Related
Please guys..could anybody help me??error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
I tried everything but i can't make it works...the window is always the same ... :shock: error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
MaUpgradeUt_noID doesn't work...
PLEASE PLEASE PLEASE...thanks
mik111
Did you tried hard reset it?
First, don't get panic! Well.When I tried to unlock my device and make it Super CID that message appeared in my screen too.I tried anything I was told in this fantastic forum and nothing worked.Finally I was told to reinstalled windows on my PC and...it worked!! I think it's a problem of drivers. If you are desperated try it.
Good luck and be the force with you...
may the force be with you! :lol:
but like alberbrando said, don't panic. panic would only make things worse. try re-installing your windows. Hopefully, that should resolve your problem.
???
gtm55 said:
Did you tried hard reset it?
Click to expand...
Click to collapse
hi guys..i tried to hard reset it but nothing happend..i'm very depressed...how can it be possible??i've already done this operation with this pc..and it worked..is that possible ?drivers?reinstall windows??****..is one of the of the worst boring operations i've ever done..
any other ideas?
http://forum.xda-developers.com/viewtopic.php?t=61002
frz said:
http://forum.xda-developers.com/viewtopic.php?t=61002
Click to expand...
Click to collapse
thanks frz..i've hard resetted...nothing happend...
So do the other thing they told you and reset windows.
Which is worse? a few hours boredom of backups and reinstalls, or spending what. . . 1300. . £2600 on new PDA's for you and your friends?
I know which one I'D pick.
Try
Try with this upgrade Tools
-put nk.nbf file on this folder
-put your device to bootloader mode
-deactive active sync on your computer
-connect to USB
-Run upgrade tools
cheers
indra9110
Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.
TheBlasphemer said:
Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.
Click to expand...
Click to collapse
Thanks Blasphemer but i've done that 2000 times with no success at all...i think that entirely rebuild the pc is my last chance... I don't wanna think at what will happen when the same old window will came out...I' m preparing my gun... :shock:
b4 attempting to flash
b4 attempting to flash,
chk if the 3 steps with mtty work,
if u don't get any error,
plz get ur battrey charged fully from a friend.
then attempt a flash by downloading a different rom from the one u r presently using
disable ur pc firewall
also disable ur anti virus [dont know if this is really required...but i read it in quite a few forums & it worked for me...]
flash only the rom
no extended rom or radio
use the MaUpgradeUt_noID
hopefully this should sort out ur problem....
i know coz i had the same problem....
frz
Another suggestion....
before making any other test, if it's possible, try on another PC, using a fresh rom (not the same used...) .... can be a PC problem, so test the procedure on another host ....
... sorry, again...
have you checked the bootloader version on the devices ? ... verify it before any other tentative ....
Hi guys.
I was using the installed the FInixNOver 3.0.1 ROM onto my SPV M700 and it was great. I've had it for about 2 weeks without any problems.
Last night I looked at my phone, only to realise that it was completley dead. This didnt shock me to much because the battery was running low, and i decided to let it die completley before recharging it again.
I charged my phone overnight and switched it on this morning, but the phone would freeze at the 'FInixNOver' splash screen (the numbers at the bottom of the screen would appear overlaying the splash, but the phone wouldnt go pass this point).
The only way to turn off the phone from this state is to eject the battery. I have tried removing the sim card, turning it back on in as many ways as possible but to no avail. I am able to get to the TriColor test screen (im running IPL-0.50 / SPL-1.30.Olipro) but with all the custom roms available, they all use the ROMUpdateUtility which requires the phone to have established an activesync connection initially (but this would mean my phone would have to be 'on completley' - so this is catch 22.)
For the record, my phone/battery died while my wired handsfree was attached (dunno if thats of any interest to anyone or the rom baker).
But it looks like the only way i'll be able to flash my phone is by finding a way to install the .nbh file without using the RUU method. Because I can put my phone into test mode manually.... any help or guidence would be very much appriciated.
