get pit for mapping issue in gt-n7100 - Galaxy Note II Q&A, Help & Troubleshooting

get pit for mapping issue in gt-n7100 - Galaxy Note II Q&A, Help & Troubleshooting

so i just want to tell you what all happened exactly..
my phone was kept on charging and after i unplugged it .. it did not start..
so i tried researching and find out solutions..
one possible solution i found out was to flash the STOCK FIRMWARE using ODIN..
but when i entered the download mode and i started flashing the stock firmware i am facing this issue
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
need HELP ON HOW TO FIX THIS PROBLEM :| :crying:

Did you try different USB cables and USB ports?

Related

[Q] Problems flashing I9082 with any ROM

Hello, XDA.
I'm having some trouble using Odin to flash my brand-new chinese I9082.
I successfuly flashed CWM Touch 6.0.3.6 with Odin 3.09 and I'm able to access CWM through PWR+VOL.UP+HOME anytime I want.
However, when I try to flash any other rom I could find online, I get problems when NAND writing.
My Odin screen says:
Code:
[FONT="Courier New"][COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9082I_VE
CUSTOM BIN DOWN: Yes (6 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Official[/FONT]
I've tried the following roms:
I9082ZNAMJ1_I9082CHUAMJ1_CHU (PDA only)
I9082XXUBMJ3_I9082ODDBMJ1_INS (PDA only)
I9082XXUBMGA_I9082XXUBMGA_SER (PDA only)
I9082XXUBMGA_I9082OXEBMGA_SER (PDA only)
I9082XXUBMF2_I9082OXABMF2_OXA (PDA, Modem, CSC, Boot and PIT)
During the first four attempts, I got the following Odin output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
During the last one (with all the files), I get the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when I try to boot my phone, I get stuck at the splash screen.
What else can I do to flash my phone?
Thank you very much!
Best regards.

Just do it again but before dat make check on re partioned. Hope i heled
Sent from my GT-S5282 using XDA Premium 4 mobile app

stephenkall said:
Hello, XDA.
I'm having some trouble using Odin to flash my brand-new chinese I9082.
I successfuly flashed CWM Touch 6.0.3.6 with Odin 3.09 and I'm able to access CWM through PWR+VOL.UP+HOME anytime I want.
However, when I try to flash any other rom I could find online, I get problems when NAND writing.
My Odin screen says:
Code:
[FONT="Courier New"][COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9082I_VE
CUSTOM BIN DOWN: Yes (6 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Official[/FONT]
I've tried the following roms:
I9082ZNAMJ1_I9082CHUAMJ1_CHU (PDA only)
I9082XXUBMJ3_I9082ODDBMJ1_INS (PDA only)
I9082XXUBMGA_I9082XXUBMGA_SER (PDA only)
I9082XXUBMGA_I9082OXEBMGA_SER (PDA only)
I9082XXUBMF2_I9082OXABMF2_OXA (PDA, Modem, CSC, Boot and PIT)
During the first four attempts, I got the following Odin output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
During the last one (with all the files), I get the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when I try to boot my phone, I get stuck at the splash screen.
What else can I do to flash my phone?
Thank you very much!
Best regards.
Click to expand...
Click to collapse
first boot in recovery and wipe data /reset and then flash the firmware and make sure that only auto reboot and f.reset time is ticked

rutvikrvr said:
first boot in recovery and wipe data /reset and then flash the firmware and make sure that only auto reboot and f.reset time is ticked
Click to expand...
Click to collapse
Thanks for your reply!
I did that. after that, with the chinese rom, I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I wiped everything again and tried to repartition with baffin PIT file. Got this output:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But whenever I try to flash the rom, I get this output:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
By the way, I tried in two different computers but I have the same results in both.
Is there anywhere I can download a different PIT file to try it?

