I just checked out AICP (transition from ZVD to AICP was seamless, wonderful!) and when I restored my backup I lost knock-on functionality (no true surprise). Now when I went to my dialer and used the HiddenMenu code (5689#*980#) and the Hidden Menu doesn't have the option for updating the touch FW anymore. I need the HiddenMenu.apk from ZV8, does anyone have it? I'm going to TOT back to ZV8 in a minute, but if anyone already has the file, I'd appreciate it. If not I'll upload it to Mega and post the link.
Here. https://www.dropbox.com/s/7aamepl526k8ya6/HiddenMenu.apk?dl=0
Sent from my LG-LS980 using XDA Free mobile app
ToledoG28 said:
Here. https://www.dropbox.com/s/7aamepl526k8ya6/HiddenMenu.apk?dl=0
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I found it on Reddit too. Was a pain in the arse to get the command line to launch that menu and not the ZVD one. Not sure how I did it, but everything works again and I didn't have to TOT.
official.xian said:
Thanks, I found it on Reddit too. Was a pain in the arse to get the command line to launch that menu and not the ZVD one. Not sure how I did it, but everything works again and I didn't have to TOT.
Click to expand...
Click to collapse
How did you fix the knock on ? Please tell me the procedure too.
midskool said:
How did you fix the knock on ? Please tell me the procedure too.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2763290
Near the bottom of post #1.
Before I flashed the new app, I renamed the old app and it's odex file with .bak at the end using ES File Explorer. When I flashed the new app I also cleared Davlik and Cache. Don't know if all that is necessary, but it worked for me.
NavyLCDR said:
http://forum.xda-developers.com/showthread.php?t=2763290
Near the bottom of post #1.
Before I flashed the new app, I renamed the old app and it's odex file with .bak at the end using ES File Explorer. When I flashed the new app I also cleared Davlik and Cache. Don't know if all that is necessary, but it worked for me.
Click to expand...
Click to collapse
I flashed the file via flashify and try flashing using the option cwm and TWRP/Philz. Also cleared Dalvik And Cache. I did this because I am on stock recovery. and obviously I'm rooted). then I restarted.
But I get this when I dial 5689#*980#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
official.xian said:
Thanks, I found it on Reddit too. Was a pain in the arse to get the command line to launch that menu and not the ZVD one. Not sure how I did it, but everything works again and I didn't have to TOT.
Click to expand...
Click to collapse
Can you please mention the method which you used to manually launch the command line for the Hiddenmenu of Z8. I'm currently on 4.4.2 ZVD and flashing that file with TWRP which you had mentioned didn't helped me out. Now when I'm dialing 5689#*980# It does not open anything.
midskool said:
Can you please mention the method which you used to manually launch the command line for the Hiddenmenu of Z8. I'm currently on 4.4.2 ZVD and flashing that file with TWRP which you had mentioned didn't helped me out. Now when I'm dialing 5689#*980# It does not open anything.
Click to expand...
Click to collapse
You should not have installed via TWRP or anything else. You should have simply copied the file using a program like Root Browser ( https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree ) to /system/app, then running. Here is a step-by-step. You'll also need Terminal Emulator ( https://play.google.com/store/apps/details?id=jackpal.androidterm ).
**You will need root for this**
1. Download the APK file in the previous post.
2. Download and install Root Browser and Terminal Emulator from the Play Store.
3. Launch Root Browser and navigate to /system/app
4. Rename HiddenMenu.apk -> HiddenMenu.apk.backup
5. Rename HiddenMenu.odex -> HiddenMenu.odex.backup
6. Copy the HideenMenu.apk that you downloaded in step 1 to /system/app
7. Restart your phone.
8. Launch Terminal Emulator
9. Run the following command:
Code:
su
10. Run the following command:
Code:
am start -a android.intent.action.MAIN -n com.lge.hiddenmenu/com.lge.hiddenmenu.HiddenMenu
Now you should be able to go into HW Test and Touch Test to update the Touch Firmware.
Edit: See the original Reddit thread here: http://www.reddit.com/r/lgg2/comments/2be2cs/cloudy_g3_back_to_stock_rooted_knock_on_doesnt/
Permalink to the specific comment I'm referring to: http://www.reddit.com/r/lgg2/comments/2be2cs/cloudy_g3_back_to_stock_rooted_knock_on_doesnt/cj4e7id
Okay follwed the instruction. still no luck !
