<ID:0/044> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUEOH1_T999TMBEOH1_T999UVUEOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/044> Odin v.3 engine (ID:44)..
<ID:0/044> File analysis..
<ID:0/044> SetupConnection..
<ID:0/044> Initialzation..
<ID:0/044> Get PIT for mapping..
<ID:0/044> Firmware update start..
<ID:0/044> sbl2.mbn
<ID:0/044> NAND Write Start!!
<ID:0/044> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I am trying to install 4.3 stock rom on this phone
Try different USB cables? Different USB port? Different versions of Odin?
Related
Hello, XDA.
I'm having some trouble using Odin to flash my brand-new chinese I9082.
I successfuly flashed CWM Touch 6.0.3.6 with Odin 3.09 and I'm able to access CWM through PWR+VOL.UP+HOME anytime I want.
However, when I try to flash any other rom I could find online, I get problems when NAND writing.
My Odin screen says:
Code:
[FONT="Courier New"][COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9082I_VE
CUSTOM BIN DOWN: Yes (6 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Official[/FONT]
I've tried the following roms:
I9082ZNAMJ1_I9082CHUAMJ1_CHU (PDA only)
I9082XXUBMJ3_I9082ODDBMJ1_INS (PDA only)
I9082XXUBMGA_I9082XXUBMGA_SER (PDA only)
I9082XXUBMGA_I9082OXEBMGA_SER (PDA only)
I9082XXUBMF2_I9082OXABMF2_OXA (PDA, Modem, CSC, Boot and PIT)
During the first four attempts, I got the following Odin output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
During the last one (with all the files), I get the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when I try to boot my phone, I get stuck at the splash screen.
What else can I do to flash my phone?
Thank you very much!
Best regards.
Just do it again but before dat make check on re partioned. Hope i heled
Sent from my GT-S5282 using XDA Premium 4 mobile app
stephenkall said:
Hello, XDA.
I'm having some trouble using Odin to flash my brand-new chinese I9082.
I successfuly flashed CWM Touch 6.0.3.6 with Odin 3.09 and I'm able to access CWM through PWR+VOL.UP+HOME anytime I want.
However, when I try to flash any other rom I could find online, I get problems when NAND writing.
My Odin screen says:
Code:
[FONT="Courier New"][COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9082I_VE
CUSTOM BIN DOWN: Yes (6 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Official[/FONT]
I've tried the following roms:
I9082ZNAMJ1_I9082CHUAMJ1_CHU (PDA only)
I9082XXUBMJ3_I9082ODDBMJ1_INS (PDA only)
I9082XXUBMGA_I9082XXUBMGA_SER (PDA only)
I9082XXUBMGA_I9082OXEBMGA_SER (PDA only)
I9082XXUBMF2_I9082OXABMF2_OXA (PDA, Modem, CSC, Boot and PIT)
During the first four attempts, I got the following Odin output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
During the last one (with all the files), I get the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when I try to boot my phone, I get stuck at the splash screen.
What else can I do to flash my phone?
Thank you very much!
Best regards.
Click to expand...
Click to collapse
first boot in recovery and wipe data /reset and then flash the firmware and make sure that only auto reboot and f.reset time is ticked
rutvikrvr said:
first boot in recovery and wipe data /reset and then flash the firmware and make sure that only auto reboot and f.reset time is ticked
Click to expand...
Click to collapse
Thanks for your reply!
I did that. after that, with the chinese rom, I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I wiped everything again and tried to repartition with baffin PIT file. Got this output:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But whenever I try to flash the rom, I get this output:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
By the way, I tried in two different computers but I have the same results in both.
Is there anywhere I can download a different PIT file to try it?
stephenkall said:
Thanks for your reply!
I did that. after that, with the chinese rom, I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I wiped everything again and tried to repartition with baffin PIT file. Got this output:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But whenever I try to flash the rom, I get this output:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
By the way, I tried in two different computers but I have the same results in both.
Is there anywhere I can download a different PIT file to try it?
Click to expand...
