Develop Bugs

[Q] Can't send sms and greyed bar after cm 10.2

Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Edit: It's a sgh-t999v as printed behind the battery. I followed this guide http://forum.xda-developers.com/showthread.php?t=1775616 hence the reason why I'm coming from ICS. Looks like I'll have to reflash using ODIN which i was trying to avoid out of fear of bricking but it seems like my only option now.

kyuubie said:
Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Click to expand...
Click to collapse
Might not be the right ROM for your phone. Or it could be buggy. I've messed around with a few and finally found a great one that seems to be working well for me. I have the d2ltetmo. I'm running Liquid Smooth ROM with 4.2.2 and TWRP 2500 recovery. The ROM roots your phone as well. Any questions feel free to ask. Hope I can help!:cyclops:

I wouldn't flash D2MTR Rom to D2TMO. Too many differing things. There's a CM for D2TMO too.

Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk

serio22 said:
Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well after a long process of flashing stock jb then finding a proper method of flashing cwm since i had difficulties with fastboot and went with the dd if-of method using the terminal emulator. I am finally on a stable cm 10.2 rom, d2tmo, where everything seems to be working and intact. Thanks for the advice now i have the long process of restoring my apps and data and what not with titanium backup.

CM11 No Mobile Network, Mobile Network State Disconnected

Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.

I have the same problem. Been searching for a while and trying different fixes, but doesn't seem to be working. I'm on ATT galaxy S3, tho. If someone's got a working ATT S3 and let me know exactly what ROM, gapp, modem, etc they used, would much appreciate it.

Keyonwise said:
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
Click to expand...
Click to collapse
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.

This may work...
So, after trying countless options that i found on this site, and after dozens of flashing roms, modems, kernels, booloaders, restores, etc... turns out that i was doing everything right and there was nothing wrong with the install or the phone itself. After contacting my carrier (PTEL Mobile) for the third time, (first time they told me they had an outage, second time they told me to set the APN setting correctly - neither of which was incorrect on my end or the cause), they said they will try RESETting the DATA on their end. And guess what - that worked.
If you think you did everything correctly but still not getting data, i suggest you make your provider to do the same, or at least pry them as much as you can about your problem and what they can do about it. I wasted to much time and effort (my poor phone) on this and the solution was simple, and not my fault. Hope this helps others.

Mr. Struck said:
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
Click to expand...
Click to collapse
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.

S0lstice said:
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
Click to expand...
Click to collapse
Deleting asserts is only for d2spr specific builds, that doesn't apply to d2lte builds (hence the reference to "pre-unified builds" in my first post). Your issue is most likely also related to APN's. However, there are also known data issues on a lot of the latest CM nightlies, and also on the ROM's that rely heavily on CM as a code source. I would strongly recommend reading the last several pages of the thread for any ROM that falls into this category in order to see what other users are reporting along these lines.

CM11 No Mobile Network
Hey guys,
Noob here. I'm running CM11-20140428-NIGHTLY-jflte on a Galaxy S4 GT-i9507(international, optus) but bootscreen now says 9505(not sure if that's important).
I've had Mobile Network State: Disconnected for the last three nightlies. On CM11 M3 it was working all good, but now no luck.
So I've tried a few things and I've come to the point where I'm going to try the factory reset then reflash CM11 and fingers crossed it will work.
Can anyone talk me through the proper procedure for this? I've made a full backup on my external SD using CWM 6.0.4.7 and transferred it to
computer just in case. So would anyone be awesome enough to take me through it step by step.
Cheers,

hhmmm
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue

CM11 No Mobile Network
Ickyz said:
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
Click to expand...
Click to collapse
Just Fixed Permissions using Rom Manager, still no good.

Stock no APN settings at all
I have looked everywhere and found nothing for the last 3 weeks. I have a stock, sprint S3 on straight talk (my son's phone) it will not get 4g lte data what so ever. My phone is the exact same phone, and it does get 4g lte data. I tried all the basics ##72786# data on off check airplane mode...nothing. Mobile network state is "disconnected". So I opened data ##3282# to compare apn settings with my phone. I made sure everything matched, and when I get to "LTE APN Settings" I open it up, and nothing is there except APNs nothing, blank. Also missing is "Dial Up Networking" that option does not exist on my son's phone. He updated to kitkat (uggh) but the problem was present before that. Checked the phone, and it is not rooted. Funny thing is the phone updates with 4g lte running after dialing ##72786#, but that goes away after it completes. Texting works, but no mms (pictures etc.) and if I set it to cdma only it gets 3g, otherwise no data at all. Anybody?

