problem update 4.3 china N7100CHNEMK3 - Galaxy Note II Q&A, Help & Troubleshooting

Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution

Ary22m said:
Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution
Click to expand...
Click to collapse
What rom are you currently using?

deivid50 said:
What rom are you currently using?
Click to expand...
Click to collapse
Android 4.1.2 Jelly Bean

Try a different USB port and/or different PC.

thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Thank you dears
Thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Related

Note 2 will not boot and ODIN is having error when flashing ROM / PIT file

Please help... I have problem with ODIN and my phone will not boot. Below are the details of the error in ODIN.
PIT file: t03g_0907.pit
PDA: N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Come on did you try searching?
You are a victim of sds.
Look in the sds thread for more info.
Sent from my GT-N7100

help, no flash odin, i8160

Hello I can not flash the phone via ODIN. i8160
Tried many official firmware, single-file and multifile.
Tried to drop 2.3.6.
Phone does not boot on the logo (in recovery also comes)
Phone did not fall, just in the morning was not involved.
also tried this method http://forum.xda-developers.com/galaxy-ace/ace-2-help/galaxy-ace-2-recovery-mode-doesnt-t2788130
Please help.
Sorry for the English.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.img.md5
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

T mobile Samsung Galaxy S3 T999 stock rom error? please help ?

<ID:0/044> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUEOH1_T999TMBEOH1_T999UVUEOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/044> Odin v.3 engine (ID:44)..
<ID:0/044> File analysis..
<ID:0/044> SetupConnection..
<ID:0/044> Initialzation..
<ID:0/044> Get PIT for mapping..
<ID:0/044> Firmware update start..
<ID:0/044> sbl2.mbn
<ID:0/044> NAND Write Start!!
<ID:0/044> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I am trying to install 4.3 stock rom on this phone
Try different USB cables? Different USB port? Different versions of Odin?

Need help with rooting!

I am trying to root my phone with the help of this: http://forum.xda-developers.com/note-3-neo/general/recovery-root-root-lollipop-note-3-neo-t3265412/
I am stuck at Odin itself.
This is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried twice and same problem. What to do now?
PS. I'm a noob

SM-T900 can't install stock rom. Failure with Odin: there is no PIT partion

Using Unofficial LineageOS 14.1 (v2awifi). During using my Tab Pro 12.2 SM-T900 I got a failure and switched off my tablet. Since that time I can't start my tablet. Can only turn on my tablet in downloadmode. Can't enter recovery. Tried to flash TWRP, but that is not possible. Because the failure was suddenly, I could not and can't switch and change usb-debugging and media-transfer possiblities.
I tried to install Stock Rom with Odin, got the next faillures:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And sometimes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
So I can't flash the stock rom for repairing my ROM. Please help me, so that I can use my tablet again. How to fix PIT-partion ?
I have the same problem. Any resolution?
Same but on an SM-T320. Flashed an appropriate PIT, stock firmware...nothing working. I'm thinking it's a physical issue at this point.

Categories

Resources