Thanks.
Ok can you get it into bootloader? power/camera buttons and reset?
sorry didnt read fully.
right get your device into bootloader first,
then open active sync (are you using xp)
then open connection settings and disable usb connection,
put your device into bootloader mode, then run any rom upgrade, i prefer the WM6.1 pdaviets from HERE (Username: PDAVIET / Password: pdaviet)
Your pda does not need active sync with ruu's, so no catch 22. if you turn off usb connection in active sync, you can still run ruu and it will be recognised, unless you are using vista, where you need to change your HTC SYNC drivers.
Thanks for your quick response...
Yes I can get into boot loader using the power and camera buttons (or holding the power and camera buttons when resetting the phone)...
When the phone is in boot loader mode, active sync doesnt even detect the phone anyway, but nevertheless, I have followed your instructions and disabled the USB Connection. (BTW, yes i am using XP)
The phone is still in boot loader mode, so now i try and execute the ROMUpdateUtility.exe and go through the steps, at the 1st step i tick the tickbox and click next, and the 2nd step i tick the tickbox and click next. (this step says DO NOT enter the bootloader manually? - but i have havent i?) anyway, when i click next, it says... "Verifying the information on your Trinity... Please Wait..." for about 10 seconds, and then i get a message "ERROR [260] : CONNECTION"
What am i doing wrong?
Huumm.. why dont you flash your phone throw the sd card??
Read this link:
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
try to flash your phone with some official rom and after that flash it with any other you want!
manos_23 said:
try to flash your phone with some official rom and after that flash it with any other you want!
Click to expand...
Click to collapse
I would recommend this option above, to be safe, i usually get them error messages when the battery is below 50% or sometimes i try it again and it works. it does state do not manually enter bootloader but i always do it this way.
also make sure active sync is not still running in taskmanager under the alais: wcescomm.exe and WCESMGR.exe, end them both.
I've just tried using an official ROM, but the problem still occurs with the 'connecting'. It doesnt seem that the computer picks up a connection to the phone whatsoever.
Should i be concerned that at the bottom of the bootloader screen it says "serial", is this correct?
Im starting to get annoyed now.
Bye,
the bottom of the sreen mast say "usb" not serial.
it seems there is a problem, if it states serial. as it should say usb. try THIS
Seems like the problem was that my USB lead was loose and made a bad connection, hence why the bootloader showed 'serial' and not 'usb'... as soon as i wiggled it and heard the 'connection noise' in windows, i knew i was good to go, and so using the RUU worked fine to reupdate my phones ROM.
Thanks for your help.
My only question is that why did it happen in the first plave?
WIZZKID - I just saw your post here now. I have to tell you that I also saw "SERIAL" at the bottom of the bootloader screen and not "USB". As I said I returned it to get another phone but maybe I will try something else for now instead of a P3600i. I will monitor your thread to see how it turns out for your phone, because it seems that we have the same problem.
if you see "serial" instead "usb" your problem is in the usb cable, usb port from your computer or in the usb connector from your trinity!!!!!
I was having the same problem that you have!! my problem was from my usb from mine trinity!! see if the conector is at good conditions !!!
Well as some of you may know, I got my Trinity replaced for sticking at the WM splash screen after a few days. This second one - I have had it ONE night - and the same thing has happened with incomplete booting. This time I have been trying all night to flash the phone to an official ROM, but I cannot do it (apparently) because I can't establish a connection via ActiveSync. When I stick the data cable in while in bootloader I see SERIAL replaced by USB and when I try the flash I get a "270" error (cannot connect to phone) and the phone re-boots to the sticking plash screen. What should I do now?
ladies and gentlemen...
we've got a lot of mixed messages in this thread.. please make sure you're posting the right thing. no need to disable USB when manually going in to bootloader to flash (at least in xp).. Also, you can ignore the part of the RUU that says 'do not manually enter bootloader' (you should really read the guide on my site)
foxuniform- can you please give some details..
