exist. Galaxy s3 on sprint running cm10 stable
Click to expand...
Click to collapse
you have to flash back to a TouchWiz ROM

Went to settings & set wireless network to cdma only not lte. (Presuming you live in a Non lte area) that was my fix as well. And I also checked all roaming options as well. Ive been running cm10/aokp/TW roms without data loss. Try a fresh reflash after wiping data, cache, dalvik cache, and format system.
Sent from my SPH-L710 using XDA Premium HD app

[FIXED] Mobile data doesn't work with custom ROMS

Hello,
I purchased the new Nexus 7 LTE last friday. The very next day I unlocked, rooted, and installed the ElementalX kernel (with the stock ROM) . All worked well.
Sunday I tried installing a ROM (IceCold). It ran fine, and I was on wifi, so everything was working. Until I go out of my house. Mobile data was not working at all. I later reflashed stock, and did a factory reset. Mobile data worked again.
I thought it might just be the ROM, so I decided to instead flash P.A.C Nightly 4.3.1 with default kernel, and again, same issue. The mobile data icon is grayed out, unless I connect to wifi, and then it goes back to the blue color.
I have tried everything I could think of:
Restore stock recovery, kernel, and ROM.
Help would be greatly appreciated. Thanks ya'll.

Bump
Does no one have the same problems? Could this just be me missing something?

You are probably using a rom for flo Devices that do not have lte or 3g connectivity. Only use roms from the "nexus 7 (2013) LTE Android Development" forum!
Sent from my Nexus 7 using XDA Premium 4 mobile app

It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.

Dabarr said:
You are probably using a rom for flo Devices that do not have lte or 3g connectivity. Only use roms from the "nexus 7 (2013) LTE Android Development" forum!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, I checked this. The first ROM I tried installing wouldn't install because of it being for flo devices. However the next two were both made for deb devices. So that wasn't the issue. Thanks though.
raptir said:
It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.
Click to expand...
Click to collapse
This does make a lot of sense, could it be it's not reading the Sim correctly perhaps? I'll be sure to try this when I get the chance.

Most APN settings are easily found with search of the carrier name and APN. You may have to enter these manually.
Did you try mobile data before rooting and installing a ROM/Kernel?

Wrngway said:
Most APN settings are easily found with search of the carrier name and APN. You may have to enter these manually.
Did you try mobile data before rooting and installing a ROM/Kernel?
Click to expand...
Click to collapse
Data worked before during stock, and when I had a custom Kernel with the stock ROM. So the cause definitely had something to do with the ROM. After I reset everything (relocked and unrooted) it still works. I am redoing the unlock and root as I type this, and I will hopefully get a ROM installed and check to see if the APN settings really were the problem

Flare_ said:
Data worked before during stock, and when I had a custom Kernel with the stock ROM. So the cause definitely had something to do with the ROM. After I reset everything (relocked and unrooted) it still works. I am redoing the unlock and root as I type this, and I will hopefully get a ROM installed and check to see if the APN settings really were the problem
Click to expand...
Click to collapse
Well that's good news. The only reason I asked was to make sure it wasn't possibly hardware related.

raptir said:
It could be that the custom ROM you are trying does not include the APN for your carrier. Go to Settings -> More -> Mobile Networks -> Access Point Names. You will need to find the correct APN settings for your carrier. You could copy them down while you're on stock, or look them up online.
Click to expand...
Click to collapse
Wrngway said:
Well that's good news. The only reason I asked was to make sure it wasn't possibly hardware related.
Click to expand...
Click to collapse
Woot! APN settings fixed it. Thanks y'all. Definitely saved me a lot of hassle with my insane schedule I have going on, I appreciate it greatly.
Have a good one
-Matt

CM11 No Mobile Network, Mobile Network State Disconnected

Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.

I have the same problem. Been searching for a while and trying different fixes, but doesn't seem to be working. I'm on ATT galaxy S3, tho. If someone's got a working ATT S3 and let me know exactly what ROM, gapp, modem, etc they used, would much appreciate it.

Keyonwise said:
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
Click to expand...
Click to collapse
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.

This may work...
So, after trying countless options that i found on this site, and after dozens of flashing roms, modems, kernels, booloaders, restores, etc... turns out that i was doing everything right and there was nothing wrong with the install or the phone itself. After contacting my carrier (PTEL Mobile) for the third time, (first time they told me they had an outage, second time they told me to set the APN setting correctly - neither of which was incorrect on my end or the cause), they said they will try RESETting the DATA on their end. And guess what - that worked.
If you think you did everything correctly but still not getting data, i suggest you make your provider to do the same, or at least pry them as much as you can about your problem and what they can do about it. I wasted to much time and effort (my poor phone) on this and the solution was simple, and not my fault. Hope this helps others.

Mr. Struck said:
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
Click to expand...
Click to collapse
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.

S0lstice said:
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
Click to expand...
Click to collapse
Deleting asserts is only for d2spr specific builds, that doesn't apply to d2lte builds (hence the reference to "pre-unified builds" in my first post). Your issue is most likely also related to APN's. However, there are also known data issues on a lot of the latest CM nightlies, and also on the ROM's that rely heavily on CM as a code source. I would strongly recommend reading the last several pages of the thread for any ROM that falls into this category in order to see what other users are reporting along these lines.

CM11 No Mobile Network
Hey guys,
Noob here. I'm running CM11-20140428-NIGHTLY-jflte on a Galaxy S4 GT-i9507(international, optus) but bootscreen now says 9505(not sure if that's important).
I've had Mobile Network State: Disconnected for the last three nightlies. On CM11 M3 it was working all good, but now no luck.
So I've tried a few things and I've come to the point where I'm going to try the factory reset then reflash CM11 and fingers crossed it will work.
Can anyone talk me through the proper procedure for this? I've made a full backup on my external SD using CWM 6.0.4.7 and transferred it to
computer just in case. So would anyone be awesome enough to take me through it step by step.
Cheers,

hhmmm
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue

CM11 No Mobile Network
Ickyz said:
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
Click to expand...
Click to collapse
Just Fixed Permissions using Rom Manager, still no good.

Stock no APN settings at all
I have looked everywhere and found nothing for the last 3 weeks. I have a stock, sprint S3 on straight talk (my son's phone) it will not get 4g lte data what so ever. My phone is the exact same phone, and it does get 4g lte data. I tried all the basics ##72786# data on off check airplane mode...nothing. Mobile network state is "disconnected". So I opened data ##3282# to compare apn settings with my phone. I made sure everything matched, and when I get to "LTE APN Settings" I open it up, and nothing is there except APNs nothing, blank. Also missing is "Dial Up Networking" that option does not exist on my son's phone. He updated to kitkat (uggh) but the problem was present before that. Checked the phone, and it is not rooted. Funny thing is the phone updates with 4g lte running after dialing ##72786#, but that goes away after it completes. Texting works, but no mms (pictures etc.) and if I set it to cdma only it gets 3g, otherwise no data at all. Anybody?