Related
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
According to the latest reports we received from our readers, Huawei is finally pushing out official Android 4.4 update for people in some European countries such as Hungary,Romania and Czech Republic. This new B510 update seems to be the same one pushed to registered beta testers in Germany not too long ago. There is speculation and rumors going on that Huawei rushed and outed the beta firmware as official one, but knowing Huawei’s numbering scheme B510 still could be the final official one intended for release in Europe.
Here are some details about this official firmware
Compatible Model – Ascend P6-U06
Firmware version – B510
Android version – 4.4.2 KitKat
Emotion UI version – EMUI 2.3
Kernel version – 3.0.8-00787
Size – 775MB
Region – Europe
English language is included
We won’t go through describing the changelog here because you guys have probably know the changes by now because of the leaked and official Chinese firmwares. Basically this update brings the new EMUI 2.3 user interface and few new software additions to the camera and power saving features.
Again we still don’t know why Huawei pushed B510 firmware as a beta one to Germany and as a official one to others. The download file below is obtained from the official B510 release and not the B510 German beta release. So if future proves that both B510 aren’t the same you can be rest assured that we have provided you the official release.
Make sure that you are running B132 firmware before installing this new B510 release. This B510 was pushed to the users running official B132 firmware http://huaweinews.com/2014/03/ascend-p6-b132-firmware/ and early adopters of B510 reported us that B510 won’t install correctly as the previous leaked KitKat firmwares unless you are running B132 prior installing B510.
Download link - http://dl.huaweinews.com/Roms/Ascend-P6/B510.zip
Please report the issues and your thoughts about this firmware in the comments below so other readers will be aware of it.
Source: http://huaweinews.com/
please can someone create a zip file so that we can flash through TWRP? im finding it really hard to downgrade !!
+1
arabic
dose it include Arabic keyboard
How we can delete the Omni ROM and go back to B132 in order to try this release ??
yes...if someone can do what Reyncla did..and make a b132 if not the original b510 (the one here) that we can flash from twrp...that would be nice
i am trying to get the original rom on to the phone and it doesn't work...maybe i am not using the correct recovery for the correct rom ..i do not know..i will keep trying and tell you guys if it works
I cannot update to 510, i'm on b132... i tried OTA update and local update, none work for me...when it boots in recovery mode i get an error 7 something about music2.apk...i tried the download link ota download...but nothing...same error. I tried factory reset, wipe cache partition...still nothing...any ideas?
Hello !
This update work only for Stock Huawei Firmware B132 JB and also for Stock Huawei Beta B510 KitKat !
If you have issue to update from this two stock firmware, it seems that your stock rom in your device was modified , so you should put all the files back .
For all device already updated to KitKat but not Beta 510 , you can downgrade by installing a intermediate step ( update.app ) . Only now you are able to flash Stock B132 UPDATE.APP by /dload method .
For all device already updated to OmniROM KitKat 4.4.3, you can directly downgrade to B132 ( without install intermediate step update.app ) .
Put UPDATE.APP from Stock B132 in external sdcard/dload directory, also you should put back stock boot.img & recovery.img ( for B506 ) from second post TWRP 2.7.0.0 ! After these three steps you can downgrade by pressing combo key . ( Before put back stock recovery from B506, please go to TWRP recovery and wipe : cache, dalvik-cache, cust, data & system ) .
Good luck !
surdu_petru said:
Hello !
This update work only for Stock Huawei Firmware B132 JB and also for Stock Huawei Beta B510 KitKat !
If you have issue to update from this two stock firmware, it seems that your stock rom in your device was modified , so you should put all the files back .
For all device already updated to KitKat but not Beta 510 , you can downgrade by installing a intermediate step ( update.app ) . Only now you are able to flash Stock B132 UPDATE.APP by /dload method .
For all device already updated to OmniROM KitKat 4.4.3, you can directly downgrade to B132 ( without install intermediate step update.app ) .
Put UPDATE.APP from Stock B132 in external sdcard/dload directory, also you should put back stock boot.img & recovery.img ( for B506 ) from second post TWRP 2.7.0.0 ! After these three steps you can downgrade by pressing combo key . ( Before put back stock recovery from B506, please go to TWRP recovery and wipe : cache, dalvik-cache, cust, data & system ) .
Good luck !
Click to expand...
