Hi, sorry ive been posting alot of threads lately, having a ton of issues, hopefully this will be the last one, my phone is bricked, when i press the power button, i see the device name logo for a second then it goes black for about 2 seconds, then the device logo re-appears (looping) someone told me to flash a stock rom, so I am trying, using odin 1.3 I get stuck on sboot.bin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Enter CS for MD5..
<ID:0/005> Check MD5.. Do not unplug the cable..
<ID:0/005> Please wait..
<ID:0/005> Checking MD5 finished Sucessfully..
<ID:0/005> Leave CS..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
What exactly do I do now?
Edit: when using 3.07 it passes sboot.bin but stops at NAND write start
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
Take Odin 3.09 from this DOWNLOAD
OmarKnows said:
Hi, sorry ive been posting alot of threads lately, having a ton of issues, hopefully this will be the last one, my phone is bricked, when i press the power button, i see the device name logo for a second then it goes black for about 2 seconds, then the device logo re-appears (looping) someone told me to flash a stock rom, so I am trying, using odin 1.3 I get stuck on sboot.bin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Enter CS for MD5..
<ID:0/005> Check MD5.. Do not unplug the cable..
<ID:0/005> Please wait..
<ID:0/005> Checking MD5 finished Sucessfully..
<ID:0/005> Leave CS..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
What exactly do I do now?
Edit: when using 3.07 it passes sboot.bin but stops at NAND write start
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
Click to expand...
Click to collapse
@OmarKnows
I had the exact same issue. It was stuck at sboot.bin (using odin3.09). I just attempted to run it under odin3.07, and it has made it past sboot, and is currently on system.img
I have a sprint Note2 (SPH-L900)
hope it helps
Earned said:
@OmarKnows
I had the exact same issue. It was stuck at sboot.bin (using odin3.09). I just attempted to run it under odin3.07, and it has made it past sboot, and is currently on system.img
I have a sprint Note2 (SPH-L900)
hope it helps
Click to expand...
Click to collapse
is the stock rom you are flashing is for your specific variant of note. make sure of that.
have you done the things you have to do before flashing, like enabling debugging mode in the developer options?
run odin with administrator
pokamonNereid said:
is the stock rom you are flashing is for your specific variant of note. make sure of that.
have you done the things you have to do before flashing, like enabling debugging mode in the developer options?
run odin with administrator
Click to expand...
Click to collapse
its alright everythings fixed just needed to flash a pit file
Related
My phone had many issue after upgrading to 4.3 , I tried to odin M919UVUEMK2_M919TMBEMK2_TMB.zip stock to fix it , now Odin fails everytime. Tried downloading new SW in case it was corrupt and using different ports same result. It also fails at different points , sometimes it fails right away and sometimes it goes all the way to the end then fails
knox 0x1
also said something about seandroid kernal
Any Ideas
re: flashing stock firmware
ransome7 said:
My phone had many issue after upgrading to 4.3 , I tried to odin M919UVUEMK2_M919TMBEMK2_TMB.zip stock to fix it , now Odin fails everytime. Tried downloading new SW in case it was corrupt and using different ports same result. It also fails at different points , sometimes it fails right away and sometimes it goes all the way to the end then fails
knox 0x1
also said something about seandroid kernal Any Ideas
Click to expand...
Click to collapse
The issue you are having has nothing to do with KNOX.
What I would do is to uninstall all samsung drivers as
well as kies from your computer.
Then reboot the computer and install the latest Samsung usb drivers.
Here is the direct download link for the samsung usb drivers:
https://www.dropbox.com/s/k7ut088zsc5g0un/Samsung USB Drivers.zip
Good luck!
Misterjunky said:
The issue you are having has nothing to do with KNOX.
What I would do is to uninstall all samsung drivers as
well as kies from your computer.
Then reboot the computer and install the latest Samsung usb drivers.
Here is the direct download link for the samsung usb drivers:
https://www.dropbox.com/s/k7ut088zsc5g0un/Samsung USB Drivers.zip
Good luck!
Click to expand...
Click to collapse
Did as you said uninstalled all samsung drivers including kies , reinstalled , reran odin same result
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Odin will work if I do a recovery , but will not load the stock firmware to completion, just run it again and this time it went further before fail
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
This time the green bar was all the way done and failed at 99%
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
ransome7 said:
This time the green bar was all the way done and failed at 99%
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
Try using a different usb port and/or cable, that has helped me in the past with random flash failures, both through ODIN and fastboot (for nexus devices).
klebs89 said:
Try using a different usb port and/or cable, that has helped me in the past with random flash failures, both through ODIN and fastboot (for nexus devices).
Click to expand...
Click to collapse
It was the cable , used a different samsung cable went though first time. Thanks for the input that was the nudge I needed
Hi guys,
so I've got a Note 2 UK version, which had problems upgrading (had a stock rom).
I so decided to ODIN a new stock rom (4.4.2 UK from SamMobile), which I failed.
It was good until the very last bit - it failed on flashing modem.bin.
I've tried re-downloading the rom, re-booting the phone, and everything I could find to do, but they were all no good.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried flashing only modem.bin alone, which didn't work, so i guess it's the problem with flashing modem.bin.
Btw, I've tried both ODIN v1.85 and v3,04.
Not sure if this will have an effect, but the sim card doesn't read, so I was thinking that the sim card tray has a problem.
I ordered one to replace it - again, not sure if this makes any difference.
It's now stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' screen.
I can go into download mode, but nothing else.
Please help!
Thanks
Miracle.vl63 said:
Hi guys,
so I've got a Note 2 UK version, which had problems upgrading (had a stock rom).
I so decided to ODIN a new stock rom (4.4.2 UK from SamMobile), which I failed.
It was good until the very last bit - it failed on flashing modem.bin.
I've tried re-downloading the rom, re-booting the phone, and everything I could find to do, but they were all no good.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried flashing only modem.bin alone, which didn't work, so i guess it's the problem with flashing modem.bin.
Btw, I've tried both ODIN v1.85 and v3,04.
Not sure if this will have an effect, but the sim card doesn't read, so I was thinking that the sim card tray has a problem.
I ordered one to replace it - again, not sure if this makes any difference.
It's now stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' screen.
I can go into download mode, but nothing else.
Please help!
Thanks
Click to expand...
Click to collapse
Not.sure.if.it will make any difference but the latest roms are recommended to use.odin 3.09
The whole procedure goes to plan, and I get the message "PASS" in ODIN
Following the instructions here... http://www.theandroidsoul.com/samsu...wifi-philz-touch-advanced-cwm-recovery-53562/
When when I boot in to recovery, I think it's just a standard recovery, not Philz. i.e. It looks pretty basic, and wont let me flash a non-sogned zip file.
Is this only achievable on a previous samsung ROM? Or am I making some other mistake?
Here is the result from ODIN..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.41.6-n5110.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
LOL, never mind. 5th attempt, it works now. The only thing I did different was untick the "Auto restart" tick box, so that I could copy the error log..
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
solved - i found another room from http://www.sammobile.com/firmwares/confirm/41671/L710VPUDNJ2_L710SPRDNJ2_SPR/ that worked with no issue
mcolvin2005 said:
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
Click to expand...
Click to collapse
The ROM that it ships on from FreedomPop is pretty much the Stock Sprint ROM with minor changes. You can just uninstall/disable the applications mentioned.
You should follow the instructions here if you want to use ODIN and flash the unmodified Stock Sprint ROM.
EDIT: Oops missed the second post
I just used TWRP. I've never used Odin.
Hello,
im getting these lines when trying to flash stock via odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
any suggestion?