I want to install new roms but my device dosent seem to work,i have already rooted and installd "TouchRecoveryInstaller-v1_01" but cant seem to have permission to back up my current rom b125 and install new ,help please..
With CWM you can't backup/restore ROM. Try TWRP.
Sent from my A1-810 using Tapatalk
okay can u gv me link please
alex.79 said:
With CWM you can't backup/restore ROM. Try TWRP.
Sent from my A1-810 using Tapatalk
Click to expand...
Click to collapse
I have downloaded this one "TWRP_R03" zip how do I install it
iscaac said:
I have downloaded this one "TWRP_R03" zip how do I install it
Click to expand...
Click to collapse
Try using this guide in the General section...
http://forum.xda-developers.com/showthread.php?p=50041089
Regards,
Jimbo
Sent from my HUAWEI P6-U06 using Tapatalk
jimbo77 said:
Try using this guide in the General section...
http://forum.xda-developers.com/showthread.php?p=50041089
Regards,
Jimbo
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
thanks but I think I just killed my phone I formatted it but it didn't restart its now stuck on logo am tryn vol up+vol down but nothing is working
About flash rom
Hello
I install b125 firmware inernational on b111 where was in phone as default when bay.
My question:
it is possible install b118 cn and after flash HYD52ROM V5 rom by Installation Instruction
if yes then
it is possible install on back official b111 international for waranty
Thank you
Sorry for my English
mstaskovan said:
Hello
I install b125 firmware inernational on b111 where was in phone as default when bay.
My question:
it is possible install b118 cn and after flash HYD52ROM V5 rom by Installation Instruction
if yes then
it is possible install on back official b111 international for waranty
Thank you
Sorry for my English
Click to expand...
Click to collapse
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
iscaac said:
I have downloaded this one "TWRP_R03" zip how do I install it
Click to expand...
Click to collapse
You can backup and restore with CWM. First install CWM and than flash TouchRecoveryLoader.zip from this forum:
http://forum.xda-developers.com/showthread.php?t=2417919
husen4u said:
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello
Thank you for your response. I am a layman. What do you think "if you want unlock bootloader". I want to install this rom [ROM][KK][P6-U06][ HYD52ROM V5] [SUPERFAST & Stable][V5 10-02-14] by installation instruction
starting point international rom b125
1. You Must Be On B118CN OR B120CN OR ANY UNLOCKED FIRMWARE (CAN BRICK YOUR PHONE SO BE CAREFULL)
is it possible install this b118 or B120 with dload method
2. Install TWRP Recovery
3. Wipe Factory Reset Goto Advance And Wipe Everything Except (Internal And External Storage)
I do not understand
4. Install HYD52ROM_P6_V5_KK.zip
5. Wipe Dalvik/Cache
I do not understand
6. Install Gapps
I do not understand
7.Wipe Dalvik/Cache
I do not understand
8. Install Superuser
for example eroot?
9. Wipe Cache Dalvik
I do not understand
10.Reboot
HOW INSTALL BACK B125 AND LOCK BOOTLOADER?
E.g. We can use DLOAD METHOD?
Thank you
mstaskovan said:
Hello
Thank you for your response. I am a layman. What do you think "if you want unlock bootloader". I want to install this rom [ROM][KK][P6-U06][ HYD52ROM V5] [SUPERFAST & Stable][V5 10-02-14] by installation instruction
starting point international rom b125
1. You Must Be On B118CN OR B120CN OR ANY UNLOCKED FIRMWARE (CAN BRICK YOUR PHONE SO BE CAREFULL)
is it possible install this b118 or B120 with dload method
2. Install TWRP Recovery
3. Wipe Factory Reset Goto Advance And Wipe Everything Except (Internal And External Storage)
I do not understand
4. Install HYD52ROM_P6_V5_KK.zip
5. Wipe Dalvik/Cache
I do not understand
6. Install Gapps
I do not understand
7.Wipe Dalvik/Cache
I do not understand
8. Install Superuser
for example eroot?
9. Wipe Cache Dalvik
I do not understand
10.Reboot
HOW INSTALL BACK B125 AND LOCK BOOTLOADER?
E.g. We can use DLOAD METHOD?
Thank you
Click to expand...
Click to collapse
First of all if you flash b118 , b120 or kk your bootloader will be unlocked for ever it will not locked when you flash b125. If you want kk rom then flash kitkat beta using dload method
Then install twrp recovery.
Then goto twrp recovery. Then follow the steps i said. You will know everything when you enter twrp recovery. Gapp and superuser you have to download and install after you install ROM( without wiping anything. Wipe only before you install anyrom)
Sent from my P6-U06 using xda app-developers app
husen4u said:
You can install any firmware with dload method but when installing b118 thr is chance of brick your device. I refer you install kitkat if you want unlock bootloader.
Yes you can flash B111 anytime you want
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
husen4u said:
First of all if you flash b118 , b120 or kk your bootloader will be unlocked for ever it will not locked when you flash b125. If you want kk rom then flash kitkat beta using dload method
Then install twrp recovery.
