Develop Bugs

Body Glove Tactic Brushed White/Charcoal case for HTC One

Hey peeps, today my new Body Glove case arrived! I went on to put it on and I liked it so much I wanna recommend it to you guys! First off, if your not a fan of thick cases, then you might not like this one too much. I consider this case to be more of an alternative to the other dual layer cases like Speck's candyshell. They're very alike, except this one does not cover the volume buttons (kinda disappointing...). Anyways, I took a couple of pics of the case itself so you guys can see it! It's really a good case! Hope you enjoy the pics! Click on 'em to view full size, I still don't know how to post them full size'd
First up, the front of the case. It has a very nice lip/bump there to protect the screen of the phone if you decide to place it on a table facing down or if it falls screen first to the ground:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next, the back (it's a white plastic with matte finish, it actually feels good to the touch and it's comfortable to hold) with the Body glove logo on the back there. It feels great to hold as it is a bit curved like the One's curved aluminum back, so it fits naturally in your hand:
Now, inside the case! That kind of cratered looking pattern is rubber, like that of the first layer of the Speck candyshell or the Otterbox commuter, except that it's part of the plastic exterior so it can't be removed):
Here's the camera and noise canceling mic openings. If you ask me, they're perfectly cut out and positioned to precision! Plus that silver backing really shows off how well cut out it is:
Now here's where most of the cases miss (even the Poetic Atmosphere case, which I bought and should arrive tomorrow or after), the bottom openings! This case actually resembles the Speck candyshell in the fact that both have very very precise openings (though the Speck case's opening is narrower, it's still perfectly centered):
Next, power button and headphone jack! As expected, nice cut out for the power button/IR blaster and the rubber lining is actually cut lower there so it's easier to press the button without having to reach out to the very top of the phone. Headphone jack cut out is pretty widely cut, making sure most headset plugs will fit:
The volume buttons are exposed, like mentioned before, but there's still some lift from the case, so the buttons themselves are protected in case you drop the phone. This also makes buttons easy to press, as opposed to other cases that make pressing them much harder because of having rough rubber coverings. This is not the case with Speck cases, fortunately (I know as I own a candyshell one):
However, you trade in comfortability of pressing the volume buttons for oddness and premium feel. As you can see, the little rubber lining lip that covers the glass where the volume buttons are is very loose because of not being glued to the plastic backing or having any support. This makes it feel kinda cheap. The rubber itself is placed perfectly and does not show this stretching when left alone, but I fear that with time this rubber piece might stretch and get in the way or maybe eventually break:
Here you can see the lift provided by the bump/lip on the case. It's at what I consider a perfect level as it doesn't make the case look huge like the otterbox defender and it's easy to touch the corners and edges of the screen with it on.
Here's what the entire back of the case looks like with the phone on. I just fell in love with the whole look of the silver One with the white/grey case! You can see as the rubber linings stretch to the back too, so when you put the case on a table it's that much less probable of slipping and falling:
The sides also have a cool design, with rubber grips on the sides that make holding the case that much comfortable and less probable of it sliding from your arms. The whole design of the case makes it look modern and very cool!:
Here's a little close up of how the rubber grips look! Also, damn it looks sexy from the side!:
Finally, just a look at the front of the One with the Body Glove case put on. The case itself isn't that bulky, it's even slimmer than the Speck candyshell! It's also a lot better looking for me. The only thing I miss is the soft and easy to press volume buttons cover found on the Speck candyshell case. Other than that, this case is a lot better!:
So, yeah. Thats about it I hope anyone that saw this post and the pics enjoyed. If you have the Speck candyshell and don't feel like it's the right case but you like the protection it gives you, or just hate the glossy finish, you should check this case out! It's also available in Pink/Silver and in Charcoal/Black!
Link to buy case: http://www.bodyglovemobile.com/cell-phone-cases/htc/one/tactic-brushed/
Nice day, peeps!