Click to collapse
hello...again...since i posted on other threads and now i see that u posted the way to go to stock here....i will post here my problem
so...i am on OmniROM KitKat 4.4.3 with TWRP 2.7.0.0
did a wipe for all the shiet except external card
than flashed B506 stock .img and recovery.img(in this order) than reboot
now...with a new 8gb sdhc10 from sandisk formated in fat 32 with the folder dload wich contains B132 UPDATE.APP i boot in recovery
and fail
so what do i have to do now..causei red all the forum..did all the tricks...and nothing
any ideea will be apreciated
thanks boys
cyocady said:
hello...again...since i posted on other threads and now i see that u posted the way to go to stock here....i will post here my problem
so...i am on OmniROM KitKat 4.4.3 with TWRP 2.7.0.0
did a wipe for all the shiet except external card
than flashed B506 stock .img and recovery.img(in this order) than reboot
now...with a new 8gb sdhc10 from sandisk formated in fat 32 with the folder dload wich contains B132 UPDATE.APP i boot in recovery
and fail
so what do i have to do now..causei red all the forum..did all the tricks...and nothing
any ideea will be apreciated
thanks boys
Click to expand...
Click to collapse
Nop, you shouldn't wipe Internal Storage on TWRP ! I already downgraded ( and more than once ) from OmniROM 4.4.3 directaly to UPDATE.APP from B132, but wiped all without Internal and External Storage .
Now , you can try with intermediate UPDATE.APP before flash UPDATE.APP from B132.
Good luck .
Does anyone knows about the B610 4.2 -> kitkat update schedule?
kvarga said:
Does anyone knows about the B610 4.2 -> kitkat update schedule?
Click to expand...
Click to collapse
B610 4.2 ?
4.2 is JellyBean
KitKat is 4.4
surdu_petru said:
Nop, you shouldn't wipe Internal Storage on TWRP ! I already downgraded ( and more than once ) from OmniROM 4.4.3 directaly to UPDATE.APP from B132, but wiped all without Internal and External Storage .
Now , you can try with intermediate UPDATE.APP before flash UPDATE.APP from B132.
Good luck .
Click to expand...
Click to collapse
i tried that ...with no success...twrp with any rom i poot in it works but original recovery not...
from omni there is not possibility to update the normal way
i allso installed with twrp KK_ Huawei P6__International-BbN _ SLMINSK repack_CN and after that flashed b510 recovery...from here tried to update the normal way with the intermediate ...and allso ful update.app...with no luck
i understand that my mistake was wipeing the internal storage
if there is a fix to all this i am all years...eyes
thanks
cyocady said:
i tried that ...with no success...twrp with any rom i poot in it works but original recovery not...
from omni there is not possibility to update the normal way
i allso installed with twrp KK_ Huawei P6__International-BbN _ SLMINSK repack_CN and after that flashed b510 recovery...from here tried to update the normal way with the intermediate ...and allso ful update.app...with no luck
i understand that my mistake was wipeing the internal storage
if there is a fix to all this i am all years...eyes
thanks
Click to expand...
Click to collapse
Ok, why not try reinstalling OmniROM 4.4.3, and then to start again to downgrade ?
surdu_petru said:
Ok, why not try reinstalling OmniROM 4.4.3, and then to start again to downgrade ?
Click to expand...
Click to collapse
well...i did that of course...with no success...since u can't do a normal dload/UPDATE.APP from OmnROM 4.4.3
i do not know what am i doing wrong
but i bet is something stupid and simple
cyocady said:
well...i did that of course...with no success...since u can't do a normal dload/UPDATE.APP from OmnROM 4.4.3
i do not know what am i doing wrong
but i bet is something stupid and simple
Click to expand...
Click to collapse
Is very simple mate, but I don't know if you understand ..
So, please put OmniROM 4.4.3 on your device !
- copy UPDATE.APP from B132 to external sdcard/dload folder ;
- go to TWRP and wipe : cache, dalvik-cache, data , cust & system !
- reboot to bootloader from TWRP !
- flash stock boot.img from B506CN ( fastboot flash boot boot.img )
- flash stock recovery.img B506CN ( fastboot flash recovery recovery.img )
- reboot your device ( fastboot reboot )
- now try to flash UPDATE.APP by combo key !
That's all -> now you are on Stock B132 !
surdu_petru said:
Is very simple mate, but I don't know if you understand ..
So, please put OmniROM 4.4.3 on your device !
- copy UPDATE.APP from B132 to external sdcard/dload folder ;
- go to TWRP and wipe : cache, dalvik-cache, data , cust & system !
- reboot to bootloader from TWRP !
- flash stock boot.img from B506CN ( fastboot flash boot boot.img )
- flash stock recovery.img B506CN ( fastboot flash recovery recovery.img )
- reboot your device ( fastboot reboot )
- now try to flash UPDATE.APP by combo key !
