I am trying to root my phone with the help of this: http://forum.xda-developers.com/note-3-neo/general/recovery-root-root-lollipop-note-3-neo-t3265412/
I am stuck at Odin itself.
This is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried twice and same problem. What to do now?
PS. I'm a noob
Related
Please help... I have problem with ODIN and my phone will not boot. Below are the details of the error in ODIN.
PIT file: t03g_0907.pit
PDA: N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Come on did you try searching?
You are a victim of sds.
Look in the sds thread for more info.
Sent from my GT-N7100
Hello I can not flash the phone via ODIN. i8160
Tried many official firmware, single-file and multifile.
Tried to drop 2.3.6.
Phone does not boot on the logo (in recovery also comes)
Phone did not fall, just in the morning was not involved.
also tried this method http://forum.xda-developers.com/galaxy-ace/ace-2-help/galaxy-ace-2-recovery-mode-doesnt-t2788130
Please help.
Sorry for the English.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.img.md5
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!
Hi All
my Samsung Note 2 , stuck on white screen so i cant boot into recovery or download mode.
please help me how to fix this.
ahmad83it said:
Hi All
my Samsung Note 2 , stuck on white screen so i cant boot into recovery or download mode.
please help me how to fix this.
Click to expand...
Click to collapse
Try to flash stock / custom rom using odin
i tried Odin it shows :-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
ahmad83it said:
i tried Odin it shows :-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
try THIS
or
THAT
if you can't get it to work, then maybe you have hardware issue with emmc
Hi,
I had flashed using Odin in the past. I have AT&T Note 10+ (SM-N970U). Can someone point me correct firmware to download? What could be the issue?
I screwed up big time. Please help!!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 8745 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> xbl_config.elf
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> devcfg.mbn
<ID:0/004> aop.mbn
<ID:0/004> bksecapp.mbn
<ID:0/004> cmnlib.mbn
<ID:0/004> cmnlib64.mbn
<ID:0/004> km4.mbn
<ID:0/004> qupv3fw.elf
<ID:0/004> sec.elf
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> storsec.mbn
<ID:0/004> uefi_sec.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Hi @EDlwin
As you can see in the link below, there is no AT&T specific firmware available.
https://www.sammobile.com/samsung/galaxy-note-10/firmware/#SM-N970U
I should suggest going with a flat USA one. You may, as well, wait to see if a fellow AT&T owner can guide you better than I've done.
Good luck.
.