Very nice review! I'll be looking into this case!
Sent from my Nexus 7 using xda premium

naveen94 said:
Very nice review! I'll be looking into this case!
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thanks I'm really enjoying how good it feels in the hand and how great it looks, personally I love it! Hope you enjoy yours if u decide to get it! :good:

naveen94 said:
Very nice review! I'll be looking into this case!
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
13.00 dollars on amazon just ordered one....

Philly Jim said:
13.00 dollars on amazon just ordered one....
Click to expand...
Click to collapse
Awesome! I got mine for $9 on ebay, came in bulk package but it was new. Hope u enjoy yours like I'm enjoying mine :highfive:

Hyperion Case. Perfect black minimal TPU with dimple cutout.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No branding. Buttons are dimples, work fine. Cutouts are perfect.
Mix of matte and gloss black.
TPU is tight and resistant to pulling off the edges of the screen.
Ordered late Friday night, got Monday morning.
http://www.amazon.com/Hyperion-Moto...id=1378838209&sr=8-1&keywords=hyperion+moto+x

Looks pretty good. Question: The amazon title says "and screen protector." This isn't a case with a built in screen protector, is it? I have a screen protector on mine already, so I don't need a case that has a screen protector built in, like an Otterbox or something. Just want a snap on case. So provided that it's just a case and a screen protector comes separately, how's the case fit regarding the screen? Does it seem like it'd interfere with a screen protector? Thanks

Screen protector is not part of the case. Just received this. Very nice

Awesome, thanks for the reply. Sold it for me, buying now

It just includes a cheapo plastic stickon protector.
The edge that wraps around the front is small, shouldnt interfere with any normal screen protectors.

You also have the quicksand case right? Which do u prefer this or the quicksand?

seanrobot said:
You also have the quicksand case right? Which do u prefer this or the quicksand?
Click to expand...
Click to collapse
Quicksand is obviously slimmer. The sandy texture is nice.
This provides WAY more protection though. The matte texture is also nice.
It's a matter of what you need.

Just got this Hyperion case in. Perfect cutouts, perfect form factor still kept (it's very slim). $6-7 on Amazon, can't be beat.

+1 from me. I've got the clear case, nicely shows off moto maker colors while still giving it that bit of extra protection.

I also ordered this one and was pleasantly surprised.
Sent from my XT1058 using XDA Premium 4 mobile app

wow that does look pretty good great find

I am waiting for the car sick to be released to see if it has limitations on case size. Hope they hurry before it is too late and I break this thing. This one looks good and cheap enough to just go for not knowing.
Sent from my XT1060 using XDA Premium 4 mobile app

I just ordered the Smoke colored one.

clankfu said:
I just ordered the Smoke colored one.
Click to expand...
Click to collapse
Got it today and love it. Wondering if I should've ordered the clear one though so I could see more of the back.

I got the frost clear one for a white moto x and it looks really good. The back has a nice matte feel to. I think this is the best tpu case for the moto x. I'd like a simliar hard case that is below 10$ but I can't seem to find one. Clear, dimple cut out, thin with a little lip for lay on the table.

Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.

finalarcadia said:
Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.
Click to expand...
Click to collapse
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.

clankfu said:
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.
Click to expand...
Click to collapse
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.

finalarcadia said:
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.
Click to expand...
Click to collapse
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.

clankfu said:
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=jmuE7QixQIg
Was that one. Discontinued or something, was never able to buy it again.

Orzly fusion "bumper" case

http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one

Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.

goofball2k said:
Just got mine today, black. Not sure I'm thrilled with it. It's thinner than the Tudia Dual. Doesn't feel as protective. It didn't "hug" the phone as well as I was hoping it would, the Tudia is a nice slim snug fit. Not much of a lip over the front of the phone screen. The silver bezel on the top/bottom of the phone is visible with it on.
Click to expand...
Click to collapse
could you please take some pictures of it with your phone in it?

no_username_available said:
http://www.amazon.ca/Orzly®-Protect...=1418949023&sr=8-11&keywords=oneplus+one+case Ill be ordering one soon since it looks wicked. has anyone used this case? Im gonna try it and report back in case anyone wants to get one
Click to expand...
Click to collapse
Here's a video to it if it helps....
If anyone has got the case pictures of it would be super helpful.

thanks i just wished it didn't expose any of the silver trip on the bottom or top. I ordered a diztronic instead

Orzly Fusion on my Bamboo OPO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

There's something strange, something wrong on this case...

