Related
I want to install new roms but my device dosent seem to work,i have already rooted and installd "TouchRecoveryInstaller-v1_01" but cant seem to have permission to back up my current rom b125 and install new ,help please..
With CWM you can't backup/restore ROM. Try TWRP.
Sent from my A1-810 using Tapatalk
okay can u gv me link please
alex.79 said:
With CWM you can't backup/restore ROM. Try TWRP.
Sent from my A1-810 using Tapatalk
Click to expand...
Click to collapse
I have downloaded this one "TWRP_R03" zip how do I install it
iscaac said:
I have downloaded this one "TWRP_R03" zip how do I install it
Click to expand...
Click to collapse
Try using this guide in the General section...
http://forum.xda-developers.com/showthread.php?p=50041089
Regards,
Jimbo
Sent from my HUAWEI P6-U06 using Tapatalk
jimbo77 said:
Try using this guide in the General section...
http://forum.xda-developers.com/showthread.php?p=50041089
Regards,
Jimbo
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
thanks but I think I just killed my phone I formatted it but it didn't restart its now stuck on logo am tryn vol up+vol down but nothing is working
About flash rom
Hello
I install b125 firmware inernational on b111 where was in phone as default when bay.
My question:
it is possible install b118 cn and after flash HYD52ROM V5 rom by Installation Instruction
if yes then
it is possible install on back official b111 international for waranty
Thank you
Sorry for my English
mstaskovan said:
Hello
I install b125 firmware inernational on b111 where was in phone as default when bay.
My question:
it is possible install b118 cn and after flash HYD52ROM V5 rom by Installation Instruction
if yes then
it is possible install on back official b111 international for waranty
Thank you
Sorry for my English
Click to expand...
Click to collapse
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
iscaac said:
I have downloaded this one "TWRP_R03" zip how do I install it
Click to expand...
Click to collapse
You can backup and restore with CWM. First install CWM and than flash TouchRecoveryLoader.zip from this forum:
http://forum.xda-developers.com/showthread.php?t=2417919
husen4u said:
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello
Thank you for your response. I am a layman. What do you think "if you want unlock bootloader". I want to install this rom [ROM][KK][P6-U06][ HYD52ROM V5] [SUPERFAST & Stable][V5 10-02-14] by installation instruction
starting point international rom b125
1. You Must Be On B118CN OR B120CN OR ANY UNLOCKED FIRMWARE (CAN BRICK YOUR PHONE SO BE CAREFULL)
is it possible install this b118 or B120 with dload method
2. Install TWRP Recovery
3. Wipe Factory Reset Goto Advance And Wipe Everything Except (Internal And External Storage)
I do not understand
4. Install HYD52ROM_P6_V5_KK.zip
5. Wipe Dalvik/Cache
I do not understand
6. Install Gapps
I do not understand
7.Wipe Dalvik/Cache
I do not understand
8. Install Superuser
for example eroot?
9. Wipe Cache Dalvik
I do not understand
10.Reboot
HOW INSTALL BACK B125 AND LOCK BOOTLOADER?
E.g. We can use DLOAD METHOD?
Thank you
mstaskovan said:
Hello
Thank you for your response. I am a layman. What do you think "if you want unlock bootloader". I want to install this rom [ROM][KK][P6-U06][ HYD52ROM V5] [SUPERFAST & Stable][V5 10-02-14] by installation instruction
starting point international rom b125
1. You Must Be On B118CN OR B120CN OR ANY UNLOCKED FIRMWARE (CAN BRICK YOUR PHONE SO BE CAREFULL)
is it possible install this b118 or B120 with dload method
2. Install TWRP Recovery
3. Wipe Factory Reset Goto Advance And Wipe Everything Except (Internal And External Storage)
I do not understand
4. Install HYD52ROM_P6_V5_KK.zip
5. Wipe Dalvik/Cache
I do not understand
6. Install Gapps
I do not understand
7.Wipe Dalvik/Cache
I do not understand
8. Install Superuser
for example eroot?
