So, my friend updated their S4 Mini GT-I9195 to Android version 4.4.2 Kitkat. The phone shut down twice after the update and is no longer able to boot up. So they gave me it to see what I can do. I've tried going to Odin mode, Recovery. But none of it works. I've also tried using QPST, but I'm unable to find .hex or .mbn file for it. So I tried the one for the required MSM8930 chipset. Sadly, the QPST cannot connect to my phone. Is there anything else I could do to revive it without having to JTAG it or something? Please help.
EDIT: I've managed to run it in Odin mode by using debrick.img flash into SD Card, however.. after trying to flash recovery. Odin returns:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any ideas?
Related
Hi Every body:
That is really a bad day, just woke up this morning to find my device (was plugged for charging over night) to find it stuck at (GALAXY NOTE II N-7100)
tried several times to pull the battery and put it back hopefully to get it boot...but nothing happened.
I can access only the download mood and NO access to the custom recovery!!
I was running Android 4.1.1 WITH ROOT!
As advised in many other posts, tried to update to 4.1.2 using odin but the whole process failed with the following log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas and suggestions will be really appreciated.
Samsung maintenance in my place may take forever to get it fixed (almost 2 weeks!!)
Use odin 1.85 , check samsung usb drivers installed , exit kies, disable antivirus and firewall and try..
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Primokorn said:
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Click to expand...
Click to collapse
Thanks for the reply, really appreciate it..
I changed the USB port and got the following log from odin:
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
drsayed_958 said:
Any ideas?
Click to expand...
Click to collapse
Did u try another Odin version? 1.85 or 3.04
Primokorn said:
Did u try another Odin version? 1.85 or 3.04
Click to expand...
Click to collapse
Tried both, got the same result.:crying:
You can flash with pit in Odin, it should work. The pit file can be found around here somewhere, can't find it for you right now.
Sent from my GT-N7100 using Tapatalk 2
http://forum.xda-developers.com/showpost.php?p=32273406
Not sure that it solves your issue.
same problem can anyone help ? no pit partition , or Can't open the serial(COM) port. , all drivers are installed i installed kies for driver the uninstalled without drivers
Hi
When upgrading firmware with kies,I lost partition information on SGH-M919 S4.
right now, I guess my S4 is soft bricked. all i can do is put phone in download mode , i tried with all the .tar files for the model none of them had pit file in it. below is the odin error. If any one can help me by extracting pit file from their phone and post it , I will be thankful.
Below are the odin errors, i am getting
######
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/020> Removed!!
<ID:0/020> Added!!
###
I connected S4 directly to pc , no Hub in between.
Below is the link to , how to extract pit file
http://forum.xda-developers.com/showthread.php?t=2582899
Thanks
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
andrew21 said:
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
Click to expand...
Click to collapse
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
yaro666 said:
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
Click to expand...
Click to collapse
Hello, when i go into download mode i get following info:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 0
RP SWREV:
ALso, i tried flashing 4 files with odin, i get following log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_OJV_N7100OJVDMB1_679347_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention i flashed only the folllowing pit file: PIT_N7100_16GB_20121102 with Odin3_v3.10.7 after which i get grey screen when i switch on the mobile, but i can still go into download mode....pleeeeaaasssee help
Also need to inform im using windows 10 but with correct drivers and connects with odin.
Cant anyone please help me...tried different roms and firmware still same problem...
I believe the eMMC chip has failed. The same happened to my phone and the service guy said i needed a new motherboard.
Some say it may also be a corrupted bootloader, which i have had no luck in fixing.
Wish i could help
It's ok thanks for informing me at least
Love to hear if you get it up and running again
I would love that too but don't have any solutions at the moment
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXXCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
try to flash with this firmware mate.
https://www.androidfilehost.com/?fid=24459283995298339
I will try but, anything what i try to flash dont work, i try to flash twrp its dont work its says this error..
It failed with same error
this is multifile frimware it should not fail did u tried to select pit from file as well?
Yes, i selected pit too
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> CP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_OJV_I9195OJVCNH1_2502401_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's it.
xRENAMEx said:
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
Click to expand...
Click to collapse
I had the sam Problem too...
It's a Hardware Problem (Motherboard)
Maybe you can buy an other used s4mini from eBay with working Motherboard and Exchange it.
This morning I flashed Lineage 14.1 and there were no errors. But it got stuck at the Samsung logo during reboot. I waited about 15 minutes. I could not figure out how to fix it so I decided to flash the stock firmware using Odin. It passed but also got stuck at the same screen during reboot. Then I did a hard system recovery but still could not boot past the Samsung logo. After that I install Samsung Kies 3, but it said the phone is no longer supported. Then I tried Kies 2.6 but it said the phone SGH-M919 does not support initialization. Now I can't get to the system recovery screen anymore. It would say there is an issue with the firmware update and try again in Kies. I cannot flash the stock firmware in Odin anymore either. It would fail with a complete write error. I don't know what else to try. Please help me.
Did you confirm the phone's model # in download mode?
You tried different USB cables, different USB ports, and different versions of Odin?
What was the exact Odin error?
Yes, the model is correct SGH-M919. I've tried Odin 3.0.7 and 3.10.6. I used Odin 3.0.7 to root and install TWRP recovery using the same original Samsung USB cable. So the cable and port should be OK. I tried it again this morning and noticed it took a long time after the message "Get PIT for mapping.."
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOK3_M919TMBFOK3_M919UVUFOK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried it again using a different USB port and this time it failed right away. I didn't see the line "Get PIT for mapping" this time. Here are the messages in Odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOK3_M919TMBFOK3_M919UVUFOK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I was using the USB ports at the front of the PC and none of them worked. I tried one port at the back and it worked. Thank you very much. I never thought this would make a difference because I use the ports in the front all the time with my other iPhones, iPads, USB memory sticks and never had a problem. I lost all my data on the phone but that's OK. I would not dare to install custom ROM again. It looked so easy in youtube videos. Thanks again.
Glad you got it working. I always use the ports at the back of my desktop because I find it more reliable than the front case ports.