I have googled everything I can think of, plus some things I've learned along the way and I am still out of luck. My phone was stock unrooted w/ all OTAs. One day ir just locked up. When I ried to reboot...nothing. Did battery pull...stuck at Samsung logo. I tried wiping the cache, and tried a complete wipe and reboot...still sticks at Samsung logo. I've learned about odin...used 1.85 and 1.07. I've tried to flash all of the following:
I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5, CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5, \I605VRUFND7_I605VZWFND7_I605VRUFND7_HOME.tar.md5, I605_VRAMC3_RESTORE.tar.md5, BootloaderBaseline2.tar.md5, recovery.tar with and without this pit: sch-i605-16gb.pit. They have all failed. Here is the Message from the last one from the I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left all parameters the way they were. Here is a link to the screenshot after it completed: poolmasterb.com/odin.png
Any ideas??? TIA!!!!
Uncheck Re-Partition and try again
Sent from my GT-N5100 using XDA-Developers mobile app
Are you using the original Samsung USB cable? Have you tried other USB cables and USB ports?
Related
Hello all,
I'm trying to return my Bell s3 (i747M) and I'm trying to flash the bell the bell stock rom. I'm using odin but nothing is actually flashing. This is all I see
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried 2 different files on two different computers, any ideas?
Hi
Try to reinstall your drivers.
http://forum.xda-developers.com/showthread.php?t=1903516
Well I'm a bit of an idiot, new pc build and forgot about drivers. Also followed those connection issues and it worked just fine!
hi i'm new on the forum ... i hope i can post this here .. i need help with a note 2 i just got it and and when i start it it doesn't make any sound just comes a white screen wit point and lines .. first i fote its something wrong wit the screen or the graphic ...if i hold volume down +power+home i can access odin mode and the computer recognise that something its connected to it .. i got the usb drivers , odin3.07 and recovery file (CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5) i folow the steps to install ...<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
on the thread it was saying that the md5 file doesn't need a PIT file ... odin was asking for one so i got one for gt-n7100 ..
I have had my Note II before it was even released in the US, Thank you Samsung but it has been on the Samsung Screen for 3 days and Im losing it slowing with trying everything on different post and different videos with the same result. Grrrrrrr I used Galaxy Note II toolkit when it became available and was the easiest root ever. Didnt do anything extreme or make any changes other than root for hotspot. All of a sudden a year later it powers off one night and I woke to the samsung screen of hell. I popped out the battery and reinserted but to my dismay in the morning, samsung screen again. I have downloaded SPH-L900_MA7_Rooted_Nodata.tar, SPH-L900_MA7_Stock_Nodata.tar and L900VPUBMK4_L900SPTBMK4_HOME.tar. Im using Odin v3.07 and I get FAILED everytime no matter which .tar i use !! The message I get is " There is no PIT Partition" . I have been using xda for years being was always receiving free phones due to my old career but this situation has me stumped so I am officially a noob today. Please Help!!!! What am I dont wrong?
Odin OneClick Fail
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
kevo7000 said:
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just ran into the same problem with my brothers phone, now I am trying to restore it
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!
This morning I flashed Lineage 14.1 and there were no errors. But it got stuck at the Samsung logo during reboot. I waited about 15 minutes. I could not figure out how to fix it so I decided to flash the stock firmware using Odin. It passed but also got stuck at the same screen during reboot. Then I did a hard system recovery but still could not boot past the Samsung logo. After that I install Samsung Kies 3, but it said the phone is no longer supported. Then I tried Kies 2.6 but it said the phone SGH-M919 does not support initialization. Now I can't get to the system recovery screen anymore. It would say there is an issue with the firmware update and try again in Kies. I cannot flash the stock firmware in Odin anymore either. It would fail with a complete write error. I don't know what else to try. Please help me.
Did you confirm the phone's model # in download mode?
You tried different USB cables, different USB ports, and different versions of Odin?
What was the exact Odin error?
Yes, the model is correct SGH-M919. I've tried Odin 3.0.7 and 3.10.6. I used Odin 3.0.7 to root and install TWRP recovery using the same original Samsung USB cable. So the cable and port should be OK. I tried it again this morning and noticed it took a long time after the message "Get PIT for mapping.."
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOK3_M919TMBFOK3_M919UVUFOK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried it again using a different USB port and this time it failed right away. I didn't see the line "Get PIT for mapping" this time. Here are the messages in Odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOK3_M919TMBFOK3_M919UVUFOK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I was using the USB ports at the front of the PC and none of them worked. I tried one port at the back and it worked. Thank you very much. I never thought this would make a difference because I use the ports in the front all the time with my other iPhones, iPads, USB memory sticks and never had a problem. I lost all my data on the phone but that's OK. I would not dare to install custom ROM again. It looked so easy in youtube videos. Thanks again.
Glad you got it working. I always use the ports at the back of my desktop because I find it more reliable than the front case ports.