Just an update, I stopped using the Orzly Fusion case, even on the Bamboo the case is loose (or maybe because it's on the Bamboo and it's thicker so it's not hugging the phone properly).

posted this on google+ originally
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr

bigballa said:
Orzly Oneplus One case came in yesterday. Very satisfied and happy that it fits perfectly with the Bamboo Swapstyle cover. The buttons are tough as hell to press but it's not a deal breaker. Plus the shine effect the clear back gives to my OnePlus is a beauty.
my google+ link to original post and the comments in there where people were discussing fitting.
https://plus.google.com/u/0/114392856655579165100/posts/8Ci13tHwsBr
Click to expand...
Click to collapse
Clench your phone, as if you're trying to compress the lips over your phone sides, you will feel like it has movement as if it really is loose.

I found the same thing. Fit is nowhere near as snug as I would have liked it to be, and I would have much preferred a bit more lip for screen protection.

I just received this too. It's an okay case.. NOT a fan of clear rears. But for 5 bucks not bad.

...
Iv had this for about 2 weeks. i love the case. I believe bigballa on the xda community has posted some really helpful pics. The fitting around the sides is perfect and access to all ports is spot on as well. Iv read some odd amazon reviews but i really cant fault this case. Shows the back of my phone nicely whilst offering great protection

kind of glad i got the diztronic instead, is recommend it I might pick up the fusion later on

Remove back Plastic
Hi,
Same here seems that it is realy thinn and not so protective. We will see after some drops (I hope It will not happen soon).
I remove all the plastic back part (with a dremel: Grinding and Cuting head) to preserve the sandstone back feel of the phone and to keep the weight down. Its is quite good, the case is still well in place, not so loosy. There is a litle loose in the midle of the long border. If I redo this operation I will keep a litle platic stripe between the midle of the long borders.
I will try to cut the back of an Diztronic case to compare the overall rigidity.
Regards,

+ 9h nilkin tempered glass screen protector
I've had the clear version of this case for about a couple months and have dropped it several times. No damage, just some small chips on the edges of the nilkin tempered glass screen

I have the case about 5 days, but I send it back, there are some problems with it.
First the polycarbonat back scratches really easy and looks bad, second is the case not fits at the top and bottom, so there can enter a lot of dust.
I can not recommend this case

The back transparent easy to scratch. Demmittt.

I actually really love this case. It is much slimmer than the ringke fusion and actually maintains the shape of the opo with minimal bulk. Also, I made my own template (much like I did with the ringke fusion) So I can have custom backs.
The one downside is quality control though. When I got the case, one of the plastic protective sheets was positioned halfway down the back and there was a small scratch on the top right hand corner.
That said, this is still my favourite case.
Sent from my One A0001 using XDA Premium 4 mobile app

I was considering buying this, but what you guys said, made me change my decision and I bought the pelosi case.. Perfect fit, sandstone feeling and very slim fit

Xperia Z4 Case list and Tempered Glass list

So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?

Where did you order it from?

did you search in sonymobile dot com ?

Could show me link? Thanks!
Could show me link? Thanks!

For phone cases I only trust spigen and otterbox, too bad they don't make cases for Z4. Maybe I should wait.

Roigi.Manson said:
So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?
Click to expand...
Click to collapse
http://www.spigen.com/collections/sony/products/sony-xperia-z4-case-ultra-hybrid?variant=2418853249

Explosion proof tempered Glass.

Roigi.Manson said:
So far otterbox and spigen etc. seems are busy on samsung galaxy case,and there are no Z4 Cases on their sites, my Z4 is on the way and look for a solid case&glass to get protection, any reliable ones to recommend ?
Click to expand...
Click to collapse
If you go on Amazon it should be pretty easy to find, there are a few good companies out there doing cases and screens for this handset. I would generally go with what I know, and also look at the customer reviews.