Then goto twrp recovery. Then follow the steps i said. You will know everything when you enter twrp recovery. Gapp and superuser you have to download and install after you install ROM( without wiping anything. Wipe only before you install anyrom)
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
thank you
in my P6 with B125 is problem with wifi Self disconnects although good signal
Therefore, I wanted to install your KK rom
I do not know whether KK beta is good idea I hope this will be resolved in your KK rom.
I have P6 one week and battery problem resolved with upgrade to b125 but wifi work wrong
When I install KK beta bootloader still lock?
What do you think about KK beta is it better than B125 JB? Have I install it or wait for the official version of KK?
Thank you
mstaskovan said:
thank you
in my P6 with B125 is problem with wifi Self disconnects although good signal
Therefore, I wanted to install your KK rom
I do not know whether KK beta is good idea I hope this will be resolved in your KK rom.
I have P6 one week and battery problem resolved with upgrade to b125 but wifi work wrong
When I install KK beta bootloader still lock?
What do you think about KK beta is it better than B125 JB? Have I install it or wait for the official version of KK?
Thank you
Click to expand...
Click to collapse
I think kk is much better. If you install kk it will unlock bootloader. I am using Kk and dont have any wifi problem.
Sent from my P6-U06 using xda app-developers app
husen4u said:
I think kk is much better. If you install kk it will unlock bootloader. I am using Kk and dont have any wifi problem.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
KK beta or your adjusted rom based on KK is much better?
Instal both of this (KKbeta and your KK rom) unlock bootloader?
what do you recommend definitive
thank you
mstaskovan said:
KK beta or your adjusted rom based on KK is much better?
Instal both of this (KKbeta and your KK rom) unlock bootloader?
what do you recommend definitive
thank you
Click to expand...
Click to collapse
Ofcourse my ROM. You can install my kk ROM only if you have unlocked bootloader.
Sent from my P6-U06 using xda app-developers app
I cant do anything now my phone is still stuck on logo sign
husen4u said:
Ofcourse my ROM. You can install my kk ROM only if you have unlocked bootloader.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello
I finally decided install YOUR ROM KK. Can you help me please and write more detailed installation instruction by starting point:
curent rom B125 international. Thank you very much.
Hi husen4u,
I have the same firmware version with mstaskovan B125. Can we ask your suggestion, which is better to start
to flash your modded KK rom HYD52ROM V5.
Thanks in advance.
jterc said:
Hi husen4u,
I have the same firmware version with mstaskovan B125. Can we ask your suggestion, which is better to start
to flash your modded KK rom HYD52ROM V5.
Thanks in advance.
Click to expand...
Click to collapse
Modded KK ROM But Only If You have Unlocked Bootloader.
husen4u said:
Modded KK ROM But Only If You have Unlocked Bootloader.
Click to expand...
Click to collapse
If I will flash it first with KK beta version rom, will it unlock the boot loader?
Before installing your HYD52ROM V5.
Related
Hi,
Sorry for this noob question. Can anybody post in detail on how to install a custom ROM
for Huawei P6 like HYD52ROM V6?
Thanks.
jterc said:
Hi,
Sorry for this noob question. Can anybody post in detail on how to install a custom ROM
for Huawei P6 like HYD52ROM V6?
Thanks.
Click to expand...
Click to collapse
Give Us Some Detail Like On Which Firmware You Are on Right Now, Have You Ever Flash Any ROM Before?
husen4u said:
Give Us Some Detail Like On Which Firmware You Are on Right Now, Have You Ever Flash Any ROM Before?
Click to expand...
Click to collapse
I'm using B125, now I want flash it first with KK beta to unlocked my bootloader. Yes, I flash B125 and that was my first time.
So now I want to folllow your instructions as mention on your post. So, I'm still confused with what TWRP to use, then installing
your custom ROM. Your kind help is very much appreciated.
Thanks.
jterc said:
I'm using B125, now I want flash it first with KK beta to unlocked my bootloader. Yes, I flash B125 and that was my first time.
So now I want to folllow your instructions as mention on your post. So, I'm still confused with what TWRP to use, then installing
your custom ROM. Your kind help is very much appreciated.
Thanks.
Click to expand...
Click to collapse
Flash Kitkat Beta Using dload Method.
Then Flash Twrp For KK Link : http://forum.xda-developers.com/showthread.php?t=2632542
Then Flash My ROM. Follow Instruction On My Thread.
husen4u said:
Flash Kitkat Beta Using dload Method.
Then Flash Twrp For KK Link : http://forum.xda-developers.com/showthread.php?t=2632542
Then Flash My ROM. Follow Instruction On My Thread.
Click to expand...
Click to collapse
Installing your customed ROM, means I have to put the zip file to SD, under dload folder or just put on SD?
jterc said:
Installing your customed ROM, means I have to put the zip file to SD, under dload folder or just put on SD?
Click to expand...
Click to collapse
Lets Think You Installed TWRP Recovery.
