This question should probably be in the thread for the rom.
The 3G connection is not working with Cyanogen CM7 build 32.
It was working with leedroid 2,3d.
Anybody got a clue?
Too bad that i need 10 posts before i can ask that question in the developer thread and report bugs.
I just flashed the latest radio without any better results.
This thread is correct to stay HERE..NOT in dev section, thats why the 10 posts rule
U should open a thread in dev section only if You developed something..
About the 3g connection, it works fine on my phone on latest cm7...maybe poor connection in ur location, i dont know
Sent from my HTC Desire
andQlimax said:
maybe poor connection in ur location, i dont know
Click to expand...
Click to collapse
That was not an alternative. But i received a bootloop on the phone after installing a theme. Full wipe and clean cache + dalvik.
Then it works!
It´s working now after a clean of dalvik cache and manually set APN under network settings.
lindahl85 said:
Too bad that i need 10 posts before i can ask that question in the developer thread and report bugs.
Click to expand...
Click to collapse
Doesn't Cyanogen have it's own forums? Surely you'd be better off there?
Aitese said:
Doesn't Cyanogen have it's own forums? Surely you'd be better off there?
Click to expand...
Click to collapse
This was why i wrote it in this thread...
Kali- said:
This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Click to expand...
Click to collapse
I was not able to make posts in that thread before 10 posts on the forum.
Same issue.
I am having the same issue. What do you mean by "manually set APN under network settings."?
Thank you.
Some APN settings from CM7 are not correct. You might need to manually enter these settings. You can usually find your carrier's APN settings either on their website or by calling them.
In CM7 go to settings, wireless & networks, mobile networks, then Access Point Names. You must delete anything listed by clicking on each one individually then clicking menu and choosing delete. Then you can add your settings by clicking menu then add on the main access point names screen.
Hope that helps!
Sent from my HTC Desire using XDA App
APN
I added the apn manually and it fixed the issue for me. I had the same problem on leedroid btw.
Thanks.
I'm having the same issue, I was going to try and clear the settings but in my ver. of GB I have nothing to clear, it list, "Data enabled" "International data Roaming" National data roaming" and "System select, Home, Affiliated, auto"
The first three are check boxes only, nothing else, is there another way to reset?
Thx
I also had 3g problem with defy and cm7, Fixed
I found an app in the app drawer called baseband switcher. I simply had to open the app, set it to US Tmobile and reboot. I set the default apn to tmobile and now I have 3g/hspa.
Of course I didn't notice this baseband switcher app until after I wiped the phone twice trying to fix this issue
I hope I can save someone else the time and hassle of reloads and reboots and apn renames.
Related
After i flashed 4.0.2 radio, i cant send mms anymore.. I got the apn from my mobile provider (Telenor), but its stuck on "Sending"...
Any one ?
Is mobile data enabled? Do you actually have a data connection? Unless your provider gave you the wrong information.
I still have lots of problems sending MMS. 4.0.2 running Android Revolution 2.1.2, with the leaked 4.0.3 radios. It was a problem when I was still 100% stock, too. Pretty bothersome.
3G, WiFi (which I'm pretty sure isn't supposed to work with MMS anyway), nothing. Sometimes when I reboot and retry sending it will go, but mostly just sits in sending mode forever. Frustrating.
Might just have a defective phone. Go back to stock and lock it up and take it to your phone company
Laynee1 said:
After i flashed 4.0.2 radio, i cant send mms anymore.. I got the apn from my mobile provider (Telenor), but its stuck on "Sending"...
Any one ?
Click to expand...
Click to collapse
go back to your previous radio? or pick another to test.
btw, radios are location and carrier specific..
which is why it works better for some an not others..
ppl should stop referring to radios with a link to rom versions..
s2d4 said:
go back to your previous radio? or pick another to test.
btw, radios are location and carrier specific..
which is why it works better for some an not others..
ppl should stop referring to radios with a link to rom versions..
Click to expand...
Click to collapse
****.. But i dont know what version of radio i had before i flashed it. And how to know whats best radio for my location ? Lol
Dial *#*#4636#*#*, Go to Phone information, scroll down to smsc, click refresh (NOT UPDATE) Exit out after the values are filled in the blank area.
Michigan Jason said:
Dial *#*#4636#*#*, Go to Phone information, scroll down to smsc, click refresh (NOT UPDATE) Exit out after the values are filled in the blank area.
Click to expand...
Click to collapse
Hmmmm, gives me 'Error refresh'
Goo into APN settings, hit the menu dots and select Reset to Default...
danger-rat said:
Goo into APN settings, hit the menu dots and select Reset to Default...
Click to expand...
Click to collapse
How do I get into APN settings?