That's all -> now you are on Stock B132 !
Click to expand...
Click to collapse
this is getting frustrating now
i will tell u exactly what i did
i have TWRP 2.7.0.0 with OmniROM 4.4.3 on my device
i boot recovery to TWRP by pressing power and +-vol and i go and wipe/advanced and check the boxes:cache, dalvik-cache, data , custom storage & system , than reboot in bootloader
go and flash boot and recovery B506 that i found om the OmniROM page...the ones under the B510
reboot and go to recovery by pressing power and +-vol
and FAILL
so what did i do wrong now?
I was asking about the update from B610 JB to KitKat. It seems this software version have not recieved Kitkat yet.
update from B510 beta
please can anyone tell me how to upgrade it ...
i have the B510 beta on my phone
aslomax said:
please can anyone tell me how to upgrade it ...
i have the B510 beta on my phone
Click to expand...
Click to collapse
Unzip the zip file to the SD card and select Local Update
Hi guys on my european Ascend P6 (B512) I have to install MIUI.. To install miui I have to insta ll B508! How do I install B508? Can I install it directly starting from B512?
suenky91 said:
Hi guys on my european Ascend P6 (B512) I have to install MIUI.. To install miui I have to insta ll B508! How do I install B508? Can I install it directly starting from B512?
Click to expand...
Click to collapse
I did that and no problem at all. You have to have stock recovery and make a factory reset with stock recovery after the update otherwise your system partition is to small.
taaeem said:
I did that and no problem at all. You have to have stock recovery and make a factory reset with stock recovery after the update otherwise your system partition is to small.
Click to expand...
Click to collapse
And if I wanted to go back to the B512 from MIUI as you do? Also how should I install the TWRP ,TWRP for B506 or B510?
suenky91 said:
And if I wanted to go back to the B512 from MIUI as you do? Also how should I install the TWRP ,TWRP for B506 or B510?
Click to expand...
Click to collapse
If you want to go back just make all things in the other way around
And there is no TWRP for B510 and a different for B508 it's all the same, just use TWRP for KitKat.
Since everybody knows how to upgrade OTA or from LOCAL UPGRADE and go from 4.2 to 4.4 I've decided to let you know how to easily downgrade from 4.4 to 4.2 AND / OR change from Chinese to International Huawei Firmware!
The method I describe here, I've found in some German forums after long search. It really works! 100% tested on my device Ascend P6-U06!
!!! CAUTION !!!
Before you begin, you must be sure you have STOCK recovery, NOT TWRP one!!! This flashable files work and can be flashed only thru STOCK recovery!
If you have TWRP recovery and don't know how to go back to STOCK one, look the SECOND POST in THIS thread and follow the steps there, before you begin this procedure! ONLY after you're done with turning back your STOCK recovery and you're sure of that, you can continue with the following steps:
To Downgrade from Android 4.4 to Android 4.2 / Switch from Chinese to International ROM, do the following:
1. Download this (Unicom 2.0 Downgrade Flashable ZIP) and flash it thru STOCK RECOVERY - https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
This is a 240MB archive, also known as Unicom 2.0 - something like ROM, but it is not an entire ROM, but just part of it, that must be flashed thru stock recovery. You must unzip it, take the dload folder that is inside and put it on you sdcard. Than you can flash it like a local update thru the updater, or you can forcefully flash it - pres power+ volume down+ volume up and it will take you directly to flashing updates thru stock recovery. When you flashed it, you can once again boot normally into you Android device. Now you must take dload folder from the B132 zip (from the link below), once again put it on your sdcard and flash it again using the same methods again thru stock recovery. The cool thing is that the first little flashable zip allows you not just to downgrade from 4.4 to 4.2, but also change from China to International ROMs. So when you're finished flashing this thru stock recovery, flash the official international B125 or B132, wait for the system to install and boot into android. When it is finally booted, you can flash B510 or B512/513 - whatever you want. In my case when I downgraded to B132, after the first boot the system prompted me, that it can be updated directly to B520 OTA. I've updated and now I am once again with International firmware
2. Download this (B132 International 4.2 Firmware) and flash it thru STOCK RECOVERY ONLY if you already flashed the file in the step above! - https://mega.co.nz/#!5JkAzKpB!nFqfHIHfWo6EO4XPqjO3Gga6a3XWWnqqZxZDZpzAdWE
3. Boot into Official Huawei Android 4.2 firmware and check for update OTA. If you have one - install it. If you don't - you can flash B510 or B512/513/etc...
Enjoy International firmware line again! This method can also be used just to downgrade form Android 4.4 to Android 4.2!
