Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards
Related
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
kaif15 said:
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
Click to expand...
Click to collapse
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Misterjunky said:
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Click to expand...
Click to collapse
The app is constantly crashing!
It would start for a second then close. I tried the TWRP manager as well with the same result.
I've lost root access when I Odined back to stock, won't I need root access to install new recoveries?
Sounds like you flashed the stock 4.4 firmware and now need recovery to root. Flash this TWRP file using Odin http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.1-hltetmo-4.4.img.tar
Once you flash it, you need to boot into recovery to install supersu to root.
Switch off the Galaxy Note 3 (remove the battery and reinsert if needed)
Next, press and hold simultaneously Volume Up, Home and Power.Release the buttons when the screen flickers and wait for the TWRP menu.
Select Reboot, then System and install Supersu for root.
Once booted, open Supersu to update it and grant permission.
Hope this helps. Good luck.
Trying to figure this out. Browsed forums for the last 24 hours, unable to come up with a way to figure it out. I was running Effortless rom, and older version that I can't remember, but it was on NF6 firmware. I wanted to play around with cm11 so I decided to flash back to stock NF6 then update to NF9 for the VOLTE update just to have it. So I triangled away, wiped then rooted and installed TWRP via ODIN, made a backup, everything went fine. Then I downloaded cm11 and gapps 4.4.4 and put them on my internal sd and went to flash in TWRP but cm11 was giving me errors. I figured it may have been TWRP so i decided to flash CWM but no go. It wouldn't stick. Tried again, no luck. Downloaded ROM Manager and this time I installed CWM through there. Tried rebooting in to recovery and ended up getting stuck in the "recovery booting" bootloop, so I flashed stock NF9(since I was on this firmware now) and tried installing CWM again, no luck. When I tried booting to recovery, it was stock NB4 recovery. I'm thinking that I'm stuck on an old bootloader and the recovery isn't NF9, which is the current stock recovery. I'm thinking that the reason why I'm unable to flash anything in TWRP/unable to install CWM at all is because of the stock recovery and possibly bootloader being NB4 for some reason while my baseband and build are both NF9. Any ideas/help would be appreciated. Thanks guys.
re: custom recovery
pyr0path said:
Trying to figure this out. Browsed forums for the last 24 hours, unable to come up with a way to figure it out. I was running Effortless rom, and older version that I can't remember, but it was on NF6 firmware. I wanted to play around with cm11 so I decided to flash back to stock NF6 then update to NF9 for the VOLTE update just to have it. So I triangled away, wiped then rooted and installed TWRP via ODIN, made a backup, everything went fine. Then I downloaded cm11 and gapps 4.4.4 and put them on my internal sd and went to flash in TWRP but cm11 was giving me errors. I figured it may have been TWRP so i decided to flash CWM but no go. It wouldn't stick. Tried again, no luck. Downloaded ROM Manager and this time I installed CWM through there. Tried rebooting in to recovery and ended up getting stuck in the "recovery booting" bootloop, so I flashed stock NF9(since I was on this firmware now) and tried installing CWM again, no luck. When I tried booting to recovery, it was stock NB4 recovery. I'm thinking that I'm stuck on an old bootloader and the recovery isn't NF9, which is the current stock recovery. I'm thinking that the reason why I'm unable to flash anything in TWRP/unable to install CWM at all is because of the stock recovery and possibly bootloader being NB4 for some reason while my baseband and build are both NF9. Any ideas/help would be appreciated. Thanks guys.
Click to expand...
Click to collapse
If I were you the first thing I would do is to ODIN flash TWRP recovery
and go from there.
Here is a direct download link for the latest odin flash twrp
custom recovery for the N900T Note 3:
https://app.box.com/AndroidShare
Once you get into twrp recovery do a complete wipe
which includes wipe data, system, cache, dalvik and
last but not least do a factory reset in twrp.
When that's done odin flash the official stock N900T NF9
firmware which can be found at http://SamMobile.com
After that's done you will need to odin flash cf-autoroot
and then odin flash twrp recovery again.
Here is the download link for cf-autoroot:
https://app.box.com/s/rgovggya5gkc51lc1uax
Then simply copy your favorite N900T zip file rom into
your internal sd and flash the N900T rom of your choice.
Be sure to do a full and complete wipe again before
flashing any custom roms.
Good luck!
