Hello every body
First, tanks a lot to developpers for there job.
Now, my trouble : I want to extend the 32Go internal storage of my redmi note 8T. Also I have installed custom roms (PIE, Lineage, Arrow, Xtended, etc.)
But with ALL android 11 or 12, it's impossible to format the SD card as internal storage. There's an error and the SD card become "corrupted".
Please, heeeeeeeelp
Thank you all.
-------
Salut tout le monde,
d'abord merci aux développeurs pour leur job : c'est top
Ensuite mon problème : je souhaite étendre la mémoire interne de mon redmi note 8T (32Go). Pour cela j'ai installé des custom rom et je tente de formater la carte SD comme mémoire interne. Et là : erreur. Toutes les rom en android 11 et 12 plantent. Impossible de formater la carte qui apparait ensuite comme "corrupted".
Dommmmmage. Une idée ?
Merci d'avance !
mpadnsi said:
...
Click to expand...
Click to collapse
Use search !
Thanks.
But it's not exactly my problem. I know how to split SD card with ADB and so on... with Android 10. It is working well without having a rooted phone !
My trouble is only with Android 11 and more...
Do you confirm me that with a rooted phone it will work ?
mpadnsi said:
Thanks.
But it's not exactly my problem. I know how to split SD card with ADB and so on... with Android 10. It is working well without having a rooted phone !
My trouble is only with Android 11 and more...
Do you confirm me that with a rooted phone it will work ?
Click to expand...
Click to collapse
That is A11/12 problem
everything work fine in A10
loopypalm said:
That is A11/12 problem
everything work fine in A10
Click to expand...
Click to collapse
Thanks for your reply.
Poor of me... I hope that a solution is going to appear. I have seen that you suggest using RRos, but my tests (without being root) were not good with my SDcard as internal storage (apps like Snapchat...). Actually I'm using an old A10 pixel plus edition (2020/12)(no updates....)
Thanks again
mpadnsi said:
I have seen that you suggest using RRos, but my tests (without being root) were not good with my SDcard as internal storage (apps like Snapchat...)
Click to expand...
Click to collapse
This mostly depend on the SDcard write/read speed and not the rom you use.
i'm on rros and i use SDcard but not for apps and everything work fine ...
if you are out of space try this :
install the app you want
copy it's folder from Data/app/
paste it in System/app or priv-app
unistall
reboot
the app will work faster than ext sdcard (because it's from system partition) but it's data will be on /data
not a perfect solution but better ...
if you move everything to system you will have more space but keep in mind that not all apps support this and for some you will have to give permission manually ...
Thanks you. l will keep your answer in mind if !
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Mattiam2 said:
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Click to expand...
Click to collapse
A11/12/13 = trash
try switching SElinux from "enforcing" to "permissive" if you want to stick with trash ...
Mattiam2 said:
Same problem with all custom roms (Android 11 - 12) on Redmi Note 7. I get always bootloop when formatting the SD Card, and when it doesn't bootloop eventually after some days I lose all data for corruption. I always have to return to Android 10 :c
Click to expand...
Click to collapse
i also have the exact same problem, still looking for a solution
Related
Hi guys,
First of all, this work is not mine, is from @ycjeson, I found it here: MIUI 8 For LeEco Cool1.
I decided to start this thread, because any information about LeEco Cool1 is difficult to find and in the most part it is in Russian or Chinese...
Get to work!
Do not forget to make a DUMP of your primary system partitions (like IMEI). Trust me, do it!!!
1) Tutorial here;
2) Needed tools here.
Install TWRP Recovery from BB72TT
Tutorial and download links here!
Install MIUI 8 and make root
1) I recomend a full wipe (cache, dalvik, data, system);
2) Put MIUI 8 and Magisk v10.2 into internal SD Card;
3) Move Magisk v10.2 zip to '/cache' partition using file manager of TWRP;
4) Install MIUI 8 via TWRP;
5) Reboot system without wipe anything (first boot will be long);
6) Reboot to TWRP;
7) Flash Magisk v10.2 zip from '/cache' partition;
8) Reboot system (may be fast);
9) Install phh's root manager apk and Latest Magisk Manager apk.
