I have been trying to use the KFU to root, but at the end of the command prompt, it says Waiting on Device. I have left it like this for 15 minutes to no avail and I can interact fully with the kindle. I'm running 6.3.3 on the kindle and windows 8 on my laptop. I have tried installing the drivers but no matter what I do, the kindle still shows up as Kindle Fire in device manager, although if I click the drop down arrow, it says Android Composite ADB Interface. When I load up KFU, it registers that the device is connected and says ADB Status: Connected, but Boot Status is unknown. I don't know what to try, can anyone help?
SgtStringCheese said:
I have been trying to use the KFU to root, but at the end of the command prompt, it says Waiting on Device. I have left it like this for 15 minutes to no avail and I can interact fully with the kindle. I'm running 6.3.3 on the kindle and windows 8 on my laptop. I have tried installing the drivers but no matter what I do, the kindle still shows up as Kindle Fire in device manager, although if I click the drop down arrow, it says Android Composite ADB Interface. When I load up KFU, it registers that the device is connected and says ADB Status: Connected, but Boot Status is unknown. I don't know what to try, can anyone help?
Click to expand...
Click to collapse
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
sd_shadow said:
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
Click to expand...
Click to collapse
Ohhh thanks!
sd_shadow said:
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
Click to expand...
Click to collapse
I got my kindle rooted with a custom recovery, but now I'm stuck in a boot loop, can you help
SgtStringCheese said:
I got my kindle rooted with a custom recovery, but now I'm stuck in a boot loop, can you help
Click to expand...
Click to collapse
Can you get to TWRP?
What do you want to do? Install a custom rom?
sd_shadow said:
Can you get to TWRP?
What do you want to do? Install a custom rom?
Click to expand...
Click to collapse
Yes I can get to twrp, but I cannot boot into the OS. If I boot up and select boot normally, it goes to the orange kindle fire logo then the screen cuts off. I'd like install CM 10 which I have downloaded on my laptop.
SgtStringCheese said:
Yes I can get to twrp, but I cannot boot into the OS. If I boot up and select boot normally, it goes to the orange kindle fire logo then the screen cuts off. I'd like install CM 10 which I have downloaded on my laptop.
Click to expand...
Click to collapse
Just use mount sd card option in twrp.
mount>check sd card >mount usb
should get a popup in windows>click view files
copy CM10 and Gapps to sd card
unmount usb in TWRP
wipe>factory reset
install Cm10 and gapps
sd_shadow said:
Just use mount sd card option in twrp.
mount>check sd card >mount usb
should get a popup in windows>click view files
copy CM10 and Gapps to sd card
unmount usb in TWRP
wipe>factory reset
install Cm10 and gapps
Click to expand...
Click to collapse
You're a lifesaver dude! I'm in cyanogen mod now
SgtStringCheese said:
You're a lifesaver dude! I'm in cyanogen mod now
Click to expand...
Click to collapse
Great, If you want to upgrade to CM11 you will have to upgrade twrp first.
http://forum.xda-developers.com/kin...indle-fire-flashable-recoveries-twrp-t2811253
Related
Hi.
When I root my Kindle fire , using youtube tutorials I get to a TWRP screen on my Kindle.
Not as shown as in the videos..
Anyone knows why and how to fix this?
When I run the KFU and press 2, it loads everything and success and then it says please wait....
I look on my Kindle and its on the TWRP..
Select reboot then system if prompted...
Connect your KF to computer and run Kindle Fire Utility. Then try to change bootmode to 4000.
Or turn off device, connect to computer, set command in Kindle Fire Utility ( change bootmode to 4000) and
turn on device. It should works.
edgdob said:
Connect your KF to computer and run Kindle Fire Utility. Then try to change bootmode to 4000.
Or turn off device, connect to computer, set command in Kindle Fire Utility ( change bootmode to 4000) and
turn on device. It should works.
Click to expand...
Click to collapse
It is already on Online and 4000. o.o
How can I know if my Kindle is rooted?
The easiest and least technical way would be to side-load a "for root only" apk to see if it works. (hint: you won't find one at the Amazon app store)
same here
soupmagnet said:
The easiest and least technical way would be to side-load a "for root only" apk to see if it works. (hint: you won't find one at the Amazon app store)
Click to expand...
Click to collapse
I'm have the same problem as original poster and they updated the video instructions to say:
***NOTICE
there seems to be an issue with the kindle fire utility not installing the superuser app which will finish giving you root. So what you can do to remedy this is once you have the twrp recovery, you can flash this stock rooted version of 6.3 (THIS WILL WIPE ALL UR DATA)
http://forum.xda-developers.com/showthread.php?t=1569298
OR you can just download this superuser.apk, and sideload it onto your kindle fire (I have a video for sideloading if you dont know how, your data will NOT be wiped)
http://uploading.com/files/2f495fa7/Superuser.apk/
Click to expand...