________________________
Evo 4g LTE
TD CM10
TWRP
Bootloader 1.12 / S-on
After flashing the ICS (leaked) update, everything appeared fine. Realized later that I had no cellular data anymore. Has anyone else had this problem and have a workaround/fix? Would post in developer forum, but don't have enough posts to be worthy.
Colinmb said:
After flashing the ICS (leaked) update, everything appeared fine. Realized later that I had no cellular data anymore. Has anyone else had this problem and have a workaround/fix? Would post in developer forum, but don't have enough posts to be worthy.
Click to expand...
Click to collapse
get APN backup/restore and look up your APN details.
APN backup/restore doesn't work with ICS. Know of any other ways to tweak APN settings in ICS?
there is a thread in the main forum page 1/2 with apn settings, hit that thread then go to apn and create a new apn with the proper setting and see if that works.
Got it working. Thanks.
scott0 said:
there is a thread in the main forum page 1/2 with apn settings, hit that thread then go to apn and create a new apn with the proper setting and see if that works.
Click to expand...
Click to collapse
Can you please point me to the right posting? Ive been looking every where and searching trying to figure out why mine phone signal is grey. Everything was fine until I tried to flash the ics rom which went into loop so I restored from stock back up and everything has been hell. I cant even use any data period.
Baseband is MDM9200B-V18e-APR-04-2012-XX
Kernel 2.6.35.11+
Software P930-V10f-OCT-31-2011
I would like to try the apn check you were talking about but I cant find it and Im getting tired of not being able to use my data. Thanks
I have scoured this site (And others) for 2 days now and can't find anything really similar to my situation:
I am sure I will leave out some important details so please let me know what info you need to help me.
I flashed my GS3 with the latest nightly version of CyanogenMod from get.cm
it took some coaxing but I finally got through the status 7 error and got CM10 loaded and everything seems ok... Except I had no internet whatsoever... I could connect to wifi but no Mobile Internet...
When i go to the APN's, the "ATT LTE pta" is selected and all the settings are the ones recommended that I keep seeing around this forum as correct... Yet I get nothing. I have two "Preferred Networks" and it didn't seem to matter.
After some reflashing, restoring, and resetting to default and everything and still coming up empty, I chose the other APN that says "ATT wap cingular" and was able to get an "H" and "H+"
now I assume Thats HSPA and HSPA+ but I never get (And don't know the symbol for) LTE using CM... I drive to a big city that has LTE and never got anything other than H+.
Does this mean I don't have LTE?
Any ideas as to why I can't use the ATT LTE APN that everybody else seems to be able to use?!?
Any insight or recommendations would be great.
After you saw that there was no data did you perform a full wipe from recovery, meaning a "wipe date/factory reset" and also a cache and dalvik cache wipe? If not thats what Id suggest first and then reflash the rom and Gapps. Thats always the first step when trying to troubleshoot. In the main settings scroll down to "about phone" and make a note of the baseband version. Scroll up to "Status" and verify what the "Network"(ATAT), "Mobile network type"(LTE:13) and "Mobile network state"(CONNECTED) are listed as. To change any of these properties go to "Wireless&Networks"--more--. Select "mobile network" and make sure DATA ENABLED is checked. Network mode should say LTE/GSM/WCDMA. The APN needs to ATT LTE to use the LTE service. And finally select "network operators" and wait for the options to appear. Select ATAT, and then reboot the phone to see if any changes took hold. Another option would be to flash a different modem thru recovery. With CM10 the LTE service is shown with a "4G" icon vs a "4gLTE" icon on stock based roms.
Michael3214 said:
After you saw that there was no data did you perform a full wipe from recovery, meaning a "wipe date/factory reset" and also a cache and dalvik cache wipe? If not thats what Id suggest first and then reflash the rom and Gapps. Thats always the first step when trying to troubleshoot. In the main settings scroll down to "about phone" and make a note of the baseband version. Scroll up to "Status" and verify what the "Network"(ATAT), "Mobile network type"(LTE:13) and "Mobile network state"(CONNECTED) are listed as. To change any of these properties go to "Wireless&Networks"--more--. Select "mobile network" and make sure DATA ENABLED is checked. Network mode should say LTE/GSM/WCDMA. The APN needs to ATT LTE to use the LTE service. And finally select "network operators" and wait for the options to appear. Select ATAT, and then reboot the phone to see if any changes took hold. Another option would be to flash a different modem thru recovery. With CM10 the LTE service is shown with a "4G" icon vs a "4gLTE" icon on stock based roms.
Click to expand...
Click to collapse
I definitely did the first thing and tried a few different roms from the same site. I also tried the latest stable version of it with the same results.
I made a note of the baseband but where would I go to confirm that this is the right one?
Mobile Network type is HSPA10, Mobile Network State is DISCONNECTED,
Went to the settings and all the settings are as you suggest, AT&T is chosen as my network in network operators but still have he same issue.