[Q] I installed a new ROM, now I have no cell service.

So the warranty on my SGH-I747m just expired, so today I decided to install a custom ROM. I installed CWM, made a backup, then flashed the latest d2lte nightly of CarbonRom. Now I have no cell service, and my APN menu is blank. If I try to enter in my APN settings manually and tap 'save', it doesn't save - the list remains blank. I tried downloading Tweakker's APN app, and it says I have no SIM card!
I know my SIM card works perfectly fine, because I was making calls and texts and had internet just hours before I decided to install this ROM. So what the heck is going on here?! This would be the third Android device I have installed a custom ROM onto, all on the same carrier, and none have given me this trouble before.

Is your bootloader and modem up to date?

audit13 said:
Is your modem up to date?
Click to expand...
Click to collapse
No, lol. I updated the modem, that ended up fixing it, thanks

[Q&A] [ROM] [4.4.2] [d2lte] [OFFICIAL] LiquidSmooth v3.0 Beta

Q&A for [ROM] [4.4.2] [d2lte] [OFFICIAL] LiquidSmooth v3.0 Beta
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.2] [d2lte] [OFFICIAL] LiquidSmooth v3.0 Beta. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

I have a problem with my s3 i've flashed several different ROMS and this one is no different...for some reason the APN's for my particular model, (unlocked at&t i747) converted to tmobile) never shows up, how can I fix this...I've tried putting in the APN but it never saves

How to Flash
Hello,
I'd like to try the LiquidSmooth ROM but I'm not sure how to go about flashing it. Does the ROM come with the kernel or will I have to flash that separately? I've flashed other ROMs before but I'd like to make sure I do this correctly to avoid bricking my phone. Also I'm not sure which ROM is the correct one. I just want the most stable one. Is drdevs.com/devs/teamliquid/Official/3.1/S3_Unified/) the correct one? (sorry it won't let me post links)
My information:
Model: SAMSUNG-SGH-I747 (AT&T)
Currently running CyanogenMod11 20141008-SNAPSHOT-M11-dtle
Android Version: 4.4.4
Baseband: I747UCUEMJB
Kernel: 3.4.104-cyanogenmod-g0c6f5bf
I am currently using TWRP recovery
So I'm planning on doing this the following step. Is this correct? :
1. factory reset, wipe data, system, cache, format data
2. adb push the rom and gapps
3. flash the rom and gapps
4. wipe dalvik + cache
5. reboot
Is that correct?
Also I read that I'm supposed to backup my IMEI/EFS/NV. How do I go about going this? I tried copying my efs folder from Root Browser but it says access denied.

No Mobile Data on SGH-I747 LiquidSmooth 3.2 Milestone
I have previously been using LS (LS-KK-v3.2-2014-08-06-d2lte.zip) on my GS3 without issues. I then tried updating to the LS 10-27-2014 nightly (LS-KK-v3.2-2014-10-27-d2lte.zip), the LS Milestone (LS-KK-MileStone-3.2-d2lte.zip), and the LS 10-5-2014 nightly (LS-KK-v3.2-2014-10-05-d2lte.zip). On all of these newer editions, the phone is unable to use mobile data, but calling/texting works fine. On the status bar, the mobile signal shows strong, but does not show "LTE".
When I'm having the issue, Under Settings -> About Phone: Mobile Network type is LTE. Service state is Voice/Data in/service. Mobile network state is Disconnected. Mobile Phone Number is Unknown.
I tried adding the AT&T APN without success. Wifi works fine as well, but no mobile data connection can be established. I tried flashing and reflashing these roms multiple times without success.
When I flash back to LS-KK-v3.2-2014-08-06-d2lte.zip I am able to use mobile data fine. Can anyone provide some guidance as to what would cause this?

You may need a kk bootloader and modem for the latest ls.

prolificpaul said:
I have previously been using LS (LS-KK-v3.2-2014-08-06-d2lte.zip) on my GS3 without issues. I then tried updating to the LS 10-27-2014 nightly (LS-KK-v3.2-2014-10-27-d2lte.zip), the LS Milestone (LS-KK-MileStone-3.2-d2lte.zip), and the LS 10-5-2014 nightly (LS-KK-v3.2-2014-10-05-d2lte.zip). On all of these newer editions, the phone is unable to use mobile data, but calling/texting works fine. On the status bar, the mobile signal shows strong, but does not show "LTE".
When I'm having the issue, Under Settings -> About Phone: Mobile Network type is LTE. Service state is Voice/Data in/service. Mobile network state is Disconnected. Mobile Phone Number is Unknown.
I tried adding the AT&T APN without success. Wifi works fine as well, but no mobile data connection can be established. I tried flashing and reflashing these roms multiple times without success.
When I flash back to LS-KK-v3.2-2014-08-06-d2lte.zip I am able to use mobile data fine. Can anyone provide some guidance as to what would cause this?
Click to expand...
Click to collapse
I am not facing this issue on any of the builds you mentioned.
I am using i747mvlufnh2 bootloader and i747mvlufnh2 baseband.
audit13 said:
You may need a kk bootloader and modem for the latest ls.
Click to expand...
Click to collapse
Agreed
Sent from my SGH-I747M using Xparent Cyan Tapatalk 2

