Develop Bugs

[ROM][B704_ATX by Marismillas][JB 4.1.1] Huawei Ascend P1 U9200

This is a semi-stable mod for our Huawei Ascend P1 based on the chinese firmware B704 EMUI 1.6. Hope you enjoy it! :laugh:
First of all: I'M NOT THE CREATOR OF THIS BEAUTIFUL ROM, I'M JUST THE "TRANSLATOR": THE CREATOR IS MARISMILLAS, AND YOU CAN FIND HIM (AND THIS PROJECT) HERE http://www.htcmania.com/showthread.php?t=674855, BUT IT'S IN SPANISH. THAT'S WHY I DECIDED (WITH HIS PERMISSION) TO TRANSLATE IT.
Features:
Rom based on the B704 EmotionUI 1.6
Compiled by the ATXTeam
Flashable via CWM or TWRP (I suggest to emulate the 6.0.3.1, no problem with it )
You don't have to come from a previous emui, so DIRECT INSTALLATION for everyone
Globalized (so lot of strings in chinese has been removed, you won't have any problem in the daily use)
Init.d support
Already rooted
Gapps are included
Some tweaks (zipalign, EXT4 optimization, SD Card 2048, better RAM management, sqlite optimized, Dalvik VM tweaked, faster internet, Kernel Tweaks, and other great stuff!)
Compatible with PurePerformanceX™
Obviously to flash it do a full wipe and then install zip from sdcard.
In the new revision (1.2) there is also the Fly-On_Mod to make a really butter-experience!
If you notice any kind of lag, download an Android Terminal Emulator with SU Active and write "entropy_on"
What works:
Almost all
Audio Lag in heavy games finally fixed
What doesn't work:
Fast forwarding videos in YouTube (still no solution, but marismillas's trying to fix it :/ to avoid it, go ahead with the video, then turn hd off, and then turn it again on. It should work)
Fast forwarding videos in the Video Player (PARTIALLY FIXED: you can use MX Player with H/W+ to avoid it)
Proxy is locked and it's like if we surf the net from China. Sometimes some sites are locked, very annoying :/ (FIXED: it is caused by the accelerator service in wi-fi settings, so if it happens, turn Accelerator Service off)
Download:
Link for 1.0 here
Link for 1.2 here

Works great!
It's stable for me.

jlcachavera said:
Works great!
It's stable for me.
Click to expand...
Click to collapse
I'm glad you like it! If you wanna give feedback write here or in the htcmania post
PS. OP updated: proxy error finally fixed!

will you release a b707 version?

agritux said:
will you release a b707 version?
Click to expand...
Click to collapse
I asked him.. waiting for answers btw if the problem is just the kernel I think you can flash the B707 one without problems let us know
Inviato dal mio U9200 utilizzando Tapatalk

i dont know. i read about b704 and i think it is not stable.
actualy i am looking for the most stable rom.
stock or custom it doesnt matter.

agritux said:
i dont know. i read about b704 and i think it is not stable.
actualy i am looking for the most stable rom.
stock or custom it doesnt matter.
Click to expand...
Click to collapse
I've been using this ROM for 2 months, and I can assure that the unique problem is fast forwarding videos (like in description).. For the rest it is much stable
Inviato dal mio U9200 utilizzando Tapatalk

is there a way i can install system dialer alone? without full rom

[Rom]MK44.4(CM11)(4.4.4)

