Develop Bugs

[Q] Please ! Urgent Help. ARC keep rebooting :(

Hi guys,
I rooted my device today actually. And did many customising. It was all good until half a hour ago.
I Uploaded my frameware-res.apk and SystemUI.apk to UOT Kitchen. Made Window animation Bounce. Download cooked file, copyed to system. Gave permission and moved to right folders (SystemUI.apk to system/app , framework-res.apk to system/framework) .. Than rebooted and it is still rebooting. It is just keep rebooting it self. I can see "Sony Ericsson" title and boot animation. After boot animation it reboot itself I tried to flash it but it says " Open your phone and Enable USB debugging" but i can't do it What can i do now ? Please someone help
Is there anyway to change files (files in root like framework-res.apk etc.) in Phone without opening it. Or maybe via PC with any program?
I also tried PC Companion it can see the phone connected, but when i try to Update (for restore option). It says Open your phone and connect it to PC.
Please guys someone help me
Thank you for reading.
Best Regards.

Search for SEUS (Sony Ericsson Update Service) and repair using that instead (don't need phone to be on for that to work).
oojjii said:
Hi guys,
I rooted my device today actually. And did many customising. It was all good until half a hour ago.
I Uploaded my frameware-res.apk and SystemUI.apk to UOT Kitchen. Made Window animation Bounce. Download cooked file, copyed to system. Gave permission and moved to right folders (SystemUI.apk to system/app , framework-res.apk to system/framework) .. Than rebooted and it is still rebooting. It is just keep rebooting it self. I can see "Sony Ericsson" title and boot animation. After boot animation it reboot itself I tried to flash it but it says " Open your phone and Enable USB debugging" but i can't do it What can i do now ? Please someone help
Is there anyway to change files (files in root like framework-res.apk etc.) in Phone without opening it. Or maybe via PC with any program?
I also tried PC Companion it can see the phone connected, but when i try to Update (for restore option). It says Open your phone and connect it to PC.
Please guys someone help me
Thank you for reading.
Best Regards.
Click to expand...
Click to collapse

Oh thank God !
When phone is not connected. In SE PC Companion's Support Zone, repair your phone button appeared. I clicked it and connected phone to PC in Flashmode. Than it flashed .42 Build Number Firmware. Oh. OMG im so relaxed right now. For a moment, i thought i lost my phone completely
Thank you so much so much for this bro
I wish you all the best.
Best regards.

and try to avoid framework, and any other system file

Yes, it is dangerous. But i don't care bro
This is why i rooted my phone. It feels so good, freedom.
I'm gonna be little more careful now
Thank you

[Q] Would like help-problems after JB update

incoming wall of text:
I have an xperia S. It had the international/generic ICS on it and i was very happy with it...(im in the UK on giffgaff and this seems to be the best for me)
a few days ago on a pc forum i read that sony had finally released JB for my handset, there was some arguing because it didnt show up when trying an OTA update but the advice was to plug the handset into a pc and use the sony update companion program.
I went through the process to update to JB using this method but when told to reconnect the phone my pc bluescreened; in total it bluescreened 5 times on the trot and my phone seemed to be 'in limbo'.
realising from the stop message in windows my rear usb 3 ports were the problem i plugged the xperia into the 'normal' front usb 2 port and tried it again- this time the process completed and i thought that all was well.
of course all is not well but im hoping its easy enough to fix. The problem is i randomly dont get any notification sounds.no whatsapp,calls,texts, twitter mentions... nothing; then i get home and take the phone out of my pocket and the led is flashing and i see i have missed messages etc.
so my question is how to fix it, but also is there kind of a way to ..... format it.. so i have a clean slate ?? Im going to assume at some point i will need to flash it with..something; what if anything will i lose (and therefore need to backup) will i be able to save things like my poweramp prefs and playlists ??
thankyou for any help, i have tried to include everything i feel might be relevant.