I'm running the latest version 10-27, leankernel 9.17, NE4 bootloader. Everything is working fine, no problems with lte or camera, however I can't receive phone calls. I can make a call but whenever someone tries to call me they say the phone will ring once or twice then goes directly to voicemail. Am I missing something in the settings? This was a clean install, as always.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

MetalHead66 said:
I'm running the latest version 10-27, leankernel 9.17, NE4 bootloader. Everything is working fine, no problems with lte or camera, however I can't receive phone calls. I can make a call but whenever someone tries to call me they say the phone will ring once or twice then goes directly to voicemail. Am I missing something in the settings? This was a clean install, as always.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Nevermind. Fixed it. Went back to Carbon.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Audio not working after flashing multiple 4.4 and 4.2 roms
Hello, I use a Samsung galaxy s3 i747 at&t. I have rooted and flashed a couple of custom roms(liquidsmooth, slimkat, beanstalk, etc) but I did notice that I couldn't use my earpiece with it. Anytime I play a song on my phone with any music app, and I insert my headphones, it losses audio and even when I unplug the earpiece no sound comes out of the phone speaker again until I have rebooted the phone. And after a reboot, If I try the earpiece again, I end up with the same result. I don't know what to do? Please any useful solution would be highly appreciated because I have no rom on it now...

Notification Sound setting is always on silent
I have been running the LS rom for about a month now and really like it. I have the latest 3.2 milestone and running the 9.17 kernel. The only issue that i can't seem to get around is my notification sounds for SMS messages (default messenger or hangouts) always shows 'silent' even though when I try to choose a sound one is selected. I actually this is affecting all app notifications, ie google mail, but i don't care as much about thos.e. Has anyone else have this issue? I have done all the normal things like reinstalling the ROM, clearing cache, reset, etc. Please let me know what else i can check. I have searched the thread and xda but can't seem to find anything specific to this issue recently.

No data connection, authentication problem for wifi
Just flashed this rom the other day and it boots up and is functional but will not connect to data nor wifi. It consistently says no service and when I try to connect to wifi it says there is an authentication problem. I came from an older liquid smooth rom. I have a cricket sim card in my at&t s3, not sure if that matters

Cannot SEND SMS Tried Everything Please HELP :(

All of a sudden today I cannot send SMS.
I was on a really old build of Cyanogenmod12 (April 22nd I believe) as any time I tried to update to newer Nightly builds I lost all Sprint service could not make/receive calls or texts, etc.
I decided I was pretty fed up with CM12 so I decided to go ahead and migrate to AICP. I wiped everything TWICE in recovery, loaded up AICP and it works fine, I get LTE signal, etc. However I cannot SEND SMS, I can RECEIVE SMS I just cannot SEND. I had done some data restores with Titanium and I figured that somehow some way that might be messing with things. So I did another 100% fresh install after wiping everything.... I can send/receive calls, receive SMS but I cannot SEND SMS
I am really at a loss here guys, ANY help would be greatly appreciated

*#*#4636*#*# change it to CDMA wait 30 seconds send an SMS and do *#*#4636*#*# again change it back to late/CDMA n should be ok
Sent from my SM-N910P using XDA Premium HD app