As always, use at your own risk!​
First things first, this is made by Chinese for Chinese. With all its consequences. Base is 11 CM 4.4.4. The base is Rom for Dualsim. But runs on the MT7-L09 / L10.
It is important that you stick strictly to the installation instructions!
I now run the Rom since Thursday on and can say that it is suitable for everyday use. So far, since most of the CM of Rom. For battery life, is in the normal range.
The zip I have now revised again.
What has changed ?:
- China Apps away.
- L Android Google Keyboard v2 involved.
- Xperia Z2 Keyboard 6.4.A.1.24 Multi language involved.
- Gapps included.
- Build.prop DPI value 400 modified.
- MK44.4
Source
Advantage:
- Very many settings.
- Hide / Rename network operator.
- Runs smoothly and quickly.
- Xposed runs in the current version.
- Etc
Disadvantage:
- No fingerprint scanner
- No NFC.
- No Huawei camera, but the Google camera. Not as extensive.
- No bluetooth music streaming working
Prerequisite:
- Open bootloader
- Custom Recovery
- Rom
- SuperSU
Installation:
- Rom and SuperSU to the SD
- To Recovery
- Factory Reset
- In mounts and storage:
- Format / system
- Format / cache
- Format / data
- Format / data and / data / share (/ sdcard)
- Now flash the Rom
- Flash SuperSU
- Restart
Institution:
When you first start to follow the dialogue and the last window select the Xperia Google or keyboard. The Rom contains its own launcher with Drawer. If you want, you can still install the attached Xposed version.
What else is there to consider?
A backup in recovery you can do it, but does not help because it can indeed restore, but do not use it.
Here are a few pictures. But is already set up with Nova Launcher and Xposed modules.
XDADevDB Information
MK44.4
Contributors
Ry09iu
ROM OS Version: 4.4.4
Version Information
Status: Custom
Created:
2015-03-09

Thank you very much, i will try it out the next days.
Could you pls explain to me what you mean with this (ruhig in deutsch):
"A backup in recovery you can do it, but does not help because it can indeed restore, but do not use it."
I dont get it

Das Rom startet zwar, aber es wird alles beendet. Wenn es fertig ist hat man nur noch einen schwarzen Schirm.
---------------------------------------
Although the Rome starts, but it will all end. When it's done you have only a black screen.

Thank you for great ROM! A lot of settings, very good job! Highly recommend!
Only one question: is it posiible to set default incallui instead of as on attached picture?

I can not tell you.

new version??
Hi Fooox1 !
first post has been edited... it's a new version with some Google stuff included in the ROM... I downloaded everything yesterday to try this ROM, but today it's changed!! I will let you know my opinion... Thanks for posting

Rhanks m8. i'll test it now. I'll give you my feedback later.

leonardus_magnus said:
Hi Fooox1 !
first post has been edited... it's a new version with some Google stuff included in the ROM... I downloaded everything yesterday to try this ROM, but today it's changed!! I will let you know my opinion... Thanks for posting
Click to expand...
Click to collapse
Is the same Rom, I packed keyboards and gapps to Rom. This saves a few steps.

Thanks @Fooox1
now the rom already installed. one problem with a pop up message that google+ not successfully installed re install again. the problem solved using system app remover. Although I am unable to download google+ from play store due to compatibility issue. last thing my device is MT7-L10 so how to activate 2 sim cards.
thanks in advance.

My mistake, I have not taken over everything from gapps. Is corrected. Original Rome for the MT10, like all china custom Roms.

USSD services doesn work. Can someone check?

my feedback
Hi
after a couple of days, here's my feedback on this ROM...
I like it very much, works well and it's a big step ahead in comparison with stock EMUI rom. Contains a lot of settings, can install CM11 themes. The device is more solid, serious. EMUI in my opinion looks childish in comparison. I'll get back to stock ROM only when Huawei releases lollipop.... I have not tried yet Xposed, I'll try in the future and report about it....
Unfortunately there are a couple of fallbacks. It's up to you to decide whether you need it or not...
As already stated in first post:
-no fingerprint
-no FM radio
-no NFC
-google camera app is basic in comparison to huawei app
I also find out that:
-alarm not ringing when device is tuned off (stock ROM turns device on automatically one minute before and than rings the bell)
I confirm that:
USSD services does not work (as IgorX6 points out)
This ROM is great in my opinion and I strongly recommend to give it a try.
The real problem (the missing thing only) is fingerprint, one of the most important features of the device...
I wait for further developments...
Anybody can report in detail about Xposed under this ROM? which version works well? Themes issue is fixed? Which Xposed apps works ? etc THanks!