1) are you running xp or vista
2) have you flashed hard-spl? if so what version?
in the mean time, try a couple of things.. first, flash hard-spl (even if you already have it, but from the sound of it i think you don't have it on your device).. if that works, try to flash an official ROM. Can also try to use splxploit, then flash hard-spl, and then flash official ROM (there's a guide on my site if you're unsure)
please post your results
*edit*
here are the steps for SD card upgrade, but i HIGHLY recommend flashing Hard-spl first..
try to do it from SD card. how?
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (http://www.cabextract.org.uk/) .
Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
When flashing completes soft-reset your device.
Make sure your SD has FAT32 and has no label. There have been reports that if SD has a label the bootloader can not access the TRINIMG.nbh
racerx_ I have carefully read your response and suggestions, and thanks for your expertise input on the matter. I am fairly new to this stuff so read below carefully as you may find errors in the way I tried to go about doing what I was hoping to accomplish.
First let me answer your questions. I am running Windows XP. The phone is in it's completely natural state in that I have not flashed it in any way. The ROM I was TRYING to flash to the phone while it was not starting properly (this is where I manually entered bootloader) is an official ROM from the HTC website (please note everyone that when I registered my P3600i on the HTC website it came up as the Dopod 810). Anyway, that never worked. ActiveSync never detected the phone (and I guess that's the reason I could not do anything as far as flashing goes). I HARD-RESET my P3600i and it booted normally. I re-installed all the stuff I had on it, from memory card to various .cab files, and the phone is working beautifully thus far. I will report if anything funny happens again.
I have to ask you racerx_, if I CAN flash hard-SPL on the P3600i according to the lovely guide on www.trinityguides.info. I have been of the opinion that things don't work for the P3600i as they did for the P3600, and that has been echoed by many P3600i users on this forum who are ready and waiting to try out some cooked ROMs (myself included).
For the sake of record, my phone is running rom version 3.00.707.17 and radio version 1.46.00.11. I patiently await your response.
woaaahhh..
i didn't notice the 'i' in your previous post... yeah, as far as i know, these ROMs are not flashable on your p3600i.. sorry..
**correct me if i'm wrong somebody**
Yeah I kinda thought that would be your response. By the way - do you think that this phenomenon of sticking at the Windows Mobile splash screen (both the P3600 and P3600i models apparently) has anything to do with something users do with the devices, or you figure it's an inherent software glitch of some sort? I am wondering if I should try a different model or hold on to my P3600i? Hope it's not something that'll happen again - I fly for a living and it's not gonna be good to have the thing screw up on me away from base - I really count on it for everything from casual keeping in touch on Messenger to viewing my work schedule. I love the Trinity though - it's one of my all-time favourite HTC phones.
hmm... i don't think its inherent in the Trinity.. (not a hardware issue.. in my opinion)
its been a while since i followed the posts on it, but always seems to be software related.. sometimes ROM-specific problem. Personally, i've probably flashed as many ROMs as anyone and the only time i ever encountered problems was with the official HTC WM6 ha.. go figure.. I think ppl did find that hard resets before and after flashing are helpful as well..
i love my trinity, and there's not much else on the market to make me want to trade it in (is it just me, or have pda's kind of stopped getting cooler).. i'd stick with it..
Here's the thing , I unlocked my bootloader and rooted my phone a while back (probably using an already outdated software , if i remembered correctly it was 2.3.3 , but i knew i followed the instructions here
http://forum.xda-developers.com/showthread.php?t=1133650)
Today, my phone asked if I wanted to update the software (like an automated software update) and i could choose to update or not and i chose yes but now , my phone won't start up for like 3 hours already . I tried turning it on but it won't turn on , i tried charging it but there isn't any lights which was supposed to be there .
So I decided to google it and i followed the instructions here
http://talk.sonyericsson.com/thread/26720
but after installing both , choosing my phone , followin the instructions on update service , it gets stuck on "it contains a modified software that cannot be updated" so decided to come back here to ask you guys what I should do .
