[Q] JB then CWM and CM 10.1 - Galaxy Ace II Q&A, Help & Troubleshooting

Hi,
I flashed I8160 from GB to JB and its working fine (ver. I8160XXNB1_I8160OXXNB4). Now i wanted to install CWM and CM on a device. These are zips so ofc I would do that from recovery but saddly I can install zip only from external sd card (which I dont have) or via ADB (never done that but I read some articles and its probably nothing diffucult) so I was looking for other way such as flashing recovery via Odin. I tried to do this but Odin stopped at NAND start writing (or sth) and then nothing happend (im not so sure do I picked proper recovery so that may be it :<). I unplugged device and flashed JB again so now it is working.
So: Do you have any advice what could I do? Or simply recovery.img file?

Related

[Q] CWM problem.. help!!!!!! PLZZZZZ

so i just downloaded the rom in the link (http://forum.xda-developers.com/showthread.php?t=2051374) and when i extracted the file with CWM and i rebooted my phone it wasnt reboooting so i thought i bricked my phone so i took the battery out and put it on recovery and it turns out i LOST CWM!! so i just rebooted my phone and left it. when i came back it actually booted up and is working fine BUT now i dont have a recovery!?!?!
I stll have the zip file on my sdcard i just wanna know how to get CWM on my phone again. im properly rooted and everything. i have cwm zip, file i just dont know how to install it or whatever the process is..PLZ HELP!!!![/B]
jawad608 said:
so i just downloaded the rom in the link (http://forum.xda-developers.com/showthread.php?t=2051374) and when i extracted the file with CWM and i rebooted my phone it wasnt reboooting so i thought i bricked my phone so i took the battery out and put it on recovery and it turns out i LOST CWM!! so i just rebooted my phone and left it. when i came back it actually booted up and is working fine BUT now i dont have a recovery!?!?!
I stll have the zip file on my sdcard i just wanna know how to get CWM on my phone again. im properly rooted and everything. i have cwm zip, file i just dont know how to install it or whatever the process is..PLZ HELP!!!![/B]
Click to expand...
Click to collapse
That Rom is based off Kobridges FL16 deodexed JB Rom. Since we do not have source, the stock kernel only has stock recovery. In other words, you will not have cwm after flashing because of the stock kernel. What everyone is doing if they want to load zips is use mobile Odin to flash EL29 direct boot cwm or el26 cwm. Then flash whatever zip you need then flash stock TW JB kernel and reboot. Once you flash the stock kernel, it removes cwm.
Steps how I do it
DL EL29 direct boot cwm, save on sd
DL any zips you want to install
DL mobile Odin
Use mobile Odin flash EL29 direct boot cwm
When phone reboots to cwm, flash zips
Flash stock FL16 KERNEL
Reboot

[Q] Won't boot rom or cwm recovery - only download mode

Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards

[Q] How should I go about unbricking my friends phone?

Hello, my friend has a Ace 2 (GT-I8160) and he wanted me to try and install CM 11 on his phone. I managed to root it and install temporary CWM on it, however his version of CWM could not flash CM 11 ROM's because it was outdated. I Googled around and found a TWRP .img file that I decided to flash via ODIN (CWM couldn't flash any TWRP .zip files for some reason). Everything went perfectly fine with ODIN, however my friends phone could not go pass the Samsung logo, it would appear for a few seconds and then the screen would go black. He also couldn't go into recovery but he could go into Download mode. Thinking that it was a recovery problem, I managed to get a .img file of TWRP 2.8.6.0 by Chronomonochrome and flash that via ODIN. Still the same problem - phone won't go pass the logo, however it can go into recovery.
So, now the phone boots perfectly to Download mode and recovery - and it can do everything from the recovery, like making backups, wiping, etc, but it cannot boot to the OS itself. I still haven't flashed a custom ROM on his phone because he didn't have the ROM file on his phone at the time nor could be transfer it to his phone via his PC because of some driver issue.
I'm currently downloading I8160XXBN1 firmware from Samsung Updates to flash via ODIN and try to get his phone back into working state. However, I also planned on placing my SD Card (which has the CM rom and Gapps on it) into his phone and flashing a new, custom ROM instead of flashing the firmware.
Does anyone have any advice on what I should do? Should I flash official firmware via ODIN or just flash the ROM using the recovery?
Thanks in advance.

Can't Find Any Partitions On TWRP

Hey guys, i think i messed up my internal storage partitions. Big story though. I have TWRP 2.8.6.0 but i can't flash/do anything, it won't find any partitions...not even sd cards. The phone can boot and works fine. Is there any way to fix the internal partition through the terminal? Or my only option is to flash stock rom and then flash again?
Greetings.
Hi Chrizz,
I think you have the same problem as me. Still no luck on solving.
http://forum.xda-developers.com/galaxy-ace/ace-2-help/gt-i8160-ace2-reset-t3200779
Greetzz
i installed a new rom with ace2nutzer's kernel (20150821 build) and my device became really laggy too. Then i flashed chrono kernel, it was working fine. But when i went to the recovery again it flashed twrp 2.8.6.0, probably from the chorono kernel but i used to have cwm recovery. Now the only thing i can see in TWRP is some systems files like efs,ramdisk, etc.
From the zip of twrp recovery (use twrp_2.8.7.0_280815.zip download it from developer section) Extract the file tmp/twrp.fstab and copy it to /ramdisk manually, you could use root Browser for doing that.
I solved the problem with this procedure

Stuck in download mode

Hi there! I've found this device from many years ago and from what I can remember I tried to root and install a new rom, but something happened. Now, when I want to switch it on always appear this screen:
http://imgur.com/FkLYEiL
Now I can go to fastboot mode, but it won't reboot normally, there is always that screen..
So, what I've to do now? Thank you for your time!
Possible solution?
I've had this too, simply install cwm via odin (twrp should work too but I've done this with cwm and succeeded so I recommend using that for now), then put a rom on your sd card and install it, or you can (after installing cwm) flash the stock firmware, simply look for your model of s4 mini on google for stock firmware and you should find it, update me with what you get.

Categories

Resources