Click to collapse
u dont need a pit file .....just uncheck repartition .........and make sure u do a data wipe before and after installing
rutvikrvr said:
u dont need a pit file .....just uncheck repartition .........and make sure u do a data wipe before and after installing
Click to expand...
Click to collapse
I only check re-partition when I'm using a pit file. The PDA-only roms didn't have "re-partition" checked but they also didn't work.
I'm guessing from the errors that my partition is somehow buggy, that's why I wanted another partition file (and I can't seem to find it anywhere).
http://www.4shared.com/file/Inh_xaXn/baffin.html here u go
rutvikrvr said:
http://www.4shared.com/file/Inh_xaXn/baffin.html here u go
Click to expand...
Click to collapse
stephenkall said:
I only check re-partition when I'm using a pit file. The PDA-only roms didn't have "re-partition" checked but they also didn't work.
I'm guessing from the errors that my partition is somehow buggy, that's why I wanted another partition file (and I can't seem to find it anywhere).
Click to expand...
Click to collapse
Thank you very much!
However, my problem looks persistent. After I repartitioned the cellphone with your file, I tried another rom and I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMGA_I9082OXEBMGA_I9082XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> vc-firmware.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I can see the beginning of the progress bar in odin screen.
which fw were u on 4.1.2 or 4.2.2??
rutvikrvr said:
which fw were u on 4.1.2 or 4.2.2??
Click to expand...
Click to collapse
I believe it was the stock chinese 4.1.2.
stephenkall said:
I believe it was the stock chinese 4.1.2.
Click to expand...
Click to collapse
Got it.
I was trying to flash I9082I with I9082 roms.
I downloaded one rom from a chinese website and it solved my problems.
Now I'm using:
Android 4.1.2
Firmware I9082iZNAMJ1
Kernel 3.0.31-1451271
Build JZO54K
Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution
Ary22m said:
Hi
plz help me
i have samsung galaxy note2 GT N-7100
i instill 4.3 china rom from sammobile.com
But i faced a problem i instilling rom with ODIN3 v3.09 and stooped download rom for mobile and not update .
Writing attached to explain what happened on the program ODIN3 v3.09
And where you stopped update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
can you help me and give me the right solution
Click to expand...
Click to collapse
What rom are you currently using?
deivid50 said:
What rom are you currently using?
Click to expand...
Click to collapse
Android 4.1.2 Jelly Bean
Try a different USB port and/or different PC.
thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you dears
Thank you dears , I changed pc and I used Odin (3.04 and 3.09) OS (Windows 8 & 7) .
The odin message is
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
hello i have dn4 rom on my note n7100 and i want update my bootloader to latest while i trying to update i gott this error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
and on the dwnloading mode
SW Rev Check Fail Device 2 Binary 1
anyone knows whats going wrong????
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXXCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
try to flash with this firmware mate.
https://www.androidfilehost.com/?fid=24459283995298339
I will try but, anything what i try to flash dont work, i try to flash twrp its dont work its says this error..
It failed with same error
this is multifile frimware it should not fail did u tried to select pit from file as well?
Yes, i selected pit too
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> CP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_OJV_I9195OJVCNH1_2502401_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's it.
xRENAMEx said:
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
Click to expand...
Click to collapse
I had the sam Problem too...
It's a Hardware Problem (Motherboard)
Maybe you can buy an other used s4mini from eBay with working Motherboard and Exchange it.
Using Unofficial LineageOS 14.1 (v2awifi). During using my Tab Pro 12.2 SM-T900 I got a failure and switched off my tablet. Since that time I can't start my tablet. Can only turn on my tablet in downloadmode. Can't enter recovery. Tried to flash TWRP, but that is not possible. Because the failure was suddenly, I could not and can't switch and change usb-debugging and media-transfer possiblities.
I tried to install Stock Rom with Odin, got the next faillures:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And sometimes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
So I can't flash the stock rom for repairing my ROM. Please help me, so that I can use my tablet again. How to fix PIT-partion ?
I have the same problem. Any resolution?
Same but on an SM-T320. Flashed an appropriate PIT, stock firmware...nothing working. I'm thinking it's a physical issue at this point.