I have had my Note II before it was even released in the US, Thank you Samsung but it has been on the Samsung Screen for 3 days and Im losing it slowing with trying everything on different post and different videos with the same result. Grrrrrrr I used Galaxy Note II toolkit when it became available and was the easiest root ever. Didnt do anything extreme or make any changes other than root for hotspot. All of a sudden a year later it powers off one night and I woke to the samsung screen of hell. I popped out the battery and reinserted but to my dismay in the morning, samsung screen again. I have downloaded SPH-L900_MA7_Rooted_Nodata.tar, SPH-L900_MA7_Stock_Nodata.tar and L900VPUBMK4_L900SPTBMK4_HOME.tar. Im using Odin v3.07 and I get FAILED everytime no matter which .tar i use !! The message I get is " There is no PIT Partition" . I have been using xda for years being was always receiving free phones due to my old career but this situation has me stumped so I am officially a noob today. Please Help!!!! What am I dont wrong?
Odin OneClick Fail
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
kevo7000 said:
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just ran into the same problem with my brothers phone, now I am trying to restore it
Related
I tried searching but can't seem to find anything that solves this issue.
I had the device about 2 hrs before jumping into rooting. I think I went a little overboard. I tried flashing the CF Autoroot via ODIN. Afterwards, I used CASUAL. That was successful. However, when I attempted to flash the unsecured boot image it failed. Now I can't do anything but get into DL mode.
I've familiar with ODIN since I had a Charge. But I may have jumped in too early too root this phone. Coming from a Galaxy Nexus it's just not as simple - HA!
Anyways, I would be much appreciated if anyone can assist. I believe I need to flash a secured boot image. I don't think the phone was ever unlocked but I have no way of knowing for sure. It will not boot. It gives me the "firmware upgrade was unsuccessful" page. I get the same if I try to charge when the phone is off.
Help please! TIA.
EDIT: This is what I get when I try to flash the CF auto in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
OH I think I fixed it.
This is pW!
hi i'm new on the forum ... i hope i can post this here .. i need help with a note 2 i just got it and and when i start it it doesn't make any sound just comes a white screen wit point and lines .. first i fote its something wrong wit the screen or the graphic ...if i hold volume down +power+home i can access odin mode and the computer recognise that something its connected to it .. i got the usb drivers , odin3.07 and recovery file (CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5) i folow the steps to install ...<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
on the thread it was saying that the md5 file doesn't need a PIT file ... odin was asking for one so i got one for gt-n7100 ..
I think im soft bricked and ******up pit. I can only flash recovery and it succes only randomly... Battery isnt loading and screen flashes like its going on/off really fast.
When im trying to flash stock rom from sammobile.com it fails with error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Wow im so blind
Accidentally downloaded n5100 when i have n5110... but it wont even then work. atm trying to install cm trough recovery but it stucks at installing update and suddenly boots to note 8 logo and sits there :crying: wiping data says error "Error mounting /data!" is that problem? Ofcourse its error so its problem but how huge problem is that?
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!
I have googled everything I can think of, plus some things I've learned along the way and I am still out of luck. My phone was stock unrooted w/ all OTAs. One day ir just locked up. When I ried to reboot...nothing. Did battery pull...stuck at Samsung logo. I tried wiping the cache, and tried a complete wipe and reboot...still sticks at Samsung logo. I've learned about odin...used 1.85 and 1.07. I've tried to flash all of the following:
I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5, CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5, \I605VRUFND7_I605VZWFND7_I605VRUFND7_HOME.tar.md5, I605_VRAMC3_RESTORE.tar.md5, BootloaderBaseline2.tar.md5, recovery.tar with and without this pit: sch-i605-16gb.pit. They have all failed. Here is the Message from the last one from the I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left all parameters the way they were. Here is a link to the screenshot after it completed: poolmasterb.com/odin.png
Any ideas??? TIA!!!!
Uncheck Re-Partition and try again
Sent from my GT-N5100 using XDA-Developers mobile app
Are you using the original Samsung USB cable? Have you tried other USB cables and USB ports?