9. Wipe Cache Dalvik
I do not understand
10.Reboot
HOW INSTALL BACK B125 AND LOCK BOOTLOADER?
E.g. We can use DLOAD METHOD?
Thank you
Click to expand...
Click to collapse
First of all if you flash b118 , b120 or kk your bootloader will be unlocked for ever it will not locked when you flash b125. If you want kk rom then flash kitkat beta using dload method
Then install twrp recovery.
Then goto twrp recovery. Then follow the steps i said. You will know everything when you enter twrp recovery. Gapp and superuser you have to download and install after you install ROM( without wiping anything. Wipe only before you install anyrom)
Sent from my P6-U06 using xda app-developers app
husen4u said:
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
husen4u said:
First of all if you flash b118 , b120 or kk your bootloader will be unlocked for ever it will not locked when you flash b125. If you want kk rom then flash kitkat beta using dload method
Then install twrp recovery.
Then goto twrp recovery. Then follow the steps i said. You will know everything when you enter twrp recovery. Gapp and superuser you have to download and install after you install ROM( without wiping anything. Wipe only before you install anyrom)
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
thank you
in my P6 with B125 is problem with wifi Self disconnects although good signal
Therefore, I wanted to install your KK rom
I do not know whether KK beta is good idea I hope this will be resolved in your KK rom.
I have P6 one week and battery problem resolved with upgrade to b125 but wifi work wrong
When I install KK beta bootloader still lock?
What do you think about KK beta is it better than B125 JB? Have I install it or wait for the official version of KK?
Thank you
mstaskovan said:
thank you
in my P6 with B125 is problem with wifi Self disconnects although good signal
Therefore, I wanted to install your KK rom
I do not know whether KK beta is good idea I hope this will be resolved in your KK rom.
I have P6 one week and battery problem resolved with upgrade to b125 but wifi work wrong
When I install KK beta bootloader still lock?
What do you think about KK beta is it better than B125 JB? Have I install it or wait for the official version of KK?
Thank you
Click to expand...
Click to collapse
I think kk is much better. If you install kk it will unlock bootloader. I am using Kk and dont have any wifi problem.
Sent from my P6-U06 using xda app-developers app
husen4u said:
I think kk is much better. If you install kk it will unlock bootloader. I am using Kk and dont have any wifi problem.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
KK beta or your adjusted rom based on KK is much better?
Instal both of this (KKbeta and your KK rom) unlock bootloader?
what do you recommend definitive
thank you
mstaskovan said:
KK beta or your adjusted rom based on KK is much better?
Instal both of this (KKbeta and your KK rom) unlock bootloader?
what do you recommend definitive
thank you
Click to expand...
Click to collapse
Ofcourse my ROM. You can install my kk ROM only if you have unlocked bootloader.
Sent from my P6-U06 using xda app-developers app
I cant do anything now my phone is still stuck on logo sign
husen4u said:
Ofcourse my ROM. You can install my kk ROM only if you have unlocked bootloader.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello
I finally decided install YOUR ROM KK. Can you help me please and write more detailed installation instruction by starting point:
curent rom B125 international. Thank you very much.
Hi husen4u,
I have the same firmware version with mstaskovan B125. Can we ask your suggestion, which is better to start
to flash your modded KK rom HYD52ROM V5.
Thanks in advance.
jterc said:
Hi husen4u,
I have the same firmware version with mstaskovan B125. Can we ask your suggestion, which is better to start
to flash your modded KK rom HYD52ROM V5.
Thanks in advance.
Click to expand...
Click to collapse
Modded KK ROM But Only If You have Unlocked Bootloader.
husen4u said:
Modded KK ROM But Only If You have Unlocked Bootloader.
Click to expand...
Click to collapse
If I will flash it first with KK beta version rom, will it unlock the boot loader?
Before installing your HYD52ROM V5.
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.
I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app
Install this Original_Recovery
You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...
ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?
pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?
pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:
Thanks ,,,,, it works :good:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse
I can't download from that link. anybody knows another link ?Thank you !
Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
thanks !!!
Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
asphalt30000 said:
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
Click to expand...