IgorX6 said:
Thank you for great ROM! A lot of settings, very good job! Highly recommend!
Only one question: is it posiible to set default incallui instead of as on attached picture?
Click to expand...
Click to collapse
Yes!!!
I found how to set standart incoming call shell:
go to Phone -> Settings -> Non intrusive -> remove a tick

Hola !
Before installing this rom, we must be on B127 ?

Yes or later, otherwise the kernel and baseband does not fit and it comes to bootloop.

artounet said:
Hola !
Before installing this rom, we must be on B127 ?
Click to expand...
Click to collapse
I had before B137 http://forum.xda-developers.com/mate-7/development/rom-erykinemt7-v1-0-0-mt7-l09-b137sp03-t3044695 , all works fine

Hi,
I also installed the adjusted ROM. Great job!
But I have encountered two problems:
1) Audio streaming via Bluetooth is still not working for me
2) I cannot change the DPI with "texdroider dpi" anymore --> but I could manually change the DPI (my best guess is, that there is problem with the access permissions)
PS:
I could activate Bluetooth audio streaming with the app "SoundAbout Pro" :laugh:
---> Ok, it seems, that this does not work everytime
Cheers

To 1, then, might not function properly.
At 2, why not just in the build.prop manually change?

@Fooox1
hi Fooox1,
any suggestions about the issue I reported (phone does not wake up to ring alarms, if turned off)?
How can we report to developer this? I have no idea, but I believe that it should not be too difficult to fix...

Can you just talk Report. My experience is, however, that there is no feedback.
http://bbs.anzhi.com/forum.php?mod=viewthread&tid=9580395&mobile=yes

New 4.4.4 ROMs

AICP 4.4.4 (Android Ice Cold Project) for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=9400#entry38266527
BlissStalk Rom 4.4.4 for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=9340#entry38186708
Carbon ROM 4.4.4 for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=7580#entry36295826

Azharla08 said:
AICP 4.4.4 (Android Ice Cold Project) for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=9400#entry38266527
BlissStalk Rom 4.4.4 for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=9340#entry38186708
Carbon ROM 4.4.4 for Huawei Ascend Mate (Building from source)
http://4pda.ru/forum/index.php?showtopic=475994&st=7580#entry36295826
Click to expand...
Click to collapse
None of these work! I get boot loop for all 3.
Sent from my MT1-U06 using Tapatalk 2

3 run on my phone. (TWRP 2.8.1.0, Wipe all before install)

Which of the 3 do you think is best?

tarakus said:
3 run on my phone. (TWRP 2.8.1.0, Wipe all before install)
Click to expand...
Click to collapse
Okay I will try again. I wiped all including custom storage and flashed the ROM. Then wiped caches then rebooted.
I'm also using TWRP 2.8.1.0. Not sure what I'm doing wrong.
My Mate is the 1 Gig version. Is yours the 1 or 2 Gig?
Sent from my MT1-U06 using Tapatalk 2

I got bootloop too
Sent from my H30-U10 using XDA Free mobile app

I tried the no 3 Carbon ROM and it works flawless. Its very smooth and fluid with nice blueiah theme.
Problems:
Bluetooth doesn't work connects and force closes
Google map gives error.
I might go back since pairing my car is a must for me.

still boot loop

No 3 Carbon ROM works fine. You must Wipe and factory reset in TWRP before installing this.
Bugs: Bluetooth does NOT work. It wont pair and force close.
I wanted to report this bug to the developer on that russian forum but to sign in and register its asking me captcha code in russian which I cant type. Would really appreciate if somebody can register there and report this bluetooth bug. The rest the rom is flawless. Everything works. ALMOST

Chattersking said:
No 3 Carbon ROM works fine. You must Wipe and factory reset in TWRP before installing this.
Bugs: Bluetooth does NOT work. It wont pair and force close.
I wanted to report this bug to the developer on that russian forum but to sign in and register its asking me captcha code in russian which I cant type. Would really appreciate if somebody can register there and report this bluetooth bug. The rest the rom is flawless. Everything works. ALMOST
Click to expand...
Click to collapse
Ya mee to have the same problem....bluetooth doesnt connect to my car....

