Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
andrew21 said:
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
Click to expand...
Click to collapse
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
yaro666 said:
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
Click to expand...
Click to collapse
Hello, when i go into download mode i get following info:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 0
RP SWREV:
ALso, i tried flashing 4 files with odin, i get following log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_OJV_N7100OJVDMB1_679347_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention i flashed only the folllowing pit file: PIT_N7100_16GB_20121102 with Odin3_v3.10.7 after which i get grey screen when i switch on the mobile, but i can still go into download mode....pleeeeaaasssee help
Also need to inform im using windows 10 but with correct drivers and connects with odin.
Cant anyone please help me...tried different roms and firmware still same problem...
I believe the eMMC chip has failed. The same happened to my phone and the service guy said i needed a new motherboard.
Some say it may also be a corrupted bootloader, which i have had no luck in fixing.
Wish i could help
It's ok thanks for informing me at least
Love to hear if you get it up and running again
I would love that too but don't have any solutions at the moment
Related
Please help... I have problem with ODIN and my phone will not boot. Below are the details of the error in ODIN.
PIT file: t03g_0907.pit
PDA: N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Come on did you try searching?
You are a victim of sds.
Look in the sds thread for more info.
Sent from my GT-N7100
Every time I try to install CF-Auto root I get this. What I don't under stand is that I just used Odin to install I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 to return to stock ..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
stealitall said:
Every time I try to install CF-Auto root I get this. What I don't under stand is that I just used Odin to install I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 to return to stock ..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try towelroot to root it. I used it on my tablet, and no PC required, everything is done right from the tablet itself...
Thanks a lot!! That seemed to work. Know if I found figure out how to install DE-SAMSUNGNIZER Script V5.2. I would be good lol.
stealitall said:
Thanks a lot!! That seemed to work. Know if I found figure out how to install DE-SAMSUNGNIZER Script V5.2. I would be good lol.
Click to expand...
Click to collapse
Not sure exactly what that particular script does, but just from the name alone, sounds like it might be a bloatware remover? Should be able to do that with just root privileges alone.....
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!
so i just want to tell you what all happened exactly..
my phone was kept on charging and after i unplugged it .. it did not start..
so i tried researching and find out solutions..
one possible solution i found out was to flash the STOCK FIRMWARE using ODIN..
but when i entered the download mode and i started flashing the stock firmware i am facing this issue
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
need HELP ON HOW TO FIX THIS PROBLEM :| :crying:
Did you try different USB cables and USB ports?
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXXCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
try to flash with this firmware mate.
https://www.androidfilehost.com/?fid=24459283995298339
I will try but, anything what i try to flash dont work, i try to flash twrp its dont work its says this error..
It failed with same error
this is multifile frimware it should not fail did u tried to select pit from file as well?
Yes, i selected pit too
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> CP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_OJV_I9195OJVCNH1_2502401_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's it.
xRENAMEx said:
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
Click to expand...
Click to collapse
I had the sam Problem too...
It's a Hardware Problem (Motherboard)
Maybe you can buy an other used s4mini from eBay with working Motherboard and Exchange it.