See my screenshot.
Related
Hi,
After changing roms and then using the Samsung Account to restore the Notes, first I had a Force Close when opening the app and then after syncing, I can see the notes but when I open them the error "Error occurred" appears. The force closed was solved reflashing through ODIN.
I am with a pre-rooted DLL4 Stock Rom.
I tried:
1) Clear the app data and cache
2) Rebooting
3) Fixing permissions
4) Reflash stock via Odin
5) Remove samsung account and add it again, wait for syncing before opening the app
6) Changed Kernell
I have one important note I need to open, but there is no way to open it from the web... it seems I need to open it from the phone.
Thanks for the help,
Damián.
Same problem here any help please? Can i open the corrupted note from any alternative source rather than my note
Sent from my GT-N8000 using Tapatalk HD
This is totally unacceptable. .. I've tried everything
Sent from my GT-N7100 using xda app-developers app
damianmb said:
Hi,
After changing roms and then using the Samsung Account to restore the Notes, first I had a Force Close when opening the app and then after syncing, I can see the notes but when I open them the error "Error occurred" appears. The force closed was solved reflashing through ODIN.
I am with a pre-rooted DLL4 Stock Rom.
I tried:
1) Clear the app data and cache
2) Rebooting
3) Fixing permissions
4) Reflash stock via Odin
5) Remove samsung account and add it again, wait for syncing before opening the app
6) Changed Kernell
I have one important note I need to open, but there is no way to open it from the web... it seems I need to open it from the phone.
Thanks for the help,
Damián.
Click to expand...
Click to collapse
Same problem here. Hope a solution will come up soon.
'Solved: S Note Error Occurred'
I was able to solve the 'S Note error occurred' which prevented me from opening any of the sample files and many other templates by:
1) deleting all my non-working template snb files in /sdcard0/S Note
2) Copy and paste new template snb files from post 3092 here:
http://forum.xda-developers.com/showthread.php?t=1609252&page=310
3) You can also pull snb files from SNote apk by changing 'apk' to 'zip' then open the zip ( files located in 'Asset'). You change 'zip' back to 'apk'.
4) I rebooted the phone for good measure (maybe not needed)
5) SNote now works perfectly
please HELP
i have the same issue and above 180 pages of studies summary is corrupted.. i have download the file to my pc and change to zip.. when i change to zip i can see the images and my notes in xml sheet. can anyone help me to fix this .. i want to get the file in any format just i want it to work. please
I SOLVED
Here is the solution:
1. Download app called RAR from the Play Store
2. Open .snb file from it (explorer of the RAR)
3. Choose "Repair archive" from the option. It will build "rebuilt......snb" file. You can open it again from S-Note as well as from "my files".
It worked for me.
Baklava-leblebi said:
Here is the solution:
1. Download app called RAR from the Play Store
2. Open .snb file from it (explorer of the RAR)
3. Choose "Repair archive" from the option. It will build "rebuilt......snb" file. You can open it again from S-Note as well as from "my files".
It worked for me.
Click to expand...
Click to collapse
That's a 5 years old thread...too late..lol
MigoMujahid said:
That's a 5 years old thread...too late..lol
Click to expand...
Click to collapse
Dude it appears first in search results couldn't leave it unsolved. You know, millions read search solutions and when they find them just 2 or 3 of them thanking you.
Baklava-leblebi said:
Dude it appears first in search results couldn't leave it unsolved. You know, millions read search solutions and when they find them just 2 or 3 of them thanking you.
Click to expand...
Click to collapse
It's fine bro, great that you have a long sight like that :good:
MigoMujahid said:
That's a 5 years old thread...too late..lol
Click to expand...
Click to collapse
Hey. I tried this out and it didn't work. :crying::crying:
It created a 'repaired' version of the note but even that still displays the "error occured" when I try to open.
I'm using a Samsung Note 1
Hunnyelle said:
Hey. I tried this out and it didn't work. :crying::crying:
It created a 'repaired' version of the note but even that still displays the "error occured" when I try to open.
I'm using a Samsung Note 1
Click to expand...