Optional to remove encryption from '/data' partiton:
10) Wipe data and cache;
11) Reboot system (boot will be very long, be patience);
12) Put Magisk v10.2 into internal memory;
13) Fash Magisk v10.2 zip again;
14) Reboot system (may be fast);
15) Install phh's root manager apk and Latest Magisk Manager apk.
DOWNLOAD ROM
Magisk downloads and more informations here!
Well guys, if possible, say thanks to people who contribute to improving the LeEco Cool1 community:
BB72TT from "leeco.re" forum, for your precious TWRP recovery
partyheadgmailcom from "leeco.re" forum, for tutorials (DUMP and How to install TWRP Recovery)
@ycjeson for your precious MIUI 8
@topjohnwu for Magisk
@phhusson for Superuser
Other people I forgot to mention!
I hope it's useful! :highfive:
A big thanks for your idea of introducing the ROM here.
I own this device, it has a lot of potential from software development angle but unfortunately the lack of popularity for this device is one the main reasons why devs are not interested in developing custom ROMs
Also this device runs LE ECO EUI hence I hope Le eco will come up with some awesome updates (if not then hope someone takes the initiative for some custom ROMs specially a lineage OS ROM would be perfect)
Screen shot and bug report?
download link
please provide download link:fingers-crossed::fingers-crossed::fingers-crossed:
not work
abhipundir said:
please provide download link:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Try this link: download
chidosu said:
not work
Click to expand...
Click to collapse
If you performed the procedure as described, this works, I even tested it!
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Kaushikrex007 said:
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Click to expand...
Click to collapse
So, you can't flash gapps in MiUi based ROMs, because gapps is just for AOSP ROMs. Search in Google about Google apps for MiUi.
What are the bug reports?
Please report the detailed bug report of the ROM.
Kaushikrex007 said:
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Click to expand...
Click to collapse
did you see any camera bug???????????????and what is the android version
Roms c106 compatible model c106-9?
Enviado desde mi Redmi Note 3 mediante Tapatalk
maligno1 said:
Roms c106 compatible model c106-9?
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
I think not.
Why am I losing signal at certain times? While phone calling it's shutting suddenly.
reddsmokee said:
Why am I losing signal at certain times? While phone calling it's shutting suddenly.
Click to expand...
Click to collapse
Had that issue too.. Roms bug
ceraklija said:
Had that issue too.. Roms bug
Click to expand...
Click to collapse
Thank you friend your reply. So is there any update without this issue?
reddsmokee said:
Thank you friend your reply. So is there any update without this issue?
Click to expand...
Click to collapse
I think no, the lastest version is the one from december.
Miui9 leeco cool1
http://bbs.7to.cn/thread-320449-1-1.html
sost_xda said:
Miui9 leeco cool1
http://bbs.7to.cn/thread-320449-1-1.html
Click to expand...
Click to collapse
Thank you for sharing. But a few question i have.
Does fingerprint unlock and 3g-4g internet work?
Because as i understand it, i'm confused.
Can I install it on my c103 device
Hi, my Mi 5S has some issues I can't solve.
It has a lot of lags, all the scroll operations are bad looking and it's really slow to do anything.
Facebook crashes after some seconds of use and so some other apps.
I tried with MIUI Global Stable, MIUI eu, MIUI it, Lineage Unofficial and so on, but I still have the same problems.
The fingerprint works very bad with every rom and I don't know how to solve all this problems.
Could it be an hardware problem? How can I test it in that case?
Thanks.
Flash the stock China Dev beta and full wipe everything then flash the latest multirom.me and your done
XMoDuLeSx said:
Flash the stock China Dev beta and full wipe everything then flash the latest multirom.me and your done
Click to expand...
Click to collapse
Can I find it here on XDA? Does multirom.me have Italian language?
Could you provide a link?
https://mirror.byteturtle.eu/multirom/ here u go, Sunday new dev update will be out.
XMoDuLeSx said:
Flash the stock China Dev beta and full wipe everything then flash the latest multirom.me and your done
Click to expand...