CASE Brand
dizzyman44 said:
For phone cases I only trust spigen and otterbox, too bad they don't make cases for Z4. Maybe I should wait.
Click to expand...
Click to collapse
I have not bought a case from spigen or otterbox. How about the price and looking?

Edith G said:
I have not bought a case from spigen or otterbox. How about the price and looking?
Click to expand...
Click to collapse
They are like queen and king in phone case industry. They both look stylish and sturdy. You can check them out on amazon for price, at least affordable to me.

They look very nice. Thanks for sharing.

If you go on Ebay it should be pretty easy to find, there are a few good companies out there doing cases and screens for this handset. I would generally go with what I know.

I have bought some from witrigs no matter the case, tempered glass or replacement parts.

Has anyone had any experiences with a bumper case for the Z3+, for instance this one here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.co.uk/gp/product/...bumper case&qid=1438705127&ref_=sr_1_2&sr=8-2
Considering the back remains uncovered: how scratch resistant is the back generally? Is it Gorilla Glass?
Thanks!

TinXpH said:
Considering the back remains uncovered: how scratch resistant is the back generally? Is it Gorilla Glass?
Click to expand...
Click to collapse
What he said!
How does it fare with scratches etc?
Edit: haha wow, forgot I made that sig... bit out of date now

Sn0wHookr said:
http://www.spigen.com/collections/sony/products/sony-xperia-z4-case-ultra-hybrid?variant=2418853249
Click to expand...
Click to collapse
I've got that case; it's pretty good, has a lip to keep the screen off the surface of a table if you put it face down. Main downside is that the SIM/MicroSD card tray is cut out so the surrounding plastic on the screen surface is thin. Over time I'm worried this may get weakened.
The Ringke Fusion looks good, however the one I had for the Samsung S4 had issues putting in large headphone jacks (e.g. Etymotic ER-4, Sony MDR-7506) and the headphone jack hole on the Z3+ case looks even smaller if that's possible. No issues with headphone jacks and the Spigen .

A while ago I ordered this case:
http://www.banggood.com/Nillkin-Sup...k-Cover-Case-For-Sony-Xperia-Z4-p-991532.html
Takes a while to be delivered, a month for me, but it really is a nice case. Pretty slim, but it is is rather firm. Adds a nice grip to the phone, due to the 'soft' feel of the plastic. It covers just the back and the left and right side, but it's edges extend just half a millimeter to protect the other sides of the the phone as well, even when it lies face down. The holes for all the buttons are nice and tidy. And bang-for-the-buck-wise, it really is a no brainer

Got the Spigen one because I got tired of the flip cover I had been using. Very nice. Not pretty, but feels good in the hand and very robust. Why oh why does it have to have the silly "air cushion technology" text at the bottom, though?

Got the Spigen case and it looks great on my white Xperia™ Z3+ Dual.☺

kingofging said:
What he said!
How does it fare with scratches etc?
Click to expand...
Click to collapse
I haven't been using any case or anything with my Z3+ since I bought it. The back is as extremely polished as the front, so it is super slippery in almost any surface where you'd put it - seriously, very slippery; it's like my Z2 wasn't half as polished. As a result, mine already shows a few very minor scratches from the various surfaces I've parked it on, and a very light one over the camera glass. It seems that the back is not as resistant as the front, though - the same week that I bought it, I accidentaly dropped my Z3+ on the rough floor of an old church (it was during a marriage ceremony, very silent atmosphere at the moment and just imagine how I wanted to scream and swear all sorts of bad words when that happened!); "fortunately" it landed on its back, but it made a very noticeable scratch Because of all of this, I just bought a silicone case. I hate cases because they fundamentally alter the immediate look of the device, but unfortunately it gets too much exposed without one.