Click to collapse
Are you sure you followed the steps right? I did use the app “RAR” .( But I haven’t updated the app for a while).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All I can say is that try more than once. I found solution it means(at least for you) those note files are not disrupted. I hope you could find solution too:angel:
So has anyone applied the security update and maintained root? I ask this because the update says it will fix security flaws and malicious exploits (root falls here) so has anyone had problems with it and root??? Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I clicked it.
I clicked it and I still have root. Now I am wondering if I screwed up.
Mee too....you probably didn't but I wanted to make sure it didn't break root
4.4 debrick file needed
crazymonkey05 said:
Mee too....you probably didn't but I wanted to make sure it didn't break root
Click to expand...
Click to collapse
sir as u have rooted ur phone please do me a favour please make a debrick file and uplad it if u dont mind as i hardbricked my phone after 4.4 update thanks in advance
OK so I applied the update and root is fine so we are good there.... [saqib] I'm not entirely sure how to create a debrick image
In the how to debrick thread I posted a recovery flashable script you can use. Just flash in recovery and itll do the rest. Once done just upload the debrick.img it created on your sdcard.
If you cant find the script, let me know. Might be several pages back in the thread.
crazymonkey05 said:
OK so I applied the update and root is fine so we are good there.... [saqib] I'm not entirely sure how to create a debrick image
Click to expand...
Click to collapse
How were you notified of the security update? I'm on TMS3KK-1.1-KOT49H.1747UCUFNE4. It's a TW rooted ROM
Is the script for stock recoveries?
And @OKAstro it was in my status bar....you can also go sys. Settings>more>security>security updates
crazymonkey05 said:
And @OKAstro it was in my status bar....you can also go sys. Settings>more>security>security updates
Click to expand...
Click to collapse
I don't see "security updates" under Security
Here is my system info everyone in case its changed
OKAstro said:
I don't see "security updates" under Security
Click to expand...
Click to collapse
If you are on a custom rom it was probably removed by the dev, along with the software update service
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
debrick file method
crazymonkey05 said:
Is the script for stock recoveries?
Click to expand...
Click to collapse
After updating SuperSU, it gave me options to disable KNOX, which disabled the annoying blocking of apps(I believe it did).
2.I installed busybox from the Play Store. I also installed Android Terminal Emulator from the Play Store.
3. I opened Android Terminal Emulator and entered these two lines, entering between them After entering the first, I granted root access, then ran the second line.
su
busybox dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=128
4. After those two lines were ran, the debrick.img file was on the root of either the external or internal sdcard. I copied that file to my desktop, and inserted my sd card into my computer(Using the MicroSD to SD Adapter).
5.Finally, I used Win32DiskImager to write the files to the Micro SDcard. After that, I pulled my battery and inserted the Micro SDCard into my phone and it was able to boot into recovery and download mode.
Hello,
On ES File Explorer
https://play.google.com/store/apps/details?id=com.estrongs.android.pop (BETA version - 4.0.1)
Yesterday, befor go to sleep, i has correct admin right, if i wanted i could editing any file in system folder, i was the toast admin notification when i opened the app but this morning, i take my phone and re-open ES but i hasn't the toast notification of ES so i have uncheck the root option, close the app, re-check the root option but nothing..
I have uninstall this app via Tiatnium Backup, reboot in TWRP and wipe cache & dalvik but it was not fix my problem..
Anyone have this issue too ? (i have make no one modifications before uninstalling the app so i have no idea ..)
Thanks.
Rom said:
Hello,
On ES File Explorer
https://play.google.com/store/apps/details?id=com.estrongs.android.pop (BETA version - 4.0.1)
Yesterday, befor go to sleep, i has correct admin right, if i wanted i could editing any file in system folder, i was the toast admin notification when i opened the app but this morning, i take my phone and re-open ES but i hasn't the toast notification of ES so i have uncheck the root option, close the app, re-check the root option but nothing..
I have uninstall this app via Tiatnium Backup, reboot in TWRP and wipe cache & dalvik but it was not fix my problem..
Anyone have this issue too ? (i have make no one modifications before uninstalling the app so i have no idea ..)
Thanks.
Click to expand...
Click to collapse
Have you opened the log section in supersu and checked the entry for ES? and do you have re-authentication enabled in supsu settings?
Will_Xda said:
Have you opened the log section in supersu and checked the entry for ES? and do you have re-authentication enabled in supsu settings?
Click to expand...