Hello, my friend has a Ace 2 (GT-I8160) and he wanted me to try and install CM 11 on his phone. I managed to root it and install temporary CWM on it, however his version of CWM could not flash CM 11 ROM's because it was outdated. I Googled around and found a TWRP .img file that I decided to flash via ODIN (CWM couldn't flash any TWRP .zip files for some reason). Everything went perfectly fine with ODIN, however my friends phone could not go pass the Samsung logo, it would appear for a few seconds and then the screen would go black. He also couldn't go into recovery but he could go into Download mode. Thinking that it was a recovery problem, I managed to get a .img file of TWRP 2.8.6.0 by Chronomonochrome and flash that via ODIN. Still the same problem - phone won't go pass the logo, however it can go into recovery.
So, now the phone boots perfectly to Download mode and recovery - and it can do everything from the recovery, like making backups, wiping, etc, but it cannot boot to the OS itself. I still haven't flashed a custom ROM on his phone because he didn't have the ROM file on his phone at the time nor could be transfer it to his phone via his PC because of some driver issue.
I'm currently downloading I8160XXBN1 firmware from Samsung Updates to flash via ODIN and try to get his phone back into working state. However, I also planned on placing my SD Card (which has the CM rom and Gapps on it) into his phone and flashing a new, custom ROM instead of flashing the firmware.
Does anyone have any advice on what I should do? Should I flash official firmware via ODIN or just flash the ROM using the recovery?
Thanks in advance.
Dear All,
Here's the problem:
The Goal: To Install CM-12.1 Custom ROM
What I have done:
1. Installed TWRP Recovery Manager and no matter how many times I tried, was unable to install TWRP Recovery
2. Installed Flashify, not possible to install TWRP, CWM or any other recovery!
3. Installed Rashr and finally was able to get PhilZ Touch 6 Recovery installed on the phone.
Rebooted to recovery and it's working! Great!
Now, I have the CM-12.1 zip file on the external SD card but can't flash the ROM no matter how many times I try. Yes, I did wipe factory reset and all the wipes possible, NOT ABLE TO INSTALL the Custom ROM.
The real problem now is that before I tried installing the custom ROM, I accidentally made a mistake, a really bad one too.
When my phone was starting normally, in Flashify (or Rashr, I don't remember now) I selected the downloaded TWRP recovery image for Kernel and rebooted the phone. Yes, a dumb move, I know, but for some stupid reason I did that! And now the phone won't start!!!
Getting this msg:
Set Warranty Bit: kernel
Plus, when I boot into Philz Touch 6 recovery, not able to install ROM or do anything else either.
I managed to install Aroma File Manager, and deleted some of the twrp recovery images, but still getting the kernel error.
Also, in Philz Touch recovery, I have done something wrong and I think I may have lost ROOT access. Tried several times to Re-Root Super SU but it says now install Super SU from the Market. How can I install Super SU from market if I cannot get the phone to start in the first place.
Anyway, if anyone knows how to fix these issues or has experienced similar problems, please share the steps you took to solve the problem.
All the help is appreciated!
Thanks vey much in advance!!!
P.S. Please write in comments if any screen capture is needed.
BOOTLOOP!
If anyone can, please help, I can't use my phone for over a week now!!!
the phone is stuck in bootloop!
the recovery I was using apparently wasn't the right version for my gt-i9192 and for some stupid reason it thought that my phone is gt-i9190!!! i was using twrp 3.0.0.0 serrano3gxx by the way. and i could not install the custom rom, the right rom for gt-i9192... because the recovery thinks my phone is gt-i9190... stupid right
so i installed openrecovery-twrp-2.8.7.0-serranodsxx-STABLE-signed zip file using the twrp recovery itself. and now i can't even go to recoery mode!!! WOW!! I think i ****ed up this phone big time!!!
i know there was a warning to not install the recovery using the recovery itself, but i didn't have a choice.
i did that because Odin is not working for my phone!! can't install anything with odin...
it just gets stuck and never finishes the flash. can't install anything with odin, nothing at all. just gets stuck!!
so now the problem is this stupid bootloop and on top of that i can't even get the phone to start the recovery, when I try, it goes back to this bootloop problem. by the way this is the bootloop msg:
Set Warranty Bit : kernel IN YELLOW COLOUR and the phone logo: Samsung Galaxy S4 mini GT-I9192
I tried booting my HTC ONE M8 into recovery mode and I got a warning sign on the screen which stayed for about 20 mins before the phone automatically rebooted and it's working fine, does this mean that I don't have a working recovery? And how can I fix it. Screenshots attached.
That's a working stock recovery. Why do you need to boot to stock recovery ? You won't be able to install custom ROM with stock recovery, you need custom recovery like TWRP installed first.
BUT first thing you need to do is update your current firmware to at least 4.21.512.4. If not, no use to install TWRP as most custom ROM won't work on your current firmware.
Go back to your thread and read again the link given to you. You won't accomplish anything without reading
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-doesnt-update-option-t3434099