[Q] Stuck on boot screen - Galaxy Note II Q&A, Help & Troubleshooting

Hi guys, am sorry if this is a repeat post I've been looking for a solution but haven't found one. So my note II was on my desk when it suddenly rebooted, but now its stuck on the Smasung GALAXY Note II GT-N7100 screen. Holding the Vol up + home + power buttons does nothing but reboot and take me back to the stuck screen. I can though reach the download mode with vol down + home + power, my phone is rooted. Any help would be appreciated thanks in advance.
PS: Sorry if bad grammar english is not my 1st language

meanbluepanda said:
Hi guys, am sorry if this is a repeat post I've been looking for a solution but haven't found one. So my note II was on my desk when it suddenly rebooted, but now its stuck on the Smasung GALAXY Note II GT-N7100 screen. Holding the Vol up + home + power buttons does nothing but reboot and take me back to the stuck screen. I can though reach the download mode with vol down + home + power, my phone is rooted. Any help would be appreciated thanks in advance.
PS: Sorry if bad grammar english is not my 1st language
Click to expand...
Click to collapse
Only option is to Flash stock firmware via ODIN.
Sent from my GT-N7100 using Tapatalk

108
ceomaverick said:
Only option is to Flash stock firmware via ODIN.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I tried to flash the 4.4.2 kitkat firmware and got this in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100VFGFNE2_N7100BUUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: Now after posting this it tells me USB unrecognized, I have tried installing the samsung drivers, but they're not working.

meanbluepanda said:
I tried to flash the 4.4.2 kitkat firmware and got this in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100VFGFNE2_N7100BUUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: Now after posting this it tells me USB unrecognized, I have tried installing the samsung drivers, but they're not working.
Click to expand...
Click to collapse
Well, if u cant connect to PC. Not much can be done. If somehow u connect, get a pit file for your device and flash it.
Sent from my GT-N7100 using Tapatalk

Related

HELP !!! with note 2 odin recovery

hi i'm new on the forum ... i hope i can post this here .. i need help with a note 2 i just got it and and when i start it it doesn't make any sound just comes a white screen wit point and lines .. first i fote its something wrong wit the screen or the graphic ...if i hold volume down +power+home i can access odin mode and the computer recognise that something its connected to it .. i got the usb drivers , odin3.07 and recovery file (CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5) i folow the steps to install ...<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
on the thread it was saying that the md5 file doesn't need a PIT file ... odin was asking for one so i got one for gt-n7100 ..

[Q] My note II won't boot

Hi Every body:
That is really a bad day, just woke up this morning to find my device (was plugged for charging over night) to find it stuck at (GALAXY NOTE II N-7100)
tried several times to pull the battery and put it back hopefully to get it boot...but nothing happened.
I can access only the download mood and NO access to the custom recovery!!
I was running Android 4.1.1 WITH ROOT!
As advised in many other posts, tried to update to 4.1.2 using odin but the whole process failed with the following log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas and suggestions will be really appreciated.
Samsung maintenance in my place may take forever to get it fixed (almost 2 weeks!!)
Use odin 1.85 , check samsung usb drivers installed , exit kies, disable antivirus and firewall and try..
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Primokorn said:
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Click to expand...
Click to collapse
Thanks for the reply, really appreciate it..
I changed the USB port and got the following log from odin:
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
drsayed_958 said:
Any ideas?
Click to expand...
Click to collapse
Did u try another Odin version? 1.85 or 3.04
Primokorn said:
Did u try another Odin version? 1.85 or 3.04
Click to expand...
Click to collapse
Tried both, got the same result.:crying:
You can flash with pit in Odin, it should work. The pit file can be found around here somewhere, can't find it for you right now.
Sent from my GT-N7100 using Tapatalk 2
http://forum.xda-developers.com/showpost.php?p=32273406
Not sure that it solves your issue.
same problem can anyone help ? no pit partition , or Can't open the serial(COM) port. , all drivers are installed i installed kies for driver the uninstalled without drivers

[Q] Sprint Note II Bricked, HELP!!!

I have had my Note II before it was even released in the US, Thank you Samsung but it has been on the Samsung Screen for 3 days and Im losing it slowing with trying everything on different post and different videos with the same result. Grrrrrrr I used Galaxy Note II toolkit when it became available and was the easiest root ever. Didnt do anything extreme or make any changes other than root for hotspot. All of a sudden a year later it powers off one night and I woke to the samsung screen of hell. I popped out the battery and reinserted but to my dismay in the morning, samsung screen again. I have downloaded SPH-L900_MA7_Rooted_Nodata.tar, SPH-L900_MA7_Stock_Nodata.tar and L900VPUBMK4_L900SPTBMK4_HOME.tar. Im using Odin v3.07 and I get FAILED everytime no matter which .tar i use !! The message I get is " There is no PIT Partition" . I have been using xda for years being was always receiving free phones due to my old career but this situation has me stumped so I am officially a noob today. Please Help!!!! What am I dont wrong?
Odin OneClick Fail
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
kevo7000 said:
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just ran into the same problem with my brothers phone, now I am trying to restore it

Need to repair n7100 stuck on grey screen

Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
andrew21 said:
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
Click to expand...
Click to collapse
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
yaro666 said:
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
Click to expand...
Click to collapse
Hello, when i go into download mode i get following info:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 0
RP SWREV:
ALso, i tried flashing 4 files with odin, i get following log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_OJV_N7100OJVDMB1_679347_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention i flashed only the folllowing pit file: PIT_N7100_16GB_20121102 with Odin3_v3.10.7 after which i get grey screen when i switch on the mobile, but i can still go into download mode....pleeeeaaasssee help
Also need to inform im using windows 10 but with correct drivers and connects with odin.
Cant anyone please help me...tried different roms and firmware still same problem...
I believe the eMMC chip has failed. The same happened to my phone and the service guy said i needed a new motherboard.
Some say it may also be a corrupted bootloader, which i have had no luck in fixing.
Wish i could help
It's ok thanks for informing me at least
Love to hear if you get it up and running again
I would love that too but don't have any solutions at the moment

Help with Verixon Galaxy Note 2 (US)

I have googled everything I can think of, plus some things I've learned along the way and I am still out of luck. My phone was stock unrooted w/ all OTAs. One day ir just locked up. When I ried to reboot...nothing. Did battery pull...stuck at Samsung logo. I tried wiping the cache, and tried a complete wipe and reboot...still sticks at Samsung logo. I've learned about odin...used 1.85 and 1.07. I've tried to flash all of the following:
I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5, CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5, \I605VRUFND7_I605VZWFND7_I605VRUFND7_HOME.tar.md5, I605_VRAMC3_RESTORE.tar.md5, BootloaderBaseline2.tar.md5, recovery.tar with and without this pit: sch-i605-16gb.pit. They have all failed. Here is the Message from the last one from the I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left all parameters the way they were. Here is a link to the screenshot after it completed: poolmasterb.com/odin.png
Any ideas??? TIA!!!!
Uncheck Re-Partition and try again
Sent from my GT-N5100 using XDA-Developers mobile app
Are you using the original Samsung USB cable? Have you tried other USB cables and USB ports?

Categories

Resources