Click to collapse
XMoDuLeSx said:
https://mirror.byteturtle.eu/multirom/ here u go, Sunday new dev update will be out.
Click to expand...
Click to collapse
It's amazing, but the phone isn't mine. It's my mum smartphone and she doesn't speak english. Miui Eu and Miui IT are laggy and full of bugs at the moment, I'm looking for something custom, do you know some rom with Italian or the possibility to add it?
Thanks
I think it's not a good idea putting a dev ROM on your mum smartphone.
Why you say miui.it it is full of bugs ?
I use it everyday, no problems, fast as expected.
gnazio said:
I think it's not a good idea putting a dev ROM on your mum smartphone.
Click to expand...
Click to collapse
If the dev ROM works in a nice way why not? I just flashed miui.eu and It's full of lag and crash from the first boot.
fblasot said:
Why you say miui.it it is full of bugs ?
I use it everyday, no problems, fast as expected.
Click to expand...
Click to collapse
Non nel mio caso, ho provato anche la eu e lagga da far paura.
Did you try with a factory reset?
Factory reset, flash OOS and I had no camera. Used MSM to revert fully to TMO stock. Still no camera, any thoughts?
Apkmirror.... Just make sure you pick the correct version
i2andog said:
Apkmirror.... Just make sure you pick the correct version
Click to expand...
Click to collapse
Ended up figuring it out. The camera apk was installed, but the camera wasn't showing anything and itd FC. Backed up the persist.img from my wife's phone and flashed it and that fixed it. So..... IF YOUR CAMERA/FLASHLIGHT don't work even after using MSM... it's your persist.img. Hopefully this helps someone in the future
Bonjour pouvez-vous me donner votre fichier persist.img s'il vous plaît. J'en ai besoin pour mon un plus 7t
Hello can you give me your persist.img file please. I need it for my one plus 7t
LineageOS 18.1, see this link
Installation instructions :
- Download the zip(s).
- Install latest TWRP for clover
- Perform a backup of your current ROM (optional)
- Wipe dalvik/cache (upgrade from lineageos 18.1) and wipe system/data if upgrade from other rom.
- Flash ROM.
- Flash GApps (NikGApps is recommended) is a must.
- Optional: Flash latest Magisk for root.
Everything should work.
Source :
sdm660
Hello !
No SD card.
Clean installation.
NikGapps-core-arm64
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
Thank you for the LOS R. Very good rom.
Clean install with Nikgapps omni, found download in Chrome to sd card showing "download pending" and chrome will force close.
Awesome! Thanks!
rchoi999 said:
Thank you for the LOS R. Very good rom.
Clean install with Nikgapps omni, found download in Chrome to sd card showing "download pending" and chrome will force close.
Click to expand...
Click to collapse
I didn't use sdcard...it would be help if log is available...
-----> Have New Update 2020/10/19 I didn't install it, don't know the difference
addro said:
-----> Have New Update 2020/10/19 I didn't install it, don't know the difference
Click to expand...
Click to collapse
Some update in lineageos qcom repo....
Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):
lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip
This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.
sb56637 said:
Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):
lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip
This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.
Click to expand...
Click to collapse
@sabar_op, @sb56637, @amityg
Please keep in mind that there are many reports of bootloops etc using TWRP with Android 11.
TWRP officially supports all devices running Android up to 10, except devices LAUNCHED with 10 or later (having dynamic/logical partitions). There are no versions officially supporting devices running Android 11 to date:
TWRP 3.4.0 does not yet bring support for dynamic/logical partitions, which is required to support devices that launch with Android 10. It does, however, fix support for legacy devices that upgraded to Android 10, but retain the old partition scheme.
Click to expand...
Click to collapse
https://www.xda-developers.com/twrp...s-support-legacy-devices-upgraded-android-10/
Latest TWRP 3.4.0 arrived in June 2020 w/ support for devices upgraded to Android 10 (only). There's been no further versions. See here:
https://forum.xda-developers.com/ap...v1-universal-systemless-t3432382/post83725859
The solution for most using custom Android 11 based ROMs has been to KEEP STOCK Recovery and use ADB fastboot boot TWRP (NOT flash) command from PC when needing custom recovery functions to flash ROMs etc. This seems to work for most despite having no TWRP fully supporting Android 11.
