Hi
When upgrading firmware with kies,I lost partition information on SGH-M919 S4.
right now, I guess my S4 is soft bricked. all i can do is put phone in download mode , i tried with all the .tar files for the model none of them had pit file in it. below is the odin error. If any one can help me by extracting pit file from their phone and post it , I will be thankful.
Below are the odin errors, i am getting
######
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/020> Removed!!
<ID:0/020> Added!!
###
I connected S4 directly to pc , no Hub in between.
Below is the link to , how to extract pit file
http://forum.xda-developers.com/showthread.php?t=2582899
Thanks
Related
Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution
Ary22m said:
Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution
Click to expand...
Click to collapse
What rom are you currently using?
deivid50 said:
What rom are you currently using?
Click to expand...
Click to collapse
Android 4.1.2 Jelly Bean
Try a different USB port and/or different PC.
thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you dears
Thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
andrew21 said:
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
Click to expand...
Click to collapse
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
yaro666 said:
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
Click to expand...
Click to collapse
Hello, when i go into download mode i get following info:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 0
RP SWREV:
ALso, i tried flashing 4 files with odin, i get following log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_OJV_N7100OJVDMB1_679347_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention i flashed only the folllowing pit file: PIT_N7100_16GB_20121102 with Odin3_v3.10.7 after which i get grey screen when i switch on the mobile, but i can still go into download mode....pleeeeaaasssee help
Also need to inform im using windows 10 but with correct drivers and connects with odin.
Cant anyone please help me...tried different roms and firmware still same problem...
I believe the eMMC chip has failed. The same happened to my phone and the service guy said i needed a new motherboard.
Some say it may also be a corrupted bootloader, which i have had no luck in fixing.
Wish i could help
It's ok thanks for informing me at least
Love to hear if you get it up and running again
I would love that too but don't have any solutions at the moment
So, my friend updated their S4 Mini GT-I9195 to Android version 4.4.2 Kitkat. The phone shut down twice after the update and is no longer able to boot up. So they gave me it to see what I can do. I've tried going to Odin mode, Recovery. But none of it works. I've also tried using QPST, but I'm unable to find .hex or .mbn file for it. So I tried the one for the required MSM8930 chipset. Sadly, the QPST cannot connect to my phone. Is there anything else I could do to revive it without having to JTAG it or something? Please help.
EDIT: I've managed to run it in Odin mode by using debrick.img flash into SD Card, however.. after trying to flash recovery. Odin returns:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any ideas?
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXXCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
try to flash with this firmware mate.
https://www.androidfilehost.com/?fid=24459283995298339
I will try but, anything what i try to flash dont work, i try to flash twrp its dont work its says this error..
It failed with same error
this is multifile frimware it should not fail did u tried to select pit from file as well?
Yes, i selected pit too
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> CP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_OJV_I9195OJVCNH1_2502401_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's it.
xRENAMEx said:
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
Click to expand...
Click to collapse
I had the sam Problem too...
It's a Hardware Problem (Motherboard)
Maybe you can buy an other used s4mini from eBay with working Motherboard and Exchange it.
Using Unofficial LineageOS 14.1 (v2awifi). During using my Tab Pro 12.2 SM-T900 I got a failure and switched off my tablet. Since that time I can't start my tablet. Can only turn on my tablet in downloadmode. Can't enter recovery. Tried to flash TWRP, but that is not possible. Because the failure was suddenly, I could not and can't switch and change usb-debugging and media-transfer possiblities.
I tried to install Stock Rom with Odin, got the next faillures:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And sometimes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
So I can't flash the stock rom for repairing my ROM. Please help me, so that I can use my tablet again. How to fix PIT-partion ?
I have the same problem. Any resolution?
Same but on an SM-T320. Flashed an appropriate PIT, stock firmware...nothing working. I'm thinking it's a physical issue at this point.