pbedard said:
*#*#4636*#*# change it to CDMA wait 30 seconds send an SMS and do *#*#4636*#*# again change it back to late/CDMA n should be ok
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
I stayed up all night last night working on this, let me update the thread with what I have done so far.
I was looking at some stockish ROMs and I noticed that there were warnings on some of them stating that you needed to have the Sprint OTA 5.0 update installed prior to flashing, which I actually never got. My phone came out of the box with Kit Kat and I never installed the 5.0 update, I went straight to CM12 5.0 instead. So I had a theory that there might possibly have been some sort of network data profile, etc or something out of that official 5.0 OTA that I never got that was somehow causing me problems. I decided to revert back to complete bone stock.
I wiped everything and flashed the N910PVPU1BOB7 file (MD5 = 7304e42cf0e241553d8db9e3c3eeed81) which was the official Sprint 5.0 OTA. Loaded it up, updated the PRL, Network Data Profile, etc, etc, etc.... everything works (relatively speaking...... TouchWiz sux balls of course). I have LTE signal, I can send/receive calls, I can send/receive SMS... all good.
So at this point I decided to re-wipe and flash AICP, with the emotion Kernel (latest builds on all). Load it up.... same problem as before. I have LTE signal (stronger than on the stock Sprint ROM), I can send/receive calls, I can receive SMS but I still CANNOT SEND SMS
I tried a few things at this point. I tried to manually reset the Sprint network connection on the phone by dialing ##72786#, this did not work, it returned an error "incorrect MIM code". I tried the *#*#4636*#*# that I have seen suggested in multiple places, this also did nothing, it returned an error "incorrect MIM code". I also noticed on the "mobile networks" tab, and this is true for BOTH CM12 and AICP, that it has the setting at "Global" by default and everything works with exception of sending SMS. Now when I click that tab it only has 3 options LTE, 3g, 2g.... for some reason "global" is not an option, neither is CDMA. Whenever I select LTE it automatically drops me from the Sprint network PERMANENTLY until the ROM is re-flashed there is no way to reverse this. I cannot even dial the manual programming codes "*#* etc" as it just simply says "no network service". If I try to automatically connect to the sprint network through the network operators tab it does in fact find Sprint as my provider, however if I click on Sprint to connect it processes for about 2-3 minutes and then simply returns an error of "cannot connect to the network at this time, please try again later". Again the only way to reverse this is to re-wipe and re-flash again which puts it into the unselectable "global" network setting by default where then I will have LTE signal, I can send/receive calls, and can receive SMS but not send SMS.
So that is where I am at, I stayed up all night last night wiping, flashing, and testing different things over and over. Nothing seems to work 100%, except the stock 5.0.1 OTA which is what I am on now. I really hate TouchWiz and for some reason I get a much weaker LTE signal on stock compared to either CM12 or AICP (I have no clue why this is). I am really at a loss here why everything works on the custom ROMs except for sending SMS..... willing to try almost anything to go back to a custom ROM.
Let me know if you guys have any other ideas.

Well great news I have finally resolved the SMS send issue
pbedard said:
*#*#4636*#*#
Click to expand...
Click to collapse
pbedard had tried to help me with the above post (which I appreciate, thank you), and I have seen the same advice in other threads. One slight problem though, he slightly mistyped the manual programming code it is actually *#*#4636#*#* not *#*#4636*#*# which I had tried entering ohhhhh I dont know 30 times? :silly: And it always returned an "invalid MMI code".
I had tried everything and after spending a full day on TouchWiz I was determined to fix the issue so I could go back to a custom ROM. I was even manually creating and deleting APNs, etc. Nothing would work. Right as I was about to finally give up (after literally 12hrs of researching the issue and testing fixes) I was reading the official CM 12 thread and came across the "fixes" post:
http://forum.xda-developers.com/showpost.php?p=57613217&postcount=3
Because I had tried entering the manual programming code so many times I happened to notice that the last 4 key strokes were not what I had been entering. I entered the correct programming code, boom the Phone Info menu pops right up I follow the directions and what do you know send SMS finally works .... wow what a relief, I am on the latest AICP release on the emotion Kernel and everything works like a charm.
Also by setting the phone to LTE/CDMA through the manual programming menu I have the strongest LTE signal by far, full 100% bars at all times (I live right next to a Sprint tower). I have never understood why I only got 1-2 bars on the stock ROM and 3-4bars on CM12/AICP through the default settings. Anyway thanks for help and I will list out exactly what I did to get it working.
- 100% Stock ROM
- CF Auto Root and TWRP install through Odin
- Reboot to recovery
- Wipe Dalvik cache, system , data, and cache
- Reboot to recovery
- Flash emotion kernel (optional)
- Flash latest AICP build (or custom ROM of your choice)
- Flash latest stock Gapps
- Reboot system
- Confirm Google Messenger is the default SMS app (it will already be if you flashed 5.1 stock Gapps)
- Dial *#*#4636#*#* ("Testing" menu screen will pop up, select "Phone Information")
- Scroll down to "Set preferred network type" click it and scroll up and set it to "CDMA auto (PRL)"
- Wait until 3G signal comes online (takes about 10 seconds)
- Change "preferred network type" to " LTE/CDMA auto (PRL)"
- It should take another 10 seconds for LTE signal to come online and you should be good to go to send and receive SMS ! :good: