Hi, about a month ago, I installed the GO Launcher EX on my stock 6.3.3 Kindle Fire 1st Gen. The same day, I decided to make the Launcher my default Launcher. Later, it began to start running slowly so I hard reset it. It now does not boot up and is stuck perpetually on the loading logo.
Didn't install twrp?
If not is logo animated/changing or not.
If animated may need a fastboot cable
Sent from my DROIDX using Tapatalk
I do now have a fastboot cable. I didn't install anything and the logo is animated. What do you suggest?
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Then you can wipe data in twrp or reinstall stock.
Sent from my Amazon OtterX using Tapatalk
sd_shadow said:
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Then you can wipe data in twrp or reinstall stock.
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
I've tried to find my Kindle in KFU and it shows Offline at all times. Does this affect anything?
Aareon said:
I've tried to find my Kindle in KFU and it shows Offline at all times. Does this affect anything?
Click to expand...
Click to collapse
Kindle Fire Utility does not Root or Install TWRP/FFF with latest update, only thing KFU is good for now is Installing Drivers and Google Apps
What step are you on, what have you done?
sd_shadow said:
Kindle Fire Utility does not Root or Install TWRP/FFF with latest update, only thing KFU is good for now is Installing Drivers and Google Apps
What step are you on, what have you done?
Click to expand...
Click to collapse
I am stuck on the same step. Not sure the number, but I rooted, installed go launcher, and was going to install twrp with a utility (I forget which one because I have tried to use so many of them to get out of the mess I'm in) and when it rebooted my device into fastboot/recovery, it stuck on the splash screen that says kindle fire, the 'kindle' text is white and the 'fire' text is orange. My device manager says Android Phone > Android ADB Interface. From what I have read and understand, I need to have the driver showing Android Phone > Android ADB Composite Interface. I can't seem to find the appropriate driver anywhere.
The worst part about this is that I started this for my mother in law so she could have a fully functioning tablet, and now it's a warm fancy paperweight.
I appreciate any help, or just point me to the correct thread. Can't seem to find anything anywhere.
chaubach said:
rebooted my device into fastboot/recovery, it stuck on the splash screen that says kindle fire, the 'kindle' text is white and the 'fire' text is orange. My device manager says Android Phone > Android ADB Interface.
Click to expand...
Click to collapse
No when in Fastboot it should just say Android ADB Interface
follow my Using Factory/Fastboot Cable to Flash FFF Bootloader and TWRP Recovery
You don't need the fastboot cable, just start with step "Download ADB/Fastboot.exe Files from"
Related
Hello, I have a rooted Kindle Fire (with bootloader) and tried to return it to original Amazon Stock OS.
I tried the steps specified on this page androidcowboy.com/2013/06/how-to-return-kindle-fire-hd-to-stock/
After this steps:
"Navigate to the folder where you unzipped the Kindle Fire SRT Tool and double-click on “SR Tool” file. Choose option 1 for “Restore-Factory Rooted with Superuser.apk”. Be patient as it’s very important. The file transfer can take up to 5 minute with no progress notification. If you interrupt the process in any way then you will BRICK your device. After the transfer is done then choose option 4 to “Erase cache and userdata”. Once it’s finished then choose option 6 to reboot."
It rebooted and seemed to be stuck at the white and orange Kindle Fire logo screen. I can turn it off and on by holding the power button, but my computer cannot detect it as a portable device or ADB. But I can enter fastboot mode by plugging the USB while it is turned off, so I don't think it's hard bricked.. I hope so.
Any thing wrong that I have done? Sorry I'm a noob when it comes to this. Help please?
Btw, my Kindle Version 8.4.1
Is it boot looping on the animated kindle logo or the static image one? Cause either way I'm guessing something went wrong with the flash, you should probably reflash the boot and system images, try using kindle fire first aid if the SRT doesn't work, I believe it has a stock rooted image flashing option like SRT. BTW don't confuse boot with bootloader, boot is where the kernel is stored. Just pointing this out because if you don't need to flash the boot loader then u shouldn't, if it corrupts you have a hard brick.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Is it boot looping on the animated kindle logo or the static image one? Cause either way I'm guessing something went wrong with the flash, you should probably reflash the boot and system images, try using kindle fire first aid if the SRT doesn't work, I believe it has a stock rooted image flashing option like SRT. BTW don't confuse boot with bootloader, boot is where the kernel is stored. Just pointing this out because if you don't need to flash the boot loader then u shouldn't, if it corrupts you have a hard brick.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I do have KFFA, which option should I choose? And mine is stuck on a static image one.
Weird sounds like it doesn't want to even try to load the os, maybe some things wrong with the kernel, anyways I haven't ever used kffa, but there should be an option somewhere to restore system image. You will first need to get the device into fastboot mode, just open a command prompt and CD into the kffa directory, I should have a fastboot command, and run this: fastboot.exe -i 0x1949 getvar product
Then plug your kindle in with the power off. If for some reason it doesn't work, which it should because you seem to have flashed something from fastboot before, then u will just have to update a driver before it disconnects.
Edit: OK fixed sorry for the thread mix up.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Same problem
I have a KFHD 8.9 with the same problem as the OP. It's stuck on the static (orange) Kindle Fire logo. I have working drivers and I am able to get it into fastboot using "fastboot.exe -i 0x1949 getvar product". The problem is, I don't know any of the history of how it got this way. I have repaired a lot of Generation 1 KF's and I thought I would get started on the Gen 2's so I bought this on eBay this way. I didn't realize how much more risky it was to work on the Gen 2. I also have KFFA working but I can't figure out how to get the stock image onto the KF so I can flash it back to stock. When I go into fastboot mode and use KFFA to reboot to normal more it just stops on the static Kindle Fire logo. Also, I can't get ADB to work at all. Any help would be greatly appreciated.
There's an option in kffa to restore the system partition, should be a fairly obvious choice, if you can't find it try the kfhd system restore tool
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
There's an option in kffa to restore the system partition, should be a fairly obvious choice, if you can't find it try the kfhd system restore tool
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Well I tried KFFA Option 7 - Completly Restore the KFHD 8.9 8.1.4 (Fastboot) but it didn't work. There is a problem in RunMe.bat with the wget command when trying to download the .img files from dropbox:
Connecting to dl.dropboxusercontent.com|174.129.21.126|:443... connected.
ERROR: cannot verify dl.dropboxusercontent.com's certificate, issued by `/C=US/O
=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance CA-3':
Unable to locally verify the issuer's authority.
To connect to dl.dropboxusercontent.com insecurely, use `--no-check-certificate'
Unable to establish SSL connection.
So then, I Downloaded the KFHD_SRT tool and managed to restore the system partition but it still would not boot. Then I saw down at the bottom of the instruction page that to downgrade to 8.1.4 you also need to restore the boot and recovery partitions. After I did that -- PRESTO! my KFHD 8.9 booted up and is now working.
THANK YOU SO VERY MUCH FOR THE HELP!!!!! I will be sure to click the "THANKS" button.
Anchorman42 said:
I have a KFHD 8.9 with the same problem as the OP. It's stuck on the static (orange) Kindle Fire logo. I have working drivers and I am able to get it into fastboot using "fastboot.exe -i 0x1949 getvar product". The problem is, I don't know any of the history of how it got this way. I have repaired a lot of Generation 1 KF's and I thought I would get started on the Gen 2's so I bought this on eBay this way. I didn't realize how much more risky it was to work on the Gen 2. I also have KFFA working but I can't figure out how to get the stock image onto the KF so I can flash it back to stock. When I go into fastboot mode and use KFFA to reboot to normal more it just stops on the static Kindle Fire logo. Also, I can't get ADB to work at all. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hey, I got same problem, after I install a bootloader for my KFHD 8.9, the original Kindle OS was unable to boot up, I got 8.4.6 when I recived my KFHD, Is the problem of OS ?
Sorry, but after re-reading my post I realized that I probably gave bad instructions. Mods please delete this post...
Hi folks. I've been studying the forums for a few days now and can't resolve my issue. Hoping you will tolerate a noob dilemna.
I have a KF 8.9 HD running CM 10.1 and play store with no issues. Runs flawlessly. In my attempt to try out the CM 10.2 I wiped out the internal memory, cache etc.
I'm using Windows 8.1 to communicate with the KF.
I can only see the Kindle and use the ADB commands if I boot into TWRP. It reports the number and recovery when I run ADB devices in an admin command window. I'm unable to use the ADB commands when the KF is running the 10.1 OS desktop. Windows device manager reports it as MTB USB Device instead of the ADB Composite Device I get when it's running in TWRP. No matter how much tinkering and uninstalling KF drivers, I can't get it to see the KF.
I've also downloaded KF FirstAide.I get all of the menu options but it hangs whenever I try any options. For example, it hangs after reporting daemon started successfully when I try to use the safe diagnostics. I can't get it to communicate with the KF.
I'm in need of restoring this KF 8.9 HD to Amazon stock OS. I've ordered a new one and will be passing this one on to someone that's looking for the Amazon stock system. Otherwise I'd leave it as it since CM 10.1 is running.
Really appreciate the help you can give me.
You have to enable adb in cm 10.1, click on the build number about 10 times under "about tablet" in settings, that should enable the developer menu in settings so you can enable adb.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You have to enable adb in cm 10.1, click on the build number about 10 times under "about tablet" in settings, that should enable the developer menu in settings so you can enable adb.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks Stunts. That should get me closer to figuring this out. The {} Developer Options are now visible on the KF. Root access is set to Apps and ADB. Uninstalled KF Win 8.1 device drivers again and rebooted both KF and computer. Still doesn't see it in Win 8.1 when I use ADB Devices (doesn't report any devices).
The Windows driver is still reporting MTB USB Device. When I try to update the driver using androide_usb.inf windows reports there is no compatible software driver in that folder.
I'll keep messing with the Developer Options on the KF. Any other suggestions?
Stupid question but did you check the box to enable adb? I didn't see that said you did only something else so I thought I'd ask. Also the MTP device is desperate so you shouldn't have to update it with the adb drivers, it should be a desperate device usually under its own android debugging category if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Stupid question but did you check the box to enable adb? I didn't see that said you did only something else so I thought I'd ask. Also the MTP device is desperate so you shouldn't have to update it with the adb drivers, it should be a desperate device usually under its own android debugging category if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I gave up on getting it to work in Windows 8.1. There must be something about the way it handles the drivers that prevents the device being seen when CM10.1 is running. Very frustrating. I must have tried 100 different variations but I can only get it to see the KF in Portable Device Player, not the Android Composite Device it sees when I'm running in TWRP mode.
I ended up using my daughter's netbook which is running Windows 7. Installed Java Developers Tools, KF First Aide. I can now see finally both the device as the portable media player and the Android Composite Device. Yeah!
One last problem to overcome. I want to wipe the KF clean and install the stock Amazon system. KFAide now communicates with the device in CM10.1. I was able to do a backup but it still hangs when I try to restore the stock system.
Is there a place a can get the stock image files for KF 8.9 HD? 8.1.3 or 8.1.4 should be fine (I don't remember which I was running before installing CM10.1). Ideally I want to transfer the stock images to the SDCard directory and then use TWRP to reinstall. Sound reasonable?
If you want full unrooted stock just download the latest update from Amazon's website for your device, put it on the kindle's sdcard and change the extension to .zip, and wipe the system, and do a factory reset then flash the amazon update, it should remove twrp and 2nd boot loader as well
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
If you want full unrooted stock just download the latest update from Amazon's website for your device, put it on the kindle's sdcard and change the extension to .zip, and wipe the system, and do a factory reset then flash the amazon update, it should remove twrp and 2nd boot loader as well
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks again Stunt. Want to make sure I do this correctly.
Do I just check off wipe system in twrp or other items like internal memory etc. I'm thinking just system.
Is the factory reset from within twrp?
Finally, do i flash while in fastboot mode?
Sorry for all the questions. Appreciate the help
When you hit wipe I believe there is a factory reset button, and after that you would do another wipe and check system, then install the amazon update zip file from within twrp, not fastboot.
Sent from my Amazon Kindle Fire HD using Tapatalk
Ruacasa said:
Thanks again Stunt. Want to make sure I do this correctly.
Do I just check off wipe system in twrp or other items like internal memory etc. I'm thinking just system.
Is the factory reset from within twrp?
Finally, do i flash while in fastboot mode?
Sorry for all the questions. Appreciate the help
Click to expand...
Click to collapse
How to Disable Driver Signature Enforcement to allow installation of Windows 7 Printer Drivers on Windows 8 http://www.fotoclubinc.com/blog/how...on-of-windows-7-printer-drivers-on-windows-8/
Crap! Now it hangs on the Kindlefire screen (orange color not the blue rooted color).
I can use KDFirstAide to get it back in fastboot mode. I tried the various options to restore su, erase cache and user data etc, but nothing. It continues to hang at the KindleFire screen
Any suggestion? Are there any Fastboot commands I can use to restore and use twrp again?
You need to run "fastboot -i 0x1949 getvar product" with the kindle unplugged and off then plug it in when it says waiting for device, that should put it into fastboot so kffa can restore the system.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You need to run "fastboot -i 0x1949 getvar product" with the kindle unplugged and off then plug it in when it says waiting for device, that should put it into fastboot so kffa can restore the system.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Tired it and ran KFF. KFF prompts me that the Kindle Must be Powered on to the Desktop to do a restore of the system. Can't get to the desktop at this point. If I select no at the desktop prompt it starts the deamon and hangs at that point. Probably because it's trying to use ADB which is not active in Fastboot mode.
I was successful in using KFF to do a backup restore, but it is still hanging on the KindleFire screen.
The only thing I can do right now is get to Fastboot mode using the KFRecovery utility and Enabling Fastboot to get to Fastboot mode.
Something didn't restore right then, have you tried kindle fire system restore tool? http://forum.xda-developers.com/showthread.php?t=2011126
Is fastboot mode working as far as you know from running the command I mentioned? It should report something back with jem in it .
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Something didn't restore right then, have you tried kindle fire system restore tool? http://forum.xda-developers.com/showthread.php?t=2011126
Is fastboot mode working as far as you know from running the command I mentioned? It should report something back with jem in it .
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Fastboot is still working. I did run that command you posted: fastboot -i 0x1949 getvar product. It reported Prod: Jem-PVT-Prod-04.
I have tried the Recovery tool you linked to but it hangs when I try to restore the system (using any of the options)
Update: I was able to get KFFirstAide to complete it's recover using 8.1.2 option. I got a full red screen then it booted to the Fastboot Mode Screen. I feel I'm getting closer. I held the power button for 20 seconds, then release for 5 and power up again. It's still going into Fastboot Mode. Any advice?
Try restoring the system one more time, if that doesn't work you might have to reflash the boot loader. You can try "fastboot -i 0x1949 reboot" or "fastboot -i 0x1949 OEM idme bootmode 1" possibly followed by the first command. I have my doubts that command will work though and I'm not positive if system is 1 or not because the numbers used to be different on the original all and I'm not too familiar with the numbers on the hd models, but I think its 1.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Try restoring the system one more time, if that doesn't work you might have to reflash the boot loader. You can try "fastboot -i 0x1949 reboot" or "fastboot -i 0x1949 OEM idme bootmode 1" possibly followed by the first command. I have my doubts that command will work though and I'm not positive if system is 1 or not because the numbers used to be different on the original all and I'm not too familiar with the numbers on the hd models, but I think its 1.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for sticking with me Stunts. I tried reinstalling it already. Tried both variations of the fastboot commands you listed. Is it possible the second one is missing an argument? When I enter it by itself it comes back as listing all of the fastboot options (I usually get that when I type something wrong).
So it sounds like I just need to get out of the Fastboot Mode. It always shows a full red screen before entering Fastboot Mode
Odd, I suggest reflashing the boot loader then, download the boot loader for your device here: http://forum.xda-developers.com/showthread.php?t=2128175
Its the 8.1.4 boot loader listed, make sure you check that the md5sum matches what's on that page or you could hard brick it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Odd, I suggest reflashing the boot loader then, download the boot loader for your device here: http://forum.xda-developers.com/showthread.php?t=2128175
Its the 8.1.4 boot loader listed, make sure you check that the md5sum matches what's on that page or you could hard brick it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Downloaded and installed new bootloader. No errors but no improvement. Cycles KindleFire (orange) then Full Red Screen Then Fastboot Mode.
I also reinstall using KF First Aide- Completely Restore The KFHD 8.9 8.2.1 option again.
Ruacasa said:
Fastboot is still working. I did run that command you posted: fastboot -i 0x1949 getvar product. It reported Prod: Jem-PVT-Prod-04.
I have tried the Recovery tool you linked to but it hangs when I try to restore the system (using any of the options)
Update: I was able to get KFFirstAide to complete it's recover using 8.1.2 option. I got a full red screen then it booted to the Fastboot Mode Screen. I feel I'm getting closer. I held the power button for 20 seconds, then release for 5 and power up again. It's still going into Fastboot Mode. Any advice?
Click to expand...
Click to collapse
A red screen is not good. Try Kindle Fire HD System Restore Tool http://forum.xda-developers.com/showthread.php?t=2011126
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
LinearEquation said:
A red screen is not good. Try Kindle Fire HD System Restore Tool http://forum.xda-developers.com/showthread.php?t=2011126
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
Click to expand...
Click to collapse
Appreciate the help. I tried that recovery tool a few times. Just curious, which option should be selected in that tool? I think I tried them all already, but which one should be used to completely restore? Option 1 enables fastboot (got plenty of that...lol). Option 2 restores SU. Option 3 restores SU and other stuff i don't recognize. Option 4 had google stuff I don't recognize. But I did try all of them.
Hi, I successfully rooted my KF HD 8.9 with instructions found here
http://androidroot.org/watch_video.php?v=A7HRK4M23YG7
But am now stuck in fastboot mode (displayed on screen). I did have twrp installed and got the blue logo, but not anymore.
I tried KF First Aid, under the option “Display Fastboot Status” I get
“product JEM-PVT-Prod-04
6498000040002FFF fastboot
If you see output above it looks like fastboot is enabled”
Device Manager shows under “Kindle Fire > Android ADB Interface”
Have I bricked my Kindle?
Any help greatly appreciated
Its not bricked, though I would attempt to restore the system partition with kffa since 2nd bootloader is gone. You should be in fastboot mode so that's good at least.
Sent from my Amazon Kindle Fire HD using Tapatalk
Thanks for advice, unfortunately I'm not clever enough to do that without step by step instructions, could you help me?
Thank you
phatsteve said:
Thanks for advice, unfortunately I'm not clever enough to do that without step by step instructions, could you help me?
Thank you
Click to expand...
Click to collapse
Download Kindle Fire First Aid, find the option about restoring, and if it asks something about is it in fastboot already say yes(or if it asks to put it in fastboot mode say no as it should be already).
tried that exactly as you said, everything seemed to go ok, but when it rebooted it sticks on the kindlefire (orange) logo
Try using SRT instead. Ignore the adb command it lists, that's only for if you have a working kindle that can boot up fully, just stick it in fastboot again and use this utility and see if you have any luck.
Sent from my Amazon Kindle Fire HD using Tapatalk
Hi, I've tried about 10 times to download KFHD_SRT_v2.0.zip which seems to be for my device, but it fails every time
with message ' the source file cannot be read'. I have downloaded KFHD_SRTv1.3.5.zip, which appears to be for the 7" kindle.