If You Don't Know Follow This Guide : http://forum.xda-developers.com/showthread.php?t=2636231
Then Download HYD52ROM_V5.Zip + Gapps + Superuser + V6 Patch
Copy All Of Them To Your SDCard (Not To Dload)
Then Follow Instructions In TWRP Recovery.
husen4u said:
Lets Think You Installed TWRP Recovery.
If You Don't Know Follow This Guide : http://forum.xda-developers.com/showthread.php?t=2636231
Then Download HYD52ROM_V5.Zip + Gapps + Superuser + V6 Patch
Copy All Of Them To Your SDCard (Not To Dload)
Then Follow Instructions In TWRP Recovery.
Click to expand...
Click to collapse
I think get it. I will get back to you when I'm done. Thanks a lot.
I'm on B125 and I've seen a HYD52ROM for B125.
Could you explain me how to install it on my device?
It's my first custom Rom for the P6.
Thank you very much!!
Inviato dal mio HUAWEI P6-U06 utilizzando Tapatalk
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.
I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app
Install this Original_Recovery
You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...
ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?
pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?
pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:
Thanks ,,,,, it works :good:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse
I can't download from that link. anybody knows another link ?Thank you !
Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
thanks !!!
Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?
Hello everyone
Please help me!
I just did kdz flash to the new 4.4.2 kitkat kdz(F180L).
It done it and everything works but:
1)No root + framaroot isnt working
2)No recovery mode! At all! Even not the basic recovery!
Please I need your help to install somehow recovery mode..!
Please please Help me with it!
Thanks alot
http://forum.xda-developers.com/showthread.php?t=2434917&page=10
Check post 97 , this member has rooted after upgrade to KK you can ask him the procedure.
After rooting download freege itll unlock bootloader and will install custom recovery , CWM or TWRP (CWM recommended)
Ahmed Xperia p said:
http://forum.xda-developers.com/showthread.php?t=2434917&page=10
Check post 97 , this member has rooted after upgrade to KK you can ask him the procedure.
After rooting download freege itll unlock bootloader and will install custom recovery , CWM or TWRP (CWM recommended)
Click to expand...
Click to collapse
BUT I cant root too, Like I said.. I tried alot of methods for it already..
Please someone save me from it!
SABman12 said:
BUT I cant root too, Like I said.. I tried alot of methods for it already..
Please someone save me from it!
Click to expand...
Click to collapse
Why don't you flash JB kdz? You don't have to wipe anything if you updated to official kitkat if that's why you are so worried
Sent from my LG-E975 using Tapatalk
roscatel said:
Why don't you flash JB kdz? You don't have to wipe anything if you updated to official kitkat if that's why you are so worried
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
if ill install JB kdz, how ill update to officail kitkat? I no need to flash kdz of kitkat? there is another way?
SABman12 said:
if ill install JB kdz, how ill update to officail kitkat? I no need to flash kdz of kitkat? there is another way?
Click to expand...
Click to collapse
There are a lot of custom kitkat roms which you can flash in recovery mode. Check general forum and chose one you like.
Sent from my LG-E975 using Tapatalk
I am on kitkat and i rooted with safe root. and u can go into recovery with a quick boot type app or adb command. Mine also dont go into stock recovery with hard keys
Sent from my LG-F180L Stock Kitkat 4.4.2 using XDA Free mobile app
Hi,
i have now B708 Repack NeoArnet.V3 rom
and i wand to root, so i will be able to use more local.
how can i flash TWRP recovery?
i saw this
http://forum.xda-developers.com/showthread.php?t=2636231
but its write there "Your phone needs to be on either KitKat Beta, B118CN or B120CN"
how can i do that?
Thanks
eliavav1 said:
Hi,
i have now B708 Repack NeoArnet.V3 rom
and i wand to root, so i will be able to use more local.
how can i flash TWRP recovery?
i saw this
http://forum.xda-developers.com/showthread.php?t=2636231
but its write there "Your phone needs to be on either KitKat Beta, B118CN or B120CN"
how can i do that?
Thanks
Click to expand...
Click to collapse
Download that twrp img and make sure you have installed last drivers.
After that follow those commands
adb reboot bootloader
fastboot flash recovery "recoveryname.img"
fastboot reboot
And you are done.
This "recoveryname.img" is twrp recovery name,put it without quotes.
Sent from my HUAWEI P6-U06 using XDA mobile app
Hi,
Just to make sure,
You are sure that i can do it when my p6 have b708 rom?
And not KitKat Beta, B118CN or B120CN?
I never flash recovery to my p6 before.
Or, there is another way to get root?
Thank again
eliavav1 said:
Hi,
Just to make sure,
You are sure that i can do it when my p6 have b708 rom?
And not KitKat Beta, B118CN or B120CN?
I never flash recovery to my p6 before.
Or, there is another way to get root?
Thank again
Click to expand...
Click to collapse
Only way to root B707/708/709 is with TWRP. Just follow that instructions and don't worry
Sent from my HUAWEI P6-U06 using XDA mobile app
Work perfectly,
Thanks a lot.