Dear XDA-developers,
I have a Ascend P6 with Omni ROM Stable ][Update 15/05/2014] (Clean install)
SUPPER GREAT ROM By the Way!
Thanks ! surdu_petru (and all contributors)
But i have 1 problem..
I use me phone also as player for spotify in the car (Bleutooth Audio)
All music source hiccups while playing (it looks like some soort of buffering)
This problem was fix in the original rom bij disabeling wifi.
In the OmniRom (version before this 1) it was fix bij using ART.
I tryed all this but stil no improvements.
Lookt all over the forum but no fix
Please help!
Also with the new update.
Verstuurd van mijn P6-U06 met XDA-FORUM, mogelijk gemaakt door appyet.com
Looks like i fixed it.
Omni 25-05-2014
ART & On the wifi advanced settings, I set it to never sleep and disabled battery optimization
today I took a new SIM card which enables 4G service on my carrier (Tele2 Croatia). 4G is working fine but WiFi connection keeps turning itself on even if I turn it off via dropdown or in settings. if I set network mode to GSM/WCDMA/Auto I get 3G network and wifi stays off. the moment I set it back to GSM/WCDMA/LTE/Auto I get 4G but wifi starts acting up again.
I'm on autoprime's stock MM and Xceed kernel. with old SIM card that never happened. anyone know what's this all about? my carrier told me to check with LG Support eek...
EDIT: nope, even setting it to GSM/WCDMA/Auto doesn't do the trick.
Install the newest Rom and the best kernel for - of course. And the problem will gone I think.
But First turn OFF WiFi in hide menu check this out. I'm not sure but probably it'll work. I'm from 3 months on NOTE 4 so I forgot many things.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
adamzki2013 said:
Install the newest Rom and the best kernel for - of course. And the problem will gone I think.
But First turn OFF WiFi in hide menu check this out. I'm not sure but probably it'll work. I'm from 3 months on NOTE 4 so I forgot many things.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
already did that. newest MM rom and Xceed kernel. it could be compatibility issue with new SIM and MM, since I restored my LP backup just to check it out, and it was all fine... damn!!
But lp or kk. Not the mm. Mm is a bad idea. Try this: http://forum.xda-developers.com/lg-g3/development/stock-t2961073 but the v20p Rom it's best choice in my opinion.
Or v20h than xposed etc.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Hi,
I have a bluetooth mac-address problem.
I use the custom rom dotOS1.2 with my Lenovo p2a42
(I don’t wont to change my rom.)
I have a bluetooth mac-address issues and the thread of the dotOS-rom is closed.
My bluetooth mac-adress is: cc:61:e5:49:a3:81 and this mac-address wont be read right. Instead of the right address it takes 00:00:00:00:5a:ad
I found the following link: r e v i e w . l i n e a g e o s . o r g / # / c / 1 8 3 0 2 1 /
But I dont know how to fix my dotOS rom.
It works with the aokp rom correct, but I need fingeprint gestures and I wont change my rom.
I tried to take some files from the aokp rom like: hci_qcomm_init but it does not change anything.
I tried to install xposed framework to change my mac-address, but … it does not work either.
My wife uses the same dotOS ROM with another device,but the mac adress is the same, so we have a problem to connect our devices to the car via bluetooth.
Thx
Speedy10061975 said:
Hi,
I have a bluetooth mac-address problem.
I use the custom rom dotOS1.2 with my Lenovo p2a42
(I don’t wont to change my rom.)
I have a bluetooth mac-address issues and the thread of the dotOS-rom is closed.
My bluetooth mac-adress is: cc:61:e5:49:a3:81 and this mac-address wont be read right. Instead of the right address it takes 00:00:00:00:5a:ad
I found the following link: r e v i e w . l i n e a g e o s . o r g / # / c / 1 8 3 0 2 1 /
But I dont know how to fix my dotOS rom.
It works with the aokp rom correct, but I need fingeprint gestures and I wont change my rom.
I tried to take some files from the aokp rom like: hci_qcomm_init but it does not change anything.
I tried to install xposed framework to change my mac-address, but … it does not work either.
My wife uses the same dotOS ROM with another device,but the mac adress is the same, so we have a problem to connect our devices to the car via bluetooth.
Thx
Click to expand...