Click to collapse
Yes, there is no entry foe ES and i always enable the re-authentication option :good:
Rom said:
Yes, there is no entry foe ES and i always enable the re-authentication option :good:
Click to expand...
Click to collapse
Have you enabled root explorer in the es settings?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
startswithPendswithOOH said:
Have you enabled root explorer in the es settings?
View attachment 3447190
Click to expand...
Click to collapse
Yes i have enable it.
Any others ideas ?
Rom said:
Yes i have enable it.
Any others ideas ?
Click to expand...
Click to collapse
My bad. I think you mentioned that you did enable it in your 1st post. Try an older version of es and/or also try to reflash superuser zip in twrp. Weird how it just stopped working though
startswithPendswithOOH said:
My bad. I think you mentioned that you did enable it in your 1st post. Try an older version of es and/or also try to reflash superuser zip in twrp. Weird how it just stopped working though
Click to expand...
Click to collapse
Personaly, i think that this bug come from ES apk file, i am on a beta version so it can come from a bug that will be fix in next version..
Rom said:
Personaly, i think that this bug come from ES apk file, i am on a beta version so it can come from a bug that will be fix in next version..
Click to expand...
Click to collapse
Yeah...that's why I mentioned trying an older, more stable version of ES. BETA can do weird things. (The link you provided brings me to 3.2.5.5...where is 4.0.1?) I'm on 3.2.5.5 and all is well...maybe try 3.2.5.4?
Good luck. Sorry I couldn't help.
Rooted only:
Download app: http://d-h.st/ppAR
Make sure unknown sources is checked
Install
open app
Enable native hotstop
Reboot
done
OLD:
Backup
Download sqlite editor from playstore
Open app
Open menu
open database
by browsing.
Then go to data/data/com.android.providers.telephony
Databases
Click Telephony.db press select at the bottom
select carriers
click data in tabs
Edit only n.ispsn apns 4 in all click edit to the left
Scroll down to Type and add ",dun" without " or spaces after mms
Click ok on each after changing
Reboot
Some changes were changed from the OP to work on edge plus.
Thanks for info from (Sham-roc)
MonkeyAround said:
Rooted only
Backup
Download sqlite editor from playstore
Open app
Open menu
open database
by browsing.
Then go to data/data/com.android.providers.telephony
Databases
Click Telephony.db press select at the bottom
select carriers
click data in tabs
Edit only n.ispsn apns 4 in all click edit to the left
Scroll down to Type and add ",dun" without " or spaces after mms
Click ok on each after changing
Reboot
Some changes were changed from the OP to work on edge plus.
Thanks for info from (Sham-roc)
Click to expand...
Click to collapse
Well Easier way is to is after rooted is to install Galaxy Tools you can find it in the note 5 sprint area ad install and select enable hotspot and it will reboot and your done . been on root and xposed since the mm tar was first posted and everything is still running smooth.
Click to expand...
Click to collapse
mystahsouljahboy said:
Well Easier way is to is after rooted is to install Galaxy Tools you can find it in the note 5 sprint area ad install and select enable hotspot and it will reboot and your done . been on root and xposed since the mm tar was first posted and everything is still running smooth.
Click to expand...
Click to collapse
Do you know how to get Hotspot toggle back in notification panel.
Click to expand...
Click to collapse
MonkeyAround said:
...............
Scroll down to Type and add ",dun" without " or spaces after mms
Click to expand...
Click to collapse
hi!
please show screenshot
with these changes
thanks
Did all this, changed the 4 entries with no spaces or ". Rebooted, It launched hotspot at first, then about 15 seconds past and it shut down with the "subscribe" pop up. Checked the database again and everything is changed how I changed it. Very weird. I'm using the latest build on the S6 Edge+ from sprint. Below is a screenshot of my database, did I do something wrong? And yes I'm fully rooted!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
intristin said:
Did all this, changed the 4 entries with no spaces or ". Rebooted, It launched hotspot at first, then about 15 seconds past and it shut down with the "subscribe" pop up. Checked the database again and everything is changed how I changed it. Very weird. I'm using the latest build on the S6 Edge+ from sprint. Below is a screenshot of my database, did I do something wrong? And yes I'm fully rooted!
Click to expand...
Click to collapse
Just make it easy on your self, install GT Tools. Did this last week while on vacation and had no issues with it.