Right now , all I want to do is for my phone to start up again , any ideas ?
edit : right now , i took out the battery , and put it back in . This time when I tried to turn it on , the vibrate is there which wasn't there initially and theres 1 flash of the green light on the side of the phone .
and also , i think its recognized by the computer because i can hear the sound notification (the same sound when you plug a USB into a computer) which wasn't there before I did the update service thingy .
edit 2 : it won't go into safemode either when i tried clicked the right and left buttons below the display (the menu and back button) and the power button after that . yes i tried reinserting the battery .
edit 3 : I'm not sure if this'll help but my phone is recognized as SEMC flash device (i checked on device manager) and theres a green colour non flashing light when i plug my phone into the pc .
http://forum.xda-developers.com/showthread.php?t=1304634
OMG
Thanks
Sorry for not searching , I tried looking for Xperia arc won't load up / start up but it didn't give me this thread .
Thanks again
edit : i thanked you too
same problem!!!
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
gadjet87 said:
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
Click to expand...
Click to collapse
Try to flash a new(er) kernel with recovery and install a new rom (your phone is ota-bricked, so if that doesn't work, search on XDA)
Sent from my LT18i using xda premium
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
In the past I have a problem with media scanner message, always running in the background, although I had no problems about rebooting or soft-resets, it was only a message running in the background always. The way I solve it was to go into "almacenador de medios" (dont know in english, maybe something like "media store") in app manager, and then force stop, clean data and clean cache, reboot and after a first past again, all went ok. I suppose you continue with the message after reseting maybe because cache or dalvik cache is not clean.
Hope that help.
pr0_eMoTIoN said:
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
Click to expand...
Click to collapse
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
MafiaGR said:
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
Click to expand...
Click to collapse
already tried this
but problem havnt solved after "emergency firmware recover"
anyone knows how i can made root without access rights to sd card?
ways like "frameroot.apk" and via bat file "currentroot.bat" - not worked (all those methods need access to sd card)
or maybe there are any commands on ADB to reset or fix sd card?
i'm rly sad with my problem....
what is the model of your phone and ROM?
did You try go back to stock rom with LGMobile Support Tool?
I have same problem but it occurs when I flash to E97510D ROM (my phone is F180K):
http://forum.xda-developers.com/showthread.php?t=2246867
when I want to fix it, I make emergency firmware recovery in LGMobile Support Tool (and factory reset after this).
Maybe your motherboard is giving up
no... every time I go back to stock ROM, its working fine
bihslk said:
Maybe your motherboard is giving up
Click to expand...
Click to collapse
i think this is rly...
cos i have tried already all ways...
Hello....I bricked my I927 when I accidently formatted my efs partition when using EFS professional .....my phone boots in download mode.....but only boots till samsung logo screen.....I tried various things like installing stock GB and ICS through odin and installing custom firmware but phone boots onle till samsung logo and then lights up with sone stange colored thin lines and screen goes off.....In TRWP I get a "unable to mount preload" error whenever I try to install somethiing.....I suspect that the EFS partiton is corrupted and needs to be repartioned....I had backupped the efs folder when my phone was working before.....its in a tar format.....I read somwhere that someone made a recovery.zip out of his backedup EFS.IMG and flashed it with CWM solved his problems which were exactly similar to mine.....can somebody on the forum make a recovery.zip for I927 with update binary and script so that I can add the backedup EFS image to it and flash it with CWM? Please.....this would also help many others who are facing similar issues.....and also what do I do regarding the "unable to mount preload" error? I need to repartition and tried to install hemdall.....but get the common .dll error even after following all the instructions and installing C++ 2010.....
Hi, k one thing after the other.
Do you have repartitioned anything?
Do you have adb in place and does adb works when in TWRP?