Nb. To achieve root with MagiskSU, this method is probably even more critical as users are reporting bootloops with TWRP custom recovery (flashed) and Android 11 when flashing Magisk pretty much accross the board.
Nb2. Achieving root with MagiskSU can alternatively be done without custom recovery by flashing Magisk Manager patched boot.img (extracted from ROM) using ADB fastboot flash image command from PC. This may be a less fraught method.
I'm still on LOS 17.1, but the above outlines the approach I intend to take / try soon.
Hope it helps, PW
sb56637 said:
Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):
lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip
This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.
Click to expand...
Click to collapse
Can you take the log?
Never try for mipad 4 wifi only, I use mipad 4 wifi-lte, twrp 3.4.0 with previous los17.1 installed and no issue so far...
I tried your room on my mi pad 4 wifi with twrp 3.4.0 no installation problem.
Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.
Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.[/QUOTE]
View attachment 5123311
idcom said:
Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.
Click to expand...
Click to collapse
View attachment 5123311[/QUOTE]
Can't open the attachment...send me a pm for the log link.
A quick question : is sdcard not showing in setting/storage?
Enry44 said:
I tried your room on my mi pad 4 wifi with twrp 3.4.0 no installation problem.
Click to expand...
Click to collapse
Thanks for confirmation...it means no problem with mipad 4 wifi only... :good::good::good:
sabar_op Sure, where can I find the log?
Can't open the attachment...send me a pm for the log link.
A quick question : is sdcard not showing in setting/storage?[/QUOTE]
Have PMed you. Settings-≥Storage shows Portable but corrupted. When I format nothing changes.
sb56637 said:
Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):
lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip
This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.
Click to expand...
Click to collapse
This is probably because didn't install a *Gapps package.
sabar_op said:
Can you take the log?
Never try for mipad 4 wifi only, I use mipad 4 wifi-lte, twrp 3.4.0 with previous los17.1 installed and no issue so far...
Click to expand...
Click to collapse
Alex Kane said:
This is probably because didn't install a *Gapps package.
Click to expand...
Click to collapse
Hmm, not sure, LineageOS 17.1 works fine on this tablet without Gapps.
sb56637 said:
Hmm, not sure, LineageOS 17.1 works fine on this tablet without Gapps.
Click to expand...
Click to collapse
Yeah, but apparently LOS 18.0 beta doesn't.
I tried LOS 18.0 (beta) without gapps first and it would bootloop after reaching the home-screen. Flashing gapps would solve the issue (for me) but I don't use gapps so ... I went back to LOS 17.1.
I also experienced the issue with the sdcard not being properly detected.
Requirements:
-EMUI 9.1
- Stock firmware
- Stock recovery
How to flash :
- Recommended TWRP: Link
1. Corvus Revolt
https://sourceforge.net/projects/tipzbuilds/files/GSIs/CorvusROM/Alpha/20220315/
2. ArrowOS
https://sourceforge.net/projects/gsi-projects/files/v402/ArrowOS-12/
3. OctaviOS
https://sourceforge.net/projects/yilliee-projects/
4. LineageOS 19.0 (AndyYan)
https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/History/
5. LineageOS 19.1
https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/
6. PixelExperience
https://github.com/ponces/treble_build_pe/releases
https://forum.xda-developers.com/t/...plus-a11-gsi-unofficial.4298551/post-86435071
And how does it feel? Suitable for a daily driver? What are pros/cons against A11? Is it worth installing?
luka_bubi said:
And how does it feel? Suitable for a daily driver? What are pros/cons against A11? Is it worth installing?
Click to expand...
Click to collapse
This list is just info for those who want to try the A12 (A12L).
A12 is just cosmetics, everything important already includes A11 (we are talking about GSI of course).