stephenkall said:
Thanks for your reply!
I did that. after that, with the chinese rom, I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082ZNAMJ1_I9082CHUAMJ1_I9082ZNAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I wiped everything again and tried to repartition with baffin PIT file. Got this output:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But whenever I try to flash the rom, I get this output:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9082XXUBMF2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
By the way, I tried in two different computers but I have the same results in both.
Is there anywhere I can download a different PIT file to try it?
Click to expand...
Click to collapse
u dont need a pit file .....just uncheck repartition .........and make sure u do a data wipe before and after installing

rutvikrvr said:
u dont need a pit file .....just uncheck repartition .........and make sure u do a data wipe before and after installing
Click to expand...
Click to collapse
I only check re-partition when I'm using a pit file. The PDA-only roms didn't have "re-partition" checked but they also didn't work.
I'm guessing from the errors that my partition is somehow buggy, that's why I wanted another partition file (and I can't seem to find it anywhere).

http://www.4shared.com/file/Inh_xaXn/baffin.html here u go

rutvikrvr said:
http://www.4shared.com/file/Inh_xaXn/baffin.html here u go
Click to expand...
Click to collapse
stephenkall said:
I only check re-partition when I'm using a pit file. The PDA-only roms didn't have "re-partition" checked but they also didn't work.
I'm guessing from the errors that my partition is somehow buggy, that's why I wanted another partition file (and I can't seem to find it anywhere).
Click to expand...
Click to collapse
Thank you very much!
However, my problem looks persistent. After I repartitioned the cellphone with your file, I tried another rom and I got the following output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMGA_I9082OXEBMGA_I9082XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> vc-firmware.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I can see the beginning of the progress bar in odin screen.

which fw were u on 4.1.2 or 4.2.2??

rutvikrvr said:
which fw were u on 4.1.2 or 4.2.2??
Click to expand...
Click to collapse
I believe it was the stock chinese 4.1.2.

stephenkall said:
I believe it was the stock chinese 4.1.2.
Click to expand...
Click to collapse
Got it.
I was trying to flash I9082I with I9082 roms.
I downloaded one rom from a chinese website and it solved my problems.
Now I'm using:
Android 4.1.2
Firmware I9082iZNAMJ1
Kernel 3.0.31-1451271
Build JZO54K

[Q] Note 2 GT-N7100 stuck at samsung logo

I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......

coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.

nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!

Note 2 (N7100) stuck on white screen

Hi All
my Samsung Note 2 , stuck on white screen so i cant boot into recovery or download mode.
please help me how to fix this.

ahmad83it said:
Hi All
my Samsung Note 2 , stuck on white screen so i cant boot into recovery or download mode.
please help me how to fix this.
Click to expand...
Click to collapse
Try to flash stock / custom rom using odin

i tried Odin it shows :-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

ahmad83it said:
i tried Odin it shows :-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
try THIS
or
THAT
if you can't get it to work, then maybe you have hardware issue with emmc

SM-T900 can't install stock rom. Failure with Odin: there is no PIT partion

Using Unofficial LineageOS 14.1 (v2awifi). During using my Tab Pro 12.2 SM-T900 I got a failure and switched off my tablet. Since that time I can't start my tablet. Can only turn on my tablet in downloadmode. Can't enter recovery. Tried to flash TWRP, but that is not possible. Because the failure was suddenly, I could not and can't switch and change usb-debugging and media-transfer possiblities.
I tried to install Stock Rom with Odin, got the next faillures:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And sometimes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
So I can't flash the stock rom for repairing my ROM. Please help me, so that I can use my tablet again. How to fix PIT-partion ?

I have the same problem. Any resolution?

Same but on an SM-T320. Flashed an appropriate PIT, stock firmware...nothing working. I'm thinking it's a physical issue at this point.

anything I can do with a broken SM-T900 wifi ?

More than half a year ago my SM-T900 came in a Samsung logo bootloop. It lies useless on a bookshelve. Tried everything to repair. Only can come in download-mode. Probably the EMMC is broken. This is fixed on the mainboard. Mainboards for this tablet are not any more for sale.
Last try using ODIN got the next messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I can do with this tablet ?

Develop Bugs

welcome

get pit for mapping issue in gt-n7100 - Galaxy Note II Q&A, Help & Troubleshooting

Did you try different USB cables and USB ports?

Related

[Q] Problems flashing I9082 with any ROM

[Q] Note 2 GT-N7100 stuck at samsung logo

Note 2 (N7100) stuck on white screen

SM-T900 can't install stock rom. Failure with Odin: there is no PIT partion

anything I can do with a broken SM-T900 wifi ?

Categories

Resources