Bluetooth Problems with smartband and stock rom

Hello when I'm on the stock rom or any stock based rom the connection between my smartband talk swr30 appears like this //images.tapatalk-cdn.com/15/11/22/9cb1436cd57d0043be16dac3a9e879b3.jpg only call audio.
cant post links copy the text after the //
The problem is that I cant use voice commands or answer messages by voice because the smatbands mic isn't recognised.
Other devices work perfectly an pair like this //images.tapatalk-cdn.com/15/11/22/46c2e329efa11203d145add97219cc02.jpg with call audio and media audio.
But when I flash any aosp or cm based rom the smartband talk connects with media and call audio, the voice commands work, everything works perfectly.
Any ideas?. There is something i can modify on stock bluetooth files [emoji23] ?. I dont know any help is appreciated[emoji3] and sorry my english hope you understand.
Sent from my LG-D855 using Tapatalk

Any ideas?

Hello,
I have exactly the same problem ! (I received my Swr30 three days ago for my birthday)
Do You find a solution about the Bluetooth ?
If not, I think that I'll try to flash a cm rom, but it will be cool if I 'll don' t need to do that.
Sorry too for my en glisse.
Have a good Day !

I had the very same problem with Garmin VivoActive with stock v30N EUR.
Instead Garmin works with Fulmics 7.6.
Instead I have another bluetooth problem: no voice commanding with JVC car radio KD-784BT and Motorcycle Intercom Midland BT-X1 FM.
Voice commanding work with:
- LineageOS 14.1
- RR 5.8.4.
They do not work with:
- Stock v30n EUR
- Fulmics 7.6
- Stock v21A
- Stock V30A (March 2017) Bumped
- Stock V30A (March 2017) Bumped + Xceed Kernel

ASUS ZE550ML CM 13 and BLISS 6.2 issue

Hello, i am having some issue with Custom Rom. I am compleletly newbie in those things but still i did root and install CM 13 with the help of reddit. Everything was perfect till i found my dialer is not working. Whenever i try to call someone "Unfortunately, Phone has stopped" pop up. Then i installed BLISS 6.2 ROM. Dialer issue was fixed but BATTERY backup was so POOR. In a standby mode i got 3 hours of battery and that's not it after using 3 to 4 hours system UI start lagging and getting unable to use. Thing is my friend DEVICE is ASUS ZE551ML 2GB is used the same method and same rom but his one is completely perfect and no issue at all. I don't what's wrong with mine. Would be pleasure if anyone can solve it.

When using the nightly cm rom, you may not expect it to be perfect, as bugs are fixed daily, and some of these fixes will kill something else. That is what happened April 9th with the dialer. The build of April 16th has fixed that problem, amongst other things, so try that one. (until we find something else to break...)
Verstuurd vanaf mijn ASUS_Z00A met Tapatalk

Sajib95 said:
Hello, i am having some issue with Custom Rom. I am compleletly newbie in those things but still i did root and install CM 13 with the help of reddit. Everything was perfect till i found my dialer is not working. Whenever i try to call someone "Unfortunately, Phone has stopped" pop up. Then i installed BLISS 6.2 ROM. Dialer issue was fixed but BATTERY backup was so POOR. In a standby mode i got 3 hours of battery and that's not it after using 3 to 4 hours system UI start lagging and getting unable to use. Thing is my friend DEVICE is ASUS ZE551ML 2GB is used the same method and same rom but his one is completely perfect and no issue at all. I don't what's wrong with mine. Would be pleasure if anyone can solve it.
Click to expand...
Click to collapse
Hello
Thanks for feedback
First of all you shouldn't open a thread for a bug cm is fixes all bugs one by one and nightlies are not testing before releasing so u should wait for fixing
And For Bliss
Bliss and almost all other roms have poor battery but we are trying to fix that battery thing
If you are using latest bliss build u can except some weird issues because bliss had some bugs and now they gone but until new build(official one) don't except too much thing from bliss i am going to release an ALPHA build u can try that one after releasing and i don't have a ZE550 for testing