Can I use this, or will the imgs be wrong? There are 4 in the images folder, boot.img, recovery.img, system.img, and systym2.img
The 7" version is not for the 8.9 version, you would probably brick it even worse using that... The ones on that link I sent you are the compatible ones.
Sent from my Amazon Kindle Fire HD using Tapatalk
that is the one I'm having trouble with, KFHD_SRT_v2.1.zip. While in Kindle Fire First Aid I checked adb and got the message 'adb drivers not installed' so removed and re-installed adb drivers from Amazon, but I still get same message.
Since removing and re-installing drivers my device in device manager now only shows as 'Kindle fire > Fastboot Mode | HD 8.9. It used to say 'ADB Interface'
My kindle has an otterX (from here: http://forum.xda-developers.com/showthread.php?t=2671619 ) and i just get the Kindle Fire logo and press to open bootmenu. I cannot boot into revoery for some reason and upon clicking continue boot the kindle fire just shuts off. i can't figure out what i need to do to get it unstuck from this situation or if i can throw it into fastboot. when sitting in the bootmenu the kindle shows up in Device Manager as a Kindle Fire (below when Kindle Fire is clicked) and then Android composite ADB Interface. Would rekindle work? i seriously don't want this kindle to be bricked/broken.
pheonix1212 said:
My kindle has an otterX (from here: http://forum.xda-developers.com/showthread.php?t=2671619 ) and i just get the Kindle Fire logo and press to open bootmenu. I cannot boot into revoery for some reason and upon clicking continue boot the kindle fire just shuts off. i can't figure out what i need to do to get it unstuck from this situation or if i can throw it into fastboot. when sitting in the bootmenu the kindle shows up in Device Manager as a Kindle Fire (below when Kindle Fire is clicked) and then Android composite ADB Interface. Would rekindle work? i seriously don't want this kindle to be bricked/broken.
Click to expand...
Click to collapse
When that has happened to me it was from a incompatible recovery or corrupt recovery.
when you see the bootloader it is in Fastboot mode.
just reflash a recovery like otterx-twrp-2.7.1.0-recovery.img
in command prompt
Code:
fastboot flash recovery otterx-twrp-2.7.1.0-recovery.img
fastboot reboot
still confused...
i am getting an error saying it cannot open the file.
did you watch my video? [YouTube] OtterX ROM/TWRP/Bootloader [2014-05-08]
Sent from my Amazon OtterX using Tapatalk
i've gotten TWRP to install. i couldn't get the otterX one i needed to install so i installed one i downloaded else where. i was originally wanting KitKat on here but don't want that fiasco to happen again. unfortunately now i cannot boot normally. just gets to the Kindle Fire Logo and restarts.
Is the bootloader set to amazon or otters partitions?
Sent from my Amazon OtterX using Tapatalk
i think it's on amazon. however upon reading some articles of what i was doing the version i have now isn't able to haandle what im doing so i have to update twrp.
You need to pick a direction otterx, or other custom ROM, or stock
Sent from my Amazon OtterX using Tapatalk
using the updated version of twrp thats compatible with installing KitKat will that be possible to leave it amazon or would i need to use otterX for CM11 KitKat?
You can install whatever you want, just need to tell me so I can give correct directions.
You need to check Bootloader settings, advanced does it say amazon or or otterx partitions
Sent from my Amazon OtterX using Tapatalk
i don't see a way to check that. im using the fff-u-boot v1.5 bootloader i believe (not to sure, pretty new to android and rooting) (with openrecovery-twrp-2.2.2.1-blaze (need to update downloaded 2.8.0.2-blaze already) sorry for my being a noob with this. your helping a ton though :highfive: .
1.5 FFF is not otterx just otter
flash openrecovery-twrp-2.8.0.2-blaze.img
Code:
fastboot flash recovery openrecovery-twrp-2.8.0.2-blaze.img
fastboot reboot
in TWRP Wipe/factory reset
install cm-11-20140916-SNAPSHOT-M10-otter.zip
and PA MINI MODULAR PACKAGE GApps
in TWRP
im having an issue getting into fastboot mode. i've tried restarting my kindle and running fastboot commands. the command to install the updated twrp is still saying waiting for device.