Click to collapse
Someone help me plZzzzzzzZz
asphalt30000 said:
Someone help me plZzzzzzzZz
Click to expand...
Click to collapse
Install B510
FutureIntelligence said:
Install B510
Click to expand...
Click to collapse
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
asphalt30000 said:
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
Click to expand...
Click to collapse
is there anybody can help me?
asphalt30000 said:
is there anybody can help me?
Click to expand...
Click to collapse
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
iwtfmcl said:
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
Click to expand...
Click to collapse
tnx my frnd but i already did this way.but it didnt work
I need someone to help . PlzZzZZZZ
asphalt30000 said:
I need someone to help . PlzZzZZZZ
Click to expand...
Click to collapse
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
I have sucsh problem too... But no sucsess till now
I did all above you said
miz_pimp said:
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
Click to expand...
Click to collapse
Ya bro i did it. thousand time
asphalt30000 said:
Ya bro i did it. thousand time
Click to expand...
Click to collapse
Then flash the device again using the 3-button method immediately after?
miz_pimp said:
Then flash the device again using the 3-button method immediately after?
Click to expand...
Click to collapse
I know what u mean bro but whenever i want to flash any roms i did it this way
asphalt30000 said:
I know what u mean bro but whenever i want to flash any roms i did it this way
Click to expand...
Click to collapse
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
miz_pimp said:
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
Click to expand...
Click to collapse
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
asphalt30000 said:
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
Click to expand...
Click to collapse
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
miz_pimp said:
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
Click to expand...
Click to collapse
Oh sryyyy???my sis
Yeah no one can help me??. I have been searching all of the internet but nothing helps me
I instaled twrp & 3 custom rom but they are like chinnies rom unfortunately.
Again tnx my siiiis
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
sko4a said:
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
Click to expand...
Click to collapse
Tnx alot my frnd . I will do this and i will say the result. I hope sooooo
no its not working for me . still stucking in android logo :crying::crying::crying::crying::crying:
Hello,
Im User of Huawei P6 B709_modby Oxalis_v08. I wanna back to JB or stay at KK but return to B520 ... But I dont know how do this.
I flashed B709 by TWRP... But how return to B520 ? Tried to by http://forum.xda-developers.com/asce...inese-t2951566 but I dont understand how do this...someone can write how install it step by step ??
Really? No one knows how do this?
I am in a similar situation like yours. Want to go to CM11 from Oxalis rom. I will attempt to install stock recovery of KK and then flash the original rom of 4.4.2 after that its back to the regular way of flashing
You can download the official upgrade to Kitkat B520 from Huawei: http://consumer.huawei.com/nl/support/downloads/detail/index.htm?id=38302&key4=huawei%20ascend%20p6
It's very slow though, I flashed it and it was so slow and bad that I immediately flashed Paranoid Android 4.6 beta. Which is great by the way.
Ozik89 said:
Hello,
Im User of Huawei P6 B709_modby Oxalis_v08. I wanna back to JB or stay at KK but return to B520 ... But I dont know how do this.
I flashed B709 by TWRP... But how return to B520 ? Tried to by http://forum.xda-developers.com/asce...inese-t2951566 but I dont understand how do this...someone can write how install it step by step ??
Click to expand...
Click to collapse
xefaros said:
I am in a similar situation like yours. Want to go to CM11 from Oxalis rom. I will attempt to install stock recovery of KK and then flash the original rom of 4.4.2 after that its back to the regular way of flashing
Click to expand...
Click to collapse
Update: i finally made it to b132 by installing this https://www.androidfilehost.com/?w=...86595ef5034a2070982e9a6876ad434117e6b1c417ae2 recovery and then following this guide http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
It seemed to me the stock recovery the twrp thread had was shot and failed to work with SD cards. But after using the other recovery i successfully moved back to b132.
My process 1) put unicorn into sd 2)flash recovery from the above link 3)local update to unicorn 4)reboot into oxalis 5)put b132 into sd 6)local update to b132 7)stuck in bootanimation 8)force update to b132(Vol + -) 8)boot into b132
After that you can update from software update to b520 or the local/sd way