Click to collapse
Is the "superuser.apk" the "for root only"apk your referring too???? What's a "for root only"apk or where can I find info about it?????
Thanks,
Marty
Have you had any luck in getting it to work? Im having the same issue unfortunately
Hi everyone, I tried to root the kindle fire 1st gen and accidentally wiped the sdcard...So now I'm stuck in TWRP with no rom or backup. I tried to transfer files from pc to kindle, but the computer does not recognize the kindle anymore. Please give me some suggestions, thank you!
PS: My system is win 8 x64, installed KFU and android SDK. KFU shows online when the kindle fire logo shows up (it stucks there) but the boot mode is unknown. Also I can't use adb while the device is in recovery (trwp) mode.
tomhrxbfg said:
Hi everyone, I tried to root the kindle fire 1st gen and accidentally wiped the sdcard...So now I'm stuck in TWRP with no rom or backup. I tried to transfer files from pc to kindle, but the computer does not recognize the kindle anymore. Please give me some suggestions, thank you!
PS: My system is win 8 x64, installed KFU and android SDK. KFU shows online when the kindle fire logo shows up (it stucks there) but the boot mode is unknown. Also I can't use adb while the device is in recovery (trwp) mode.
Click to expand...
Click to collapse
Was it only the sdcard that you wiped or had you also wiped system?
soupmagnet said:
Was it only the sdcard that you wiped or had you also wiped system?
Click to expand...
Click to collapse
I think it's the whole system...not too sure about that though. Now the problem is I can't connect to the pc while in twrp recovery (adb won't work), and if I booted normally, the adb will work.
Tom
First of all don't worry as long as your TWRP is working.
I did the same thing while changing one rom to another, accidentally wiped everything.
What you need to to do is
1. Download KF rom. I like twa's rom and gapps zip on your computer.
2. Connect your Kindle fire to your windows desktop.
3. Start the KF, go into TWRP recovery.
4. Click mount option. Now you should see KF as usb drive in your windows desktop.
5. Paste both rom and gapps into backup folder, which is inside TWRP folder.
6. Eject the KF usb drive successfully and THEN click unmount option on the Kindle fire display.
7. Now in TWRP screen, go to install option, go to the copied Rom and install it, gapps- install it and clean catches and dalvinick catches and reboot the system.
8. This should start the KF with new rom. Now through file manager app, go back to backup folder in TWRP and move to other location, if you want.
Sent from my MB860 using xda app-developers app
marathamola said:
Tom
First of all don't worry as long as your TWRP is working.
I did the same thing while changing one rom to another, accidentally wiped everything.
What you need to to do is
1. Download KF rom. I like twa's rom and gapps zip on your computer.
2. Connect your Kindle fire to your windows desktop.
3. Start the KF, go into TWRP recovery.
4. Click mount option. Now you should see KF as usb drive in your windows desktop.
5. Paste both rom and gapps into backup folder, which is inside TWRP folder.
6. Eject the KF usb drive successfully and THEN click unmount option on the Kindle fire display.
7. Now in TWRP screen, go to install option, go to the copied Rom and install it, gapps- install it and clean catches and dalvinick catches and reboot the system.
8. This should start the KF with new rom. Now through file manager app, go back to backup folder in TWRP and move to other location, if you want.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Hi, thank you for the suggestion. however, I tried this method but the computer does not recognize kindle fire as a usb. Actually kindle fire is gone from the computer and adb not working. Do you know why it's like this? Thank you for your time.
That is strange.
Can you try connecting it to another computer? May be it might work.
Sent from my MB860 using xda app-developers app
marathamola said:
That is strange.
Can you try connecting it to another computer? May be it might work.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Hmm...I was trying to use soupkit today and during the creation of liveusb I somehow mounted kindle fire as usb again and the pc recognizes it! OMG this is the best moment of my day! Thank you for everything you guys contributed!
tomhrxbfg said:
Hmm...I was trying to use soupkit today and during the creation of liveusb I somehow mounted kindle fire as usb again and the pc recognizes it! OMG this is the best moment of my day! Thank you for everything you guys contributed!
Click to expand...
Click to collapse
can you tell me how you did it? im stuck on twrp as well and i cant get my computer to recognize the kindle
as a storage device
jjhyphy said:
can you tell me how you did it? im stuck on twrp as well and i cant get my computer to recognize the kindle
as a storage device
Click to expand...
Click to collapse
Try
http://forum.xda-developers.com/showthread.php?t=2459498
This worked for me - key was that I needed to use the usb drivers in his signature. This allowed me to atb over anyway - still can't see it on computer as a usb device.
I'm facing a similar issue but my device is Moto G5s Plus.