When you see Bootloader it's in fastboot mode
Could be a drivers issue.
When I flash, I usually start with connecting USB cable, then power off kindle, run commands, reboot kindle
Sent from my Amazon OtterX using Tapatalk
The Fastboot mode finally loaded. had to pull the device manager and begin process of pointing out driver and shut off the kindle and as it hit the bootloader point i had to install driver. i believe my issues have been resolved. It booted up KitKat just now. THANK YOU!!!!!!!!!! :victory: :highfive:
Do you have backup?
mudassirrashid said:
Do you have backup?
Click to expand...
Click to collapse
Having a backup has nothing to do with the problem, that is now fixed
Haha good for you... Have nice day
I have been trying to use the KFU to root, but at the end of the command prompt, it says Waiting on Device. I have left it like this for 15 minutes to no avail and I can interact fully with the kindle. I'm running 6.3.3 on the kindle and windows 8 on my laptop. I have tried installing the drivers but no matter what I do, the kindle still shows up as Kindle Fire in device manager, although if I click the drop down arrow, it says Android Composite ADB Interface. When I load up KFU, it registers that the device is connected and says ADB Status: Connected, but Boot Status is unknown. I don't know what to try, can anyone help?
SgtStringCheese said:
I have been trying to use the KFU to root, but at the end of the command prompt, it says Waiting on Device. I have left it like this for 15 minutes to no avail and I can interact fully with the kindle. I'm running 6.3.3 on the kindle and windows 8 on my laptop. I have tried installing the drivers but no matter what I do, the kindle still shows up as Kindle Fire in device manager, although if I click the drop down arrow, it says Android Composite ADB Interface. When I load up KFU, it registers that the device is connected and says ADB Status: Connected, but Boot Status is unknown. I don't know what to try, can anyone help?
Click to expand...
Click to collapse
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
sd_shadow said:
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
Click to expand...
Click to collapse
Ohhh thanks!
sd_shadow said:
kindle Fire utillity does not root 6.3.3
see [How To][Root] Kindle Fire 1 update 6.3.3
Click to expand...
Click to collapse
I got my kindle rooted with a custom recovery, but now I'm stuck in a boot loop, can you help
SgtStringCheese said:
I got my kindle rooted with a custom recovery, but now I'm stuck in a boot loop, can you help
Click to expand...
Click to collapse
Can you get to TWRP?
What do you want to do? Install a custom rom?
sd_shadow said:
Can you get to TWRP?
What do you want to do? Install a custom rom?
Click to expand...
Click to collapse
Yes I can get to twrp, but I cannot boot into the OS. If I boot up and select boot normally, it goes to the orange kindle fire logo then the screen cuts off. I'd like install CM 10 which I have downloaded on my laptop.
SgtStringCheese said:
Yes I can get to twrp, but I cannot boot into the OS. If I boot up and select boot normally, it goes to the orange kindle fire logo then the screen cuts off. I'd like install CM 10 which I have downloaded on my laptop.
Click to expand...
Click to collapse
Just use mount sd card option in twrp.
mount>check sd card >mount usb
should get a popup in windows>click view files
copy CM10 and Gapps to sd card
unmount usb in TWRP
wipe>factory reset
install Cm10 and gapps
sd_shadow said:
Just use mount sd card option in twrp.
mount>check sd card >mount usb
should get a popup in windows>click view files
copy CM10 and Gapps to sd card
unmount usb in TWRP
wipe>factory reset
install Cm10 and gapps
Click to expand...
Click to collapse
You're a lifesaver dude! I'm in cyanogen mod now
SgtStringCheese said:
You're a lifesaver dude! I'm in cyanogen mod now
Click to expand...
Click to collapse
Great, If you want to upgrade to CM11 you will have to upgrade twrp first.
http://forum.xda-developers.com/kin...indle-fire-flashable-recoveries-twrp-t2811253