Click to collapse
Are you flashing magma kernel with it,
if yes then that's the problem.
i had the same problem
No, the kernel is: 3.18.31 lineageos-ge72c5036 [email protected] #1
I have found a Lineage OS Update dated on february. Now it works.
There was a bluetooth mac issues solved.
Hey - I have lately tested almost all GSI roms on Moto Z Play - if I share my experience and prepare a guide would it be usefull for somebody ?
reserved
Would be useful for me because i don't know how to do it!!
sebx_g1 said:
Hey - I have lately tested almost all GSI roms on Moto Z Play - if I share my experience and prepare a guide would it be usefull for smoebody ?
Click to expand...
Click to collapse
Sure, would be usefull :good: it's probably the future of custom rom, for the good or the bad ...
i just have read few articles for now, but I have not tested yet
if i understand well, when the device is not treble ready the most difficult part is to have vendors adapted to trebble, once you have the vendors, you just have to flash the GSI (only system), and then you will still have some issues with BT and autobrightness
Poll question is the same as post question in fact
Would be very interessting for me, cause I know to litte about it.
Moved to Q and A - if you are going to do a Guide, do a Guide with some usable content..
Otherwise, it's just a question...
LenAsh said:
Moved to Q and A - if you are going to do a Guide, do a Guide with some usable content..
Otherwise, it's just a question...
Click to expand...
Click to collapse
Guide is under construction ... day or two and it will be published here .
Moderator Edit: if the complete usable Guide appears, we can move this thread to the appropriate Forum.
sebx_g1 said:
Guide is under construction ... day or two and it will be published here .
Moderator Edit: if the complete usable Guide appears, we can move this thread to the appropriate Forum.
Click to expand...
Click to collapse
I am working on guide but it is more complicated that I thouht [emoji848].
I was thinking that from user side I knew GSI roms quite well, but new set of them ruined my knowledge a bit. More I use them less understand them [emoji19][emoji12]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
I am working on guide but it is more complicated that I thouht [emoji848].
I was thinking that from user side I knew GSI roms quite well, but new set of them ruined my knowledge a bit. More I use them less understand them [emoji19][emoji12]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Do you know how to get camera working on GSI?
I tried using Xperience and CosmicOS as base (on Oreo) but it doesn't work in any of them.
Learning how to install a GSI isn't that difficult (okay, you have to search a little until you find something, but there's information), but get hardware-related things working is the impossible part (really searched but I didn't find nothing about it).
Use magisk module Google_Camera_Fix-v4.
After use pls. report how it's work in your configuration :vendor+GSI
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
sebx_g1 said:
Use magisk module Google_Camera_Fix-v4.
After use pls. report how it's work in your configuration :vendor+GSI
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Can u provide a link for that
you should write how to do it, for example which base you use, how to fix some things, which modules for magisk you use etc , which magisk you use.
good to see this.
Good luck!
sebx_g1 said:
Use magisk module Google_Camera_Fix-v4.
After use pls. report how it's work in your configuration :vendor+GSI
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
I didn't find the v4, only v1, but really thanks for telling everyone about the module.
I tested some builds of CosmicOS as vendor (including the last one available on its topic) with LineageOS 16.0 and ArrowOS, but camera wasn't working even with the module installed.
So I tried XPerience 12.1 (Oreo, the last avaible update) with the same GSIs and the module. This time the camera got to work, but NFC was dead (I'm not sure if the NFC problem is related to the GSI or vendor, maybe both?).
TeamMex said:
you should write how to do it, for example which base you use, how to fix some things, which modules for magisk you use etc , which magisk you use.
good to see this.
Good luck!
Click to expand...
Click to collapse
Yeah , but I must postpone this - I am a little bit fed up with GSI - nfc , BT work or don't work (rather not together) all the time problems also with adaptivebrightness .
GSI is for geeks only :/ not for newbies so for a guide is to early in my opinion .
There is significant advance in GSI development now - latest roms are usable on MZP [emoji6], I am testing two of them.
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Some issues with BT and autobrightness in Android pie
fablebreton said:
Sure, would be usefull :good: it's probably the future of custom rom, for the good or the bad ...
i just have read few articles for now, but I have not tested yet
if i understand well, when the device is not treble ready the most difficult part is to have vendors adapted to trebble, once you have the vendors, you just have to flash the GSI (only system), and then you will still have some issues with BT and autobrightness
Click to expand...