The problem I'm facing is that I accidently wiped out the mobile's system completely, and now it does not even have an "internal storage" partition at all (since it shows 0 MB). Hence, I cannot even transfer any files to my mobile because my computer does show the phone detected but no "internal storage exists".
Please help me out..
Kindle Tate (PVT O8) Model
hi,
My Kindle Data and All Partitions Accidentally Wipe after Flashing, No Partition Show, No Internal Storage Appear And Stuck on Kindle Fire Blue Logo, TWRP V.2.7.8.0 Downgrade to TWRP V.2.6.3.1. My Kindle go to ADB Side Load and on Fastboot.
But Not Connecting in PC Already Installed SDK and ADB Drivers. Show Connected but No INTERNAL or SD CARD STORAGE FOUND in My Computer or Laptop. I request you please help me.
Not Confirm what is model. but show Kindle tate & pvt 08
OS Running Win 7 & Linux mint and Ubuntu
After some issues try to self flashing & wiping all data.
i also wiped everything I cant flash with twrp ill try downloading the kindle fire rom thank you
My kindle has an otterX (from here: http://forum.xda-developers.com/showthread.php?t=2671619 ) and i just get the Kindle Fire logo and press to open bootmenu. I cannot boot into revoery for some reason and upon clicking continue boot the kindle fire just shuts off. i can't figure out what i need to do to get it unstuck from this situation or if i can throw it into fastboot. when sitting in the bootmenu the kindle shows up in Device Manager as a Kindle Fire (below when Kindle Fire is clicked) and then Android composite ADB Interface. Would rekindle work? i seriously don't want this kindle to be bricked/broken.
pheonix1212 said:
My kindle has an otterX (from here: http://forum.xda-developers.com/showthread.php?t=2671619 ) and i just get the Kindle Fire logo and press to open bootmenu. I cannot boot into revoery for some reason and upon clicking continue boot the kindle fire just shuts off. i can't figure out what i need to do to get it unstuck from this situation or if i can throw it into fastboot. when sitting in the bootmenu the kindle shows up in Device Manager as a Kindle Fire (below when Kindle Fire is clicked) and then Android composite ADB Interface. Would rekindle work? i seriously don't want this kindle to be bricked/broken.
Click to expand...
Click to collapse
When that has happened to me it was from a incompatible recovery or corrupt recovery.
when you see the bootloader it is in Fastboot mode.
just reflash a recovery like otterx-twrp-2.7.1.0-recovery.img
in command prompt
Code:
fastboot flash recovery otterx-twrp-2.7.1.0-recovery.img
fastboot reboot
still confused...
i am getting an error saying it cannot open the file.
did you watch my video? [YouTube] OtterX ROM/TWRP/Bootloader [2014-05-08]
Sent from my Amazon OtterX using Tapatalk
i've gotten TWRP to install. i couldn't get the otterX one i needed to install so i installed one i downloaded else where. i was originally wanting KitKat on here but don't want that fiasco to happen again. unfortunately now i cannot boot normally. just gets to the Kindle Fire Logo and restarts.
Is the bootloader set to amazon or otters partitions?
Sent from my Amazon OtterX using Tapatalk
i think it's on amazon. however upon reading some articles of what i was doing the version i have now isn't able to haandle what im doing so i have to update twrp.
You need to pick a direction otterx, or other custom ROM, or stock
Sent from my Amazon OtterX using Tapatalk
using the updated version of twrp thats compatible with installing KitKat will that be possible to leave it amazon or would i need to use otterX for CM11 KitKat?
You can install whatever you want, just need to tell me so I can give correct directions.
You need to check Bootloader settings, advanced does it say amazon or or otterx partitions
Sent from my Amazon OtterX using Tapatalk
i don't see a way to check that. im using the fff-u-boot v1.5 bootloader i believe (not to sure, pretty new to android and rooting) (with openrecovery-twrp-2.2.2.1-blaze (need to update downloaded 2.8.0.2-blaze already) sorry for my being a noob with this. your helping a ton though :highfive: .
1.5 FFF is not otterx just otter
flash openrecovery-twrp-2.8.0.2-blaze.img
Code:
fastboot flash recovery openrecovery-twrp-2.8.0.2-blaze.img
fastboot reboot
in TWRP Wipe/factory reset
install cm-11-20140916-SNAPSHOT-M10-otter.zip
and PA MINI MODULAR PACKAGE GApps
in TWRP
im having an issue getting into fastboot mode. i've tried restarting my kindle and running fastboot commands. the command to install the updated twrp is still saying waiting for device.
When you see Bootloader it's in fastboot mode
Could be a drivers issue.
When I flash, I usually start with connecting USB cable, then power off kindle, run commands, reboot kindle
Sent from my Amazon OtterX using Tapatalk
The Fastboot mode finally loaded. had to pull the device manager and begin process of pointing out driver and shut off the kindle and as it hit the bootloader point i had to install driver. i believe my issues have been resolved. It booted up KitKat just now. THANK YOU!!!!!!!!!! :victory: :highfive:
Do you have backup?
mudassirrashid said:
Do you have backup?