Files are not flashable thru TWRP - please, use ONLY Stock Recovery!
------------------------------------------------------------------------------------------
Please, hit THANKS, if this thread helped you!
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
blueIBI said:
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
Click to expand...
Click to collapse
Just try with the stock B510 recovery from the second post in the TWRP recovery theme! I think stock recovery is the same for all 4.4 ROMs and it doesn't matter which one. I recommend the one that I told you about! Should work! I was with Chinese B706 ROM and TWRP. To downgrade I've flashed the B510 stock recovery first and then - step by step as I wrote above.
thanks..will try to do that..
blueIBI said:
thanks..will try to do that..
Click to expand...
Click to collapse
I have a question for you - I see that you modified the .prop file for the local channel, to get louder sound in headphones (from your signature). I've tried to do this today, but when I try to modify the file every time it says - cannot save changes, file cannot be modified, changes not saved! I have root and I've mounted / and /system as writable! I can edit build.pro without any problem and save the changes, but this file - I can't! How did you edited it and how can I edit it too?
Thank you!
UP!
Moderators, please consider to make this thread sticky / important! Thank you!
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
blueIBI said:
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
Click to expand...
Click to collapse
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
blueIBI said:
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
Click to expand...
Click to collapse
You're welcome!
ThunderBird891 said:
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
Click to expand...
Click to collapse
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
macklon said:
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
ThunderBird891 said:
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
Click to expand...
Click to collapse
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
macklon said:
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
That's right! Download the official B706 from Huawei EMUI website, unzip it, put the dload folder in you sdcard and then i recomend to make Local update first. If it doesn't want to update thru local update option in the Update Application, then try with forceful update - press and hold power + volume up + volume down and wait until phone boots into stock recovery mode! The update can only be done with stock recovery! If you're on TWRP, that you must go back to stock!
**** uc browser sucks
I kept to download b508 due to some problem I have to pause it only 36mb was remaining and when I resumed it showed a error was not able to resume the download so I re downloaded the b508 it got downloaded now
So kept to download b706 the same thing happened only 50mb was remaining for the download to complete it showed a error again but this time I did even pause ****
And now someone told me we can update b706 on b512 no need of b508 ****
Today ill download b706 on chrome
Sent from my HUAWEI P6-U06
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
gabrymed said:
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
Click to expand...
Click to collapse
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
ThunderBird891 said:
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
Click to expand...
Click to collapse
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
gabrymed said:
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
Click to expand...
Click to collapse
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
ThunderBird891 said:
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
Click to expand...
Click to collapse
Ok,downgraded with success! Now i receive an OTA upgrade to western europe B520 but i think i'll wait for the moment...
Thanks ThunderBird for your help,very appreciate!
Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.
Downgrade
aknorts said:
Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.
Click to expand...
Click to collapse
Hello. try this.
Extract UPDATE.APP of B132 with huawei updateextractor,edit verlist.txt with notepad and add P6-U06V100R001C17B708 to
file and save it.now repack with huawei updateextractor choose folder that you extract UPDATE.APP in previous step.
copy new UPDATE.APP in dload folder of sdcard and update again with dload metod.
this is just an idea and im not sure if it workks.try and seee if it works.
Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?
probably same problem here
http://forum.xda-developers.com/ascend-p6/help/b708-root-flash-twrp-downgrade-t2991236
---------- Post added at 08:46 PM ---------- Previous post was at 08:11 PM ----------
try it!
i will test it too
http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
give me feedback
I tried it before, I didn't work for me.
aknorts said:
Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?
Click to expand...
Click to collapse
Flash cust,img of B132 in fastboot mode ( fastboot flash cust 12.cust.img) then flash UPDATE.APP.if you get error again,
repack without cust.img and flash generated UPDATE.APP,hope this work.
Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.
HELP !!!
aknorts said:
Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.
Click to expand...
Click to collapse
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!
Laske1982 said:
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!
Click to expand...
Click to collapse
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it
dream_fun said:
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it
Click to expand...
Click to collapse
Can you post the link of that procedure ?
Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.
ipred said:
Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.
Click to expand...
Click to collapse
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!
Stuck on Huawei logo
Laske1982 said:
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!
Click to expand...
Click to collapse
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
With B132 in dload folder perform a Hard Format
Power Button + Volume up key + Volume down key.
Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
Hi Jacques
Did you come right with this?
actually this huawei updateextractor thing work with every firmware of p6 just check your current build number and paste in verlist file through notepad
does anyone knows why my phone wont boot with the huawei logo, instead i get the android one, i just downgrade to b706 from b708 and still get the same android logo