try this
if your computer keeps on blue screening re-Install your OS / motherboard software
if you have done so and it doesnt blue screen when your XS is plugged in, the content below will tell you how to fix your XS (XS = xperia s)
method 1
1- install sony companion service or
2- go to support zone
3- click repair phone
4- follow instructions
method 2
1- download flashtool
2- download your phones latest FTF
3-click on flash
4- select the FTF you downloaded
5- follow instructions (back button = volume down)
method 3
send your phone/compter for repairs or use a freinds computer
method 4
Google is your best friend

[SONY XPERIA J] ROOT/CWM Problem switching memories

Hello, i am joaquim and this is my first post so sorry if this is not in the right place or something and I also am a beginner in this subjects..
I have a few questions..My device is a Sony XperiaJ ST26i and the firmware is 11.2.A.0.31.
My inicial intention was to switch the internal memory with the ext_card..I have a friend with the exactily same device who recently did this and was soo easy for him, just root, no CWM rename the vold.fstab with the root explorer and it was done..Well this didn't work out for me and problems started to show here..
I searched a lot and this forum was a big help but somehow I allways ended up stuck.
First I rooted the device..ok! then I wanted to install the CM10 ROM, well I couldn't :S as some topic here refered I installed on my PC the flashtool and no signs of my device in the program..still i went further and in the step that I unplug my device from the PC when I plug him back holding the "+" button the flashtool says that "usb debuging is off" and "MTP is off" and they are both turned on..but then again I don't even know if i am starting the device in the recovery mode in the right way :S
Can anybody help? Am I doing the things right? if not is there a simple way or something?
another question, should I reset my device to the inicial values to do this kind of things? and i am assuming that the ext_sdcard does not make difference if is on or off...
Ho and to root i used the Adb...
I would apreciate have this problem solved..I am stuck in this for days and have searched and searched and what works for the others allways leads me to a dead end -.- It can be a small detail that i am not seeing ...
best regards,
JM

C1905 Problem with system.

Hi!
Yesterday I read something about google play shop. I wanted to install some apps, but I didn't meet the requirements. And i found solution. I had to go to system folder and edit build.prop But first i backup this file.
I did it. Then I turned off and turned on my phone. But I still can't install this apps. So I copy backuped file from SD card and paste it to the system folder. Again I turned off my phone, but then it can't be turned on.
I will describe it: when I'm turning on my phone, I see Sony logo, and it changes to black screen. When I wait 5 seconds, I'm seeing this again, and again. I have to remove the battery to stop this.
I think that if I edit this file again and change it value to this value, with which was working, my phone will be working fine.
This file contains info about phone. When i edited this file I change it from M to Z5, from 4.3 to 5.1 and from C1905 to E6653. Now I want to change it again to Z5, 5.1 and E6653. I think it will work.
My question is HOW to change this? And maybe you have other solutions.

I had uplad a stock rom to my phone by flashtool. Flashtool said to unplug cable and turn on my phone. And now I see turning on animation again and again. I turned off and turned on my phone. And i have this same

If you are trying to use flashtool means you got an unlocked bootloader. I recomended google "xperia m ftf" and install again the original ftf via flashtool

brick sony xa2 h4113

hello
i have brick my phone. I was trying to download e rom and after I reset it to factory wiping data it becomes a drama. when it try to boot, comes a message saying that my device is corrupt. it cant be trusted and it will not boot.
anyone can help me with this??
thanks a lot

Use Sony's Emma. Download it. With phone off hold volume down button while plugging in. Let software detect phone and find available firmware, pick the one you want and let it work.

Thank you so much for your answer.
I have try allready to download it and so on , but when I was ready to use it it ask me yo send my data to sony to ask for permission before I could use it. And Sony says that I cant get it cause is just an internal program. what can I do then?
bobsright said:
Use Sony's Emma. Download it. With phone off hold volume down button while plugging in. Let software detect phone and find available firmware, pick the one you want and let it work.
Click to expand...
Click to collapse

pekas said:
Thank you so much for your answer.
I have try allready to download it and so on , but when I was ready to use it it ask me yo send my data to sony to ask for permission before I could use it. And Sony says that I cant get it cause is just an internal program. what can I do then?
Click to expand...
Click to collapse
Don't need user name and password, open the downloaded file and copy paste file “Customization.ini” to “C:\Program Files\Sony Mobile\Emma\”

thanks for it