Suggest me any premium one plus 3T back case [INDIA]

Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks

i_heart_3t said:
Hi, i am looking for some premium back cover for my one plus 3t. My budget is around 700-800. Can extend the expense for greater quality.
I have seen some on Amazon.in but can trust without the actual snapshots.. So, if you have brought any please also do attach snaps.
thanks
Click to expand...
Click to collapse
Otterbox

Spigen OnePlus 3T Case Rugged Armor : https://paytm.com/shop/p/spigen-one...k-k03cs20615-MOBSPIGEN-ONEPLSPIG245649E6B52A8
you'll get a 20% cashback on paytm. It's available on all other websites without the cashback.

vijaynelaturi said:
Otterbox
Click to expand...
Click to collapse
loved that one highlighted at official oneplus site but way to exp

here are some recommendations,,
#2, #9, #10
http://www.myandroidphone.in/2017/01/oneplus-3t-back-cover-cases.html

I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.

Spigen's Rugged Armor case won't protect anything, it's a visual only improvement, there isn't even any padding on the corners.
Otterbox is the best protection you can get but it is a lot bulkier in your pocket.
Look on YouTube for drop tests with otterbox cases, there are people dropping them from the third floor of buildings with only light scratches.

IF u want transparent, nothing better than this exsits quality and looks wise
http://www.amazon.in/OnePlus-Spigen-Hybrid-Crystal-K03CS20616/dp/B01H3PF2AM
u get it cheaper here
https://paytm.com/shop/p/spigen-one...ar-k03cs20616-MOBSPIGEN-ONEPLSPIG2456446710B2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
available in 524 on Paytm.
Amazon it's 900
Sent from my Redmi Note 3 using Tapatalk

I am using the Original Glass screen protector along with the Original case as shown in the video here:- https://www.youtube.com/watch?v=ks4Zn9Pe-ls
Let me know how you like it!

try the spigen armor with carbon fiber it's matte back and has a pretty sleek design found one on ebay for 15$ but the one downside to the case is that it has these bumps under the hardware button covers which constantly puts slight pressure on the power button which caused a problem on older samsung devices with turning off on its own later down the road. to fix this problem I just took a file and pliers and removed the bumps that were under the hardware button covers. this can be done on all cases to prevent any chance of the phone have a problem with turning off on its own later

I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these

samsexy98 said:
I am using this one:
http://www.amazon.in/TUDIA-Bumper-Absorption-OnePlus-TD-TPU3732/dp/B01LDIG9DY
Its for Rs.799/-
Pretty good and an edge over Spigen is that Tudia has big cut-outs for charging, speaker and headphone. So no issues to plug anything in these
Click to expand...
Click to collapse
i am using spigen myself, the cut outs r perfect, No issue whatsoever in plugging anything!

ONEPLUS official Ebony back case.
no bulk and looks amazing.
not much protection though, just for the looks.

NirajGajjar said:
I have bought
OnePlus 3 Translucent Gray Case ₹499 from oneplus store, really Good one, doesn't bulk up handset.
Also bought
Case U® Smoke Black Transparent TPU case
Both are good. Feel nice, Don't look cheap.
Between both I like official Oneplus back cover more.
Edit:
Both work fine with case u tempered glass screen protector if applied properly.
Click to expand...
Click to collapse
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?

grasshop3r said:
Hi, that OP translucent gray soft case looks good. Does it provide any protection? Or just for the grip and looks?
Click to expand...
Click to collapse
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.

NirajGajjar said:
Yes, I'm still using the same case. Accidentally dropped phone 2 times (2-3 feet high drop) and its safe.
BTW Tampered glass came off after a few days and I don't feel need of it anymore, just back cover is enough.
Do not waste money on glass, if you still feel that screen guard is needed go for screen protectors, not for tampered glass.
Click to expand...
Click to collapse
Thanks! I'll get just that one. I anyway have some oneplus store credits
I'll keep the company provided, pre-applied screen protector ON till it lasts. Then I'll keep the screen bare. Just the back cover will be good.
This is my first OP device and will be my first purchase through the OP India store.

Try the cruzerlite bugdroid covers they are good