When you speak about flashing a different modem...How would I go about that?!? And thanks for letting me know what the LTE symbol looks like... Now I KNOW that I don't have LTE
Thanks for everything
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
kennyglass123 said:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
My apologies... I read the rules and they stated that if you weren't sure, post it in general. I wasn't sure where help on tips went
Sounds like the same problem as I had. Ended up that the IMEI got set to 0. I don't have the links atm on my phone but try searching for how to fix the IMEI and no data problem the gs3s have some times. I'll provide the links in a bit if I can in a bit if that's the issue.
Sent from my SAMSUNG-SGH-I747 using xda premium
---------- Post added at 11:17 AM ---------- Previous post was at 10:45 AM ----------
Heres the links that helped me out if its the same issue..
[HOW-TO][FIX] Repair your IMEI with QPST - updated w/ info
http://forum.xda-developers.com/showthread.php?t=1802024
And
[FIX/TOOL] Backup/Restore/Fix IMEI & Data Restore Tool v3.0 - Updated 11/01/2012!!!
http://forum.xda-developers.com/showthread.php?t=1801997
Hopefully that helps.
This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326
My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.
khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.
Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.
I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?
no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.
did you try the fix in the op?
CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.
Just upgraded to 4.3 today but my data services don't seem to function well. Can someone please help me?
Same problem here..
Looks to be an issue with TWRP, have either of you tried the latest CWM recovery? I was hoping to avoid it since my nandroid backup was TWRP (I'm honestly not sure if there's a difference) but a few posts in the main threads are reporting a similar thing.
EDIT: Nope, same issue, at least for omnirom.
I take that back, it does work.
Go to Settings - Network Connections - More Networks - Mobile Networks - Access Points Names
Check and see if you have the APNs from your provider, they usually are 3 ([Provider] Internet, [Provider] WAP, [Provider] MMS - in my case). Make sure [Provider] Internet is selected. When I usually re-install some ROMs, the WAP APN is selected by default and that will show me the 3G data icon but it will not let me access internet resources with my data services.
If by any chance you are missing the Internet APN, search a bit on the internet for your provider APN settings for internet access.
Hope this works.
lolozaur said:
Go to Settings - Network Connections - More Networks - Mobile Networks - Access Points Names
Check and see if you have the APNs from your provider, they usually are 3 ([Provider] Internet, [Provider] WAP, [Provider] MMS - in my case). Make sure [Provider] Internet is selected. When I usually re-install some ROMs, the WAP APN is selected by default and that will show me the 3G data icon but it will not let me access internet resources with my data services.
If by any chance you are missing the Internet APN, search a bit on the internet for your provider APN settings for internet access.
Hope this works.
Click to expand...
Click to collapse
It just acts like there's no SIM card at all. I don't understand it completely, but CWM is doing something that TWRP is not (or vice versa) and is causing this issue. Took my 7105T from virgin vanilla stock to the omnirom 4.4.2 nightlies yesterday and when I flashed from CWM the issue was resolved.
That said though, I'm unsure how this will affect omnirom's updates so I might need to switch to cyanogenmod. Shame, because I do prefer TWRP.
BadKingDookie said:
It just acts like there's no SIM card at all. I don't understand it completely, but CWM is doing something that TWRP is not (or vice versa) and is causing this issue. Took my 7105T from virgin vanilla stock to the omnirom 4.4.2 nightlies yesterday and when I flashed from CWM the issue was resolved.
That said though, I'm unsure how this will affect omnirom's updates so I might need to switch to cyanogenmod. Shame, because I do prefer TWRP.
Click to expand...
Click to collapse
try to change different modems.
i hope it will work
dont worry, it happened to me also
Kindly check ur imei if its generic 0034*****
I got the same problem also
Sent from my GT-N7100 using xda premium
try to revert to original stock rom
sabharwalrahul91 said:
Kindly check ur imei if its generic 0034*****
I got the same problem also
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Try to change modems.
ken_alpha24 said:
Just upgraded to 4.3 today but my data services don't seem to function well. Can someone please help me?
Click to expand...
Click to collapse
try to factory reset your device
it seems you missing your IMEI
it happens in some device,,,
or if you still have warranty just go to your retailer
Problem solved. Got to the service center to reflash FW. Ty guys
Sent from my GT-P3110 using xda app-developers app
cant access apn settings after 4.3 update
ken_alpha24 said:
Problem solved. Got to the service center to reflash FW. Ty guys
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
I don't know what you guys are talking about but I can't even access the APN settings, its invisible. I have a SCH R950 note 2. H2o wireless already took my money but told me I needed to unlock it, even though I can't unlock a CDMA phone. im so confused because it is quad band and has sim card slot but no one can unlock it and I cant find how to flash to h20