The easiest thing would be to connect by adb then mount /efs and then restore the efs backup. The good is that you will have a good chance to recover your device. Maybe you need to reformat /efs but that depends.
Which timezone do you live? Maybe a Teamviewer session would be helpful?
.
Thank you for your reply sir...
THANKS FOR THE REPLY SIR....YES I WAS ABLE TO GO INTO CWM RECOVERY AND CONNECT THE PHONE WITH MINIMAL ADB FASTBOOT.....AND AFTER SPENDING ALMOST 2 DAYS CONTINUOUSLY TRYING TO FIND THE PROBLEM USING GOOGLE, I TRIED DIFFERENT COMMANDS ON ADB TO GET EFS BACK OJ THE PHONE....BUT WITH NO SUCCESS...... MY EFS BACKUP IS IN TAR FORMAT......IT WAS MADE USING GALAXYSIMUNLOCK BY SPOCKY.....I LATER TYPED IN 'ADB MESG'.....OR SOMETHING SIMILAR TO THAT COMMAND, AND FOUND OUT THAT ALL THE PARTITIONS ON mmcblk0 were mangled up with strange letters.....for eg, p1, p2, p3 and so on had strange characters written next to them.....SO I TRIED TO RE-PARTITION THE WHOLE THING WITH SDPARTED......AND IT RE-PARTIONED THE SYSTEM (AROUND 7000MB).....MMCBLK01 (AROUND 500MB).....AND ANOTHER THING I CANT REMEMBER NOW.....BUT WHEN IT FINISHED THE JOB, IT GAVE ME A mmcblk02 ERROR.....AND WHEN WHEN I CHECKED MY PHONE ON CWM SCREEN, IT GAVE ME A LIST OF CACHE ERRORS.....AND WHEN I SWITCHED OFF THE PHONE AFTER THAT IT REFUSED TO POWER ON.....IT WAS NOT EVEN GOING INTO DOWNLOAD OR RECOVERY MODE.....BATTERY HAD ENOUGH POWER....SO ITS NOT BATTERY FAULT......I SUPPOSE THAT SINCE THE PARTITIONS WERE FORMATTED THE PHONE BECAME COMPLETELY DEAD......CAN YOU TELL ME IF THERE IS ANY WAY WHERE I COULD GET THE COMPUTER TO RECOGNIZE MY PHONE USING A 'DEAD PHONE USB FLASH' OR SOMETHING.....AND THEN FLASH A BLANK BOOTLOADER AND THEN WRITE CWM?
I LIVE IN INDIA SIR.....+5.30 GMT.....I DO NOT KNOW ANYTHING ABOUT TEAMVIEWER.....IS IT AN ANDROID APP? CAN YOU EXPLAIN MORE IN DETAIL SIR?
PLEASE LET ME KNOW HOW TO GET THE COMPUTER TO RECOGNIZE THE PHONE AGAIN......
Well.. that sounds not that good...
Teamviewer (www.teamviewer.com) is an easy to use and free remote control software for your PC (it runs on both Linux and Windows). We could do a remote control session if you like. I can try to help but cannot promise anything.
I live in Germany: GMT +1. Send me a PM if you want to give that a try. Next Monday. Tuesday or Thursday would be possible on my site. At least for getting a short overview.
.
Thank you sir,
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Ok I have made one. It want to say it was VERY hard to find the correct instructions to do so and therefore I'm absolutely not sure if that will work for you!
Test it if you like but again: I have no idea if that would damage anything more than it is now!
See --> http://forum.xda-developers.com/cap...od-unbrick-debrick-hard-bricked-i927-t3285505
If it worked for you (would be like a miracle) then please report back!
If it does NOT work for you please report back, too!
thanks
xdajog
.
UPDATE:
Besides the link I posted --> Could you please also try the following:
1) Power on your device and directly after that:
2) Press and hold down Vol Up + Vol Down (both the same time)
3) You should see a warning message like the attached one which is the APX mode
4) you need to release the vol buttons immediately after you see the APX mode otherwise it will continue to the non working download mode.