Sent from my SM-G928P using XDA-Developers mobile app
Beandip-Javier said:
Just make it easy on your self, install GT Tools. Did this last week while on vacation and had no issues with it.
Sent from my SM-G928P using XDA-Developers mobile app
Click to expand...
Click to collapse
I got Galaxy Tools 3.1.5 with the 3.1.8 update from that guy in the note forums and all I get a upgrade loop and nothing happens.
Gt did the trick, some reason modding manually doesn't save after reboot. Still can't get Hotspot toggles.
Can anyone give me the link of GT?
albaniandroid said:
Can anyone give me the link of GT?
Click to expand...
Click to collapse
http://d-h.st/ppAR
How-To Root PX5 HU with Android 9.0!
I had a little time and scripted a few files to make it a little easier to root!
Step by Step:
1. Download and Install "Joying Extra Tools" apk to HU, run and click on the button "Enable/Disable adb over WiFi" and "Enable" it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Reboot your HU!
You can do this in the Factory Settings with the Code "hctreboot".
3. After Successfull reboot, extract "SuperSU-PX5-Android_9.0-ARM64.zip" to Desktop and open the folder.
NOTE: It could fail several times, just open the .bat again until everything has run through cleanly. As on the screenshots it should look then!
4. Open "1. Disable DM-Verity.bat" and enter your IP-Adress from your HU!
Wait for Finish and press Enter!
5. Open "2. Reboot.bat" and enter your IP-Adress from your HU!
Wait for Finish and press Enter!
6. After Reboot open "3. Rooting.bat" and enter IP-Adress from your HU!
Wait for Finish and press Enter!
7. Open "4. Reboot.bat" and enter your IP-Adress from your HU!
Wait for Finish and press Enter!
8. After Reboot you can see the SuperSU App with Full Root Access!
Warning: When the SuperSU App asking for updating the binary, click on Cancel. Otherwise the ROM could not boot anymore.
9. Open "Joying Extra Tools" and click on the button "Enable/Disable adb over WiFi" and "Disable" it.
10. Reboot your HU!
You can do this in the Factory Settings with the Code "hctreboot".
11. Done!
Credits goes to @HvdWolf for the Joying Extra Tools Application!
Is there any difference between the latest super su and this „special“ PX5 Version?
LinkseD said:
Is there any difference between the latest super su and this „special“ PX5 Version?
Click to expand...
Click to collapse
Nope it's the same latest SuperSU from 2017..
Too bad, since i cant get Viper4Android and Adaway to work with SuperSu
LinkseD said:
Too bad, since i cant get Viper4Android and Adaway to work with SuperSu
Click to expand...
Click to collapse
I will try a rooting method with Magisk with patched boot.img!
I'm busy in the next 4 days!
Use Blockada instead of Adaway!
This would be super nice, like in the currently provided roms.
LinkseD said:
This would be super nice, like in the currently provided roms.
Click to expand...
Click to collapse
I can try, but I can't promise, because Magisk works in the kernel.
Works brilliant... Thank you!
Thanks,
Works for me...
Thanks my boss it's work for me
Thanks for the Feedback
It got stuck in the script so I manually ran the commands - All good
Hello,
Must I reboot the HU after every action?
1-2-Hak said:
It got stuck in the script so I manually ran the commands - All good
Click to expand...
Click to collapse
When it's stuck, close the .bat file and open the .bat again
Here from OP:
NOTE: It could fail several times, just open the .bat again until everything has run through cleanly. As on the screenshots it should look then!
Dricus68 said:
Hello,
Must I reboot the HU after every action?
Click to expand...
Click to collapse
Yes it's needed because deactivate DM-Verity and then rooting.
Thanks,
Works for me....
Thank you for the guide.
Everything works great.
Hi,
I have successfully rooted my mtce head unit with this method however it is not giving to ability change system files with root manager.
julien_blanche said:
Hi,
I have successfully rooted my mtce head unit with this method however it is not giving to ability change system files with root manager.
Click to expand...
Click to collapse
The same here. I can not change system files.
julien_blanche said:
Hi,
I have successfully rooted my mtce head unit with this method however it is not giving to ability change system files with root manager.
Click to expand...
Click to collapse
The same here is rooted but I can't change the system files.
It's known here..
Thx for feedback.
I try to fix it tomorrow and will share v2.0