On some mentioned ROMs RIL doesn't work correctly with selinux permissive, plus some other bugs:
Corvus:
https://forum.xda-developers.com/t/gsi-beta-12-1-phh-corvusos-vs1-0-revolt.4415529/post-86586091
LOS 19.1:
https://forum.xda-developers.com/t/gsi-12-lineageos-19-x-gsi-a64b-64b.4358041/post-86608983
More info :
https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/
-Alf- said:
This list is just info for those who want to try the A12 (A12L).
A12 is just cosmetics, everything important already includes A11 (we are talking about GSI of course).
On some mentioned ROMs RIL doesn't work correctly with selinux permissive, plus some other bugs:
Corvus:
https://forum.xda-developers.com/t/gsi-beta-12-1-phh-corvusos-vs1-0-revolt.4415529/post-86586091
LOS 19.1:
https://forum.xda-developers.com/t/gsi-12-lineageos-19-x-gsi-a64b-64b.4358041/post-86608983
More info :
https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/
Click to expand...
Click to collapse
Thanks for all of these tests, on many devices A12 gsis are buggy. Better remain on A11 for now I think
Incomtus said:
Better remain on A11 for now I think
Click to expand...
Click to collapse
Reverted back to my lovely 8.0.0.166 with SuperSu root .
I wish A11,A12 fans a lot of fun and success!
Does anyone here uses A12 (LineageOS 19.0, LineageOS 19.1)? I currently use @AndyYan 's LineageOS 19.1 and mostly it works quite smoothly. I like the cosmetics of A12, the animations are way smother than on previous versions. Also no new lag or crashes. It feels like the battery last less time (but it is possible that I use my phone more this days).
There are two problems that I face with it. The first one was during first boot Andoid asks to enter PIN. If you enter it you run into loop and have to reset the phone. The solution is to skip the phone security part (PIN, pattern, ...) and do that later. The other is with bluetooth. It finds other devices and other devices sees the phone. But pairing always fails. Does enybody have the same problem (and has found the solution)?
luka_bubi said:
But pairing always fails. Does enybody have the same problem
Click to expand...
Click to collapse
Known issue on Kirin
luka_bubi said:
and has found the solution)?
Click to expand...
Click to collapse
No, afaik
luka_bubi said:
I like the cosmetics of A12,
Click to expand...
Click to collapse
Have you tried [GSI] dotOS-R-v5.2-OFFICIAL ? Screens can be found here
-Alf- said:
Have you tried [GSI] dotOS-R-v5.2-OFFICIAL ? Screens can be found here
Click to expand...
Click to collapse
No, not yet- Looks great. I have to try it someday, right now I do not have time to reset my phone. Waiting for vacations
Since i had unresolved issues with A12 and bluetooth I gave up and tried dotOS a try. Well it looks and feels great. I noticed the phone was always hot and it loosed 20% of battery every hour. I did not use the phone at all, only to check the clock every now and then. Now I am back on CAOS11 and hope everything will work.
luka_bubi said:
Since i had unresolved issues with A12 and bluetooth I gave up and tried dotOS a try. Well it looks and feels great. I noticed the phone was always hot and it loosed 20% of battery every hour. I did not use the phone at all, only to check the clock every now and then. Now I am back on CAOS11 and hope everything will work.
Click to expand...
Click to collapse
I'm sorry I wasted your time bro
luka_bubi said:
I noticed the phone was always hot and it loosed 20% of battery every hour.
Click to expand...
Click to collapse
Strange...
-Alf- said:
I'm sorry I wasted your time bro
Click to expand...
Click to collapse
No time was wasted. It is a beautiful rom with unique design features. I would have never had heard about it if it wasn't for your recommendation. Too bad my phone started to overheat and used so much battery while doing nothing. I wonder what was the issue. It is possible to be related with battery management as you have already noticed. Perhaps I will try it later someday.
As for A12 I hope somebody will find the fix for our bluetooth issues.
Lineage 19.1 is a nice rom, but I tested it and PE and the same bug was found: The cam doesn't work when opened by other appsLineage 19.1 é uma bela rom, porém testei ela e a PE e o mesmo bug foi constatado: A cam não funciona quando é aberta por outros apps