Click to expand...
Click to collapse
Having a backup has nothing to do with the problem, that is now fixed
Haha good for you... Have nice day
Hi, about a month ago, I installed the GO Launcher EX on my stock 6.3.3 Kindle Fire 1st Gen. The same day, I decided to make the Launcher my default Launcher. Later, it began to start running slowly so I hard reset it. It now does not boot up and is stuck perpetually on the loading logo.
Didn't install twrp?
If not is logo animated/changing or not.
If animated may need a fastboot cable
Sent from my DROIDX using Tapatalk
I do now have a fastboot cable. I didn't install anything and the logo is animated. What do you suggest?
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Then you can wipe data in twrp or reinstall stock.
Sent from my Amazon OtterX using Tapatalk
sd_shadow said:
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Then you can wipe data in twrp or reinstall stock.
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
I've tried to find my Kindle in KFU and it shows Offline at all times. Does this affect anything?
Aareon said:
I've tried to find my Kindle in KFU and it shows Offline at all times. Does this affect anything?
Click to expand...
Click to collapse
Kindle Fire Utility does not Root or Install TWRP/FFF with latest update, only thing KFU is good for now is Installing Drivers and Google Apps
What step are you on, what have you done?
sd_shadow said:
Kindle Fire Utility does not Root or Install TWRP/FFF with latest update, only thing KFU is good for now is Installing Drivers and Google Apps
What step are you on, what have you done?
Click to expand...
Click to collapse
I am stuck on the same step. Not sure the number, but I rooted, installed go launcher, and was going to install twrp with a utility (I forget which one because I have tried to use so many of them to get out of the mess I'm in) and when it rebooted my device into fastboot/recovery, it stuck on the splash screen that says kindle fire, the 'kindle' text is white and the 'fire' text is orange. My device manager says Android Phone > Android ADB Interface. From what I have read and understand, I need to have the driver showing Android Phone > Android ADB Composite Interface. I can't seem to find the appropriate driver anywhere.
The worst part about this is that I started this for my mother in law so she could have a fully functioning tablet, and now it's a warm fancy paperweight.
I appreciate any help, or just point me to the correct thread. Can't seem to find anything anywhere.
chaubach said:
rebooted my device into fastboot/recovery, it stuck on the splash screen that says kindle fire, the 'kindle' text is white and the 'fire' text is orange. My device manager says Android Phone > Android ADB Interface.
Click to expand...
Click to collapse
No when in Fastboot it should just say Android ADB Interface
follow my Using Factory/Fastboot Cable to Flash FFF Bootloader and TWRP Recovery
You don't need the fastboot cable, just start with step "Download ADB/Fastboot.exe Files from"
So I am in a bind.
I had TWRP and N2K type utiltiy that was working. i tried to wipe and reset and here is where i am now.
so i have a first generation kindle fire. i load TWRP and get to recovery boot which brings me to team win. TWRP is version 2.6.3.0.
I do not have access to the kindle drivers. so the only thing i can do is access it though mount.
so i mounted the device and added the most recent update (changing it to update.zip) but its not working. it still starts with the blue kindle fire setting and only in TWRP. i cant recover it to normal. when i go into the device i only have 2 folder. TWRP and .android_secure.
i just want to know how to get back to factory settings. I tried using a kindle boot device but it wont recognized the kindle because it is only recognizing it as a usb drive.
any ideas? not sure what other information you need to help. please help - thanks!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
jchimerust said:
So I am in a bind.
I had TWRP and N2K type utiltiy that was working. i tried to wipe and reset and here is where i am now.
so i have a first generation kindle fire. i load TWRP and get to recovery boot which brings me to team win. TWRP is version 2.6.3.0.
I do not have access to the kindle drivers. so the only thing i can do is access it though mount.
so i mounted the device and added the most recent update (changing it to update.zip) but its not working. it still starts with the blue kindle fire setting and only in TWRP. i cant recover it to normal. when i go into the device i only have 2 folder. TWRP and .android_secure.
i just want to know how to get back to factory settings. I tried using a kindle boot device but it wont recognized the kindle because it is only recognizing it as a usb drive.
any ideas? not sure what other information you need to help. please help - thanks!
Click to expand...
Click to collapse
Stock Kindle Fire firmware will not install with twrp higher than 2.2.2.1
Install twrp. 2.2.2.1 Zip from
Kindle Fire Flashable Recoveries TWRP/COTR/CWM[2014]
Reboot, try update. Zip again
Or my prerooted 6.3.3
[2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
Note: If your PC is running Windows 8.1
Drivers may not install correctly
Watch How to disable driver signature enforcement - Windows 8.1
Sent from my XT907 using Tapatalk