Does teamviewer require internet connection with a lot of data?
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Uhm do you have read my above post??
.
1927 wouldn't boot.....Help.
Ohhhh Thank you.....thank you.....thank you for your kind reply Sir.....how good of you to take all your precious time to help me.....I greatly appreciate all your hard work Sir.....wonderful...*.I wanted to download your img file to try it out and when I read the reply of brother Bubor, that the I927 woudnt boot from the SD card when the bootloader is bricked, I was very disappointed. Like I said before, I have a very very slow internet connection with very less data left....and according to brother bubor's reply I doubt this will work....It looked like he was sure that it wont work....I tried to get into APX mode as the link that brother bubor posted had mentioned, but no luck, as the phone is not going into APX mode.....I remember that when I was trying to get to the APX mode the first time, the computer flashed a notification that the APX driver was not successfully installed.....but after that I tried the method more than a dozen times, but the computer was not recognizing the phone to go into APX mode.....Does the phone go into APX mode when the full internal phone system is formatted? I tried your second method on trying to get to APX mode, but nothing happens.....the computer is not recognizing the phone.....The battery had about 30% power in it when the phone got bricked 2 weeks ago.....Dont know if the battery drained all these days of not using the phone.....And even if I get to the APX mode, I have no idea how to proceed from there to repartition the internal phone system and get back download mode.....In the link that brother bubor posted the person who made the thread has made some files to be used when one gets into APX mode.....The PIT and emmc files which are necessary for repartitioning the system and getting the bootloader work are found in that zip file.....But that zip file is for the I9103 Galaxy R.....there isnt something like that available for the I927 yet.....And is brother bubor sure that the unbrick.img file wont work on the I927?
Give it a try with my unbrick image.
we all don't know.
.
xdajog said:
Give it a try with my unbrick image.
we all don't know.
.
Click to expand...
Click to collapse
Hi @alvcross: any update on this?
have you tried the SD card unbrick?
You said you cannot open the APX mode but what happens when you press the buttons for accessing the APX mode?
Try it even if you see a blank screen and then connect your Cappy with USB to your computer --> you should get a message about a missing driver or similar.
If that works I tell you how to proceed.
xdajog said:
hi @alvcross: Any update on this?
Have you tried the sd card unbrick?
You said you cannot open the apx mode but what happens when you press the buttons for accessing the apx mode?
Try it even if you see a blank screen and then connect your cappy with usb to your computer --> you should get a message about a missing driver or similar.
If that works i tell you how to proceed.
Click to expand...
Click to collapse
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
alvcross said:
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
Click to expand...
Click to collapse
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
alvcross said:
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
Click to expand...
Click to collapse
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes Sir....I understand....
alvcross said:
Yes Sir....I understand....
Click to expand...
Click to collapse
Ok could you please try these driver package here: http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
Follow the instructions there for installing
The next step (if the driver would work for you) will be to flash a working PIT to your device to make sure you are using the correct partitions.
Afterwards we will flash the bootloader (may absolutely brick your device if not done correctly) and then --> if all goes fine --> you should be able to flash in download mode whatever you want to.
So it is still a long way to go and I need to check all the steps first before actually we can proceed.
That may take longer so do not expect that this will be something in the next days.. sorry.
Update:
If the above universal driver do NOT work for you: Test these one here View attachment apx_driver_samsung.zip
.
Thanks for the speedy reply Sir......Ill do as you said and let you know Sir......thank you.....thank you.....thank you Sir....
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
alvcross said:
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
Click to expand...
Click to collapse
nvidia apx isnt fastboot/adb device. You can found tool on nvidia site ( more info https://ac100.grandou.net/nvflash ), this tool can read and write whole flash.
Before you could use nvidia's tool, you must send an uniq blob to your phone. APX mode is useless without this blob.
This blob is uniq for every phone.