Click to collapse
Does someone know how to fix the issues with BT and auto-brightness and flashlight after an update the Android 8.1 to 9 using the method treble? I added all files how was to explained in the tutorial..
Still all is messed up with gsi's on moto z play - most close to full functionality is OOS ver. 0.7 with xpe 13 as vendor but build 26/02 + Juniiim's patches -- still no NFC there and possibly buggy somtimes BT .
@Juniiim maybe it would be good idea to put your patches for gsi in this thread together with some info how to use it ? It is better to keep TeamMEX XPE thread clean .
Almost got it.. Gsi on Moto Z Play - Descendant TwoDotOne - Liquid Remix GSI (february build) .... I am making final tests day or two and if all will be OK I put here short guide how to setup...
So for now -- wifi , RIL (LTE+), bluetooth ,nfc ,gps- works
Will be needed later (kernel tweak) ->
su
echo 0 > /sys/kernel/alessa_plug/hotplug_enabled
Hal3 fully enabled[emoji106] .
I suppose that xpe builds after 19/06 have broken Bluetooth in GSI : / This build should be archivised and kept safe forever Its sources are probably overwriten many times already :/
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
@sebx_g1 if you like I can collaborate in your guide, I currently use base Xpe 20/03 with gsi GSI oos everything works fine Bluetooth, calls, camera, wifi and brightness
Hello every body
First, tanks a lot to developpers for there job.
Now, my trouble : I want to extend the 32Go internal storage of my redmi note 8T. Also I have installed custom roms (PIE, Lineage, Arrow, Xtended, etc.)
But with ALL android 11 or 12, it's impossible to format the SD card as internal storage. There's an error and the SD card become "corrupted".
Please, heeeeeeeelp
Thank you all.
-------
Salut tout le monde,
d'abord merci aux développeurs pour leur job : c'est top
Ensuite mon problème : je souhaite étendre la mémoire interne de mon redmi note 8T (32Go). Pour cela j'ai installé des custom rom et je tente de formater la carte SD comme mémoire interne. Et là : erreur. Toutes les rom en android 11 et 12 plantent. Impossible de formater la carte qui apparait ensuite comme "corrupted".
Dommmmmage. Une idée ?
Merci d'avance !
mpadnsi said:
...
Click to expand...
Click to collapse
Use search !
Thanks.
But it's not exactly my problem. I know how to split SD card with ADB and so on... with Android 10. It is working well without having a rooted phone !
My trouble is only with Android 11 and more...
Do you confirm me that with a rooted phone it will work ?
mpadnsi said:
Thanks.
But it's not exactly my problem. I know how to split SD card with ADB and so on... with Android 10. It is working well without having a rooted phone !
My trouble is only with Android 11 and more...
Do you confirm me that with a rooted phone it will work ?
Click to expand...
Click to collapse
That is A11/12 problem
everything work fine in A10
loopypalm said:
That is A11/12 problem
everything work fine in A10
Click to expand...
Click to collapse
Thanks for your reply.
Poor of me... I hope that a solution is going to appear. I have seen that you suggest using RRos, but my tests (without being root) were not good with my SDcard as internal storage (apps like Snapchat...). Actually I'm using an old A10 pixel plus edition (2020/12)(no updates....)
Thanks again
mpadnsi said:
I have seen that you suggest using RRos, but my tests (without being root) were not good with my SDcard as internal storage (apps like Snapchat...)
Click to expand...
Click to collapse
This mostly depend on the SDcard write/read speed and not the rom you use.
i'm on rros and i use SDcard but not for apps and everything work fine ...
if you are out of space try this :
install the app you want
copy it's folder from Data/app/
paste it in System/app or priv-app
unistall
reboot
the app will work faster than ext sdcard (because it's from system partition) but it's data will be on /data
not a perfect solution but better ...
if you move everything to system you will have more space but keep in mind that not all apps support this and for some you will have to give permission manually ...
Thanks you. l will keep your answer in mind if !
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Mattiam2 said:
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Click to expand...
Click to collapse
A11/12/13 = trash
try switching SElinux from "enforcing" to "permissive" if you want to stick with trash ...
Mattiam2 said:
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Click to expand...
Click to collapse
i also have the exact same problem, still looking for a solution