enable ASW on i747m PERMANENTLY - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

hello everyone thanks for visiting my post i was just wondering if anyone has found a way to enable ASW on i747m PERMANENTLY!!
i have use this method it works but if you reboot it resets..
http://forum.xda-developers.com/showthread.php?t=2344627
i have tried few things and nothing has worked i think its the i747m modem resets it.... but but i was think if you flash different modem the with wind s3 modem the T999 modem or something it might stick just a thought?.
any suggestions i don't wanna flash if it might brick would it?
or if you can find some way to edit i747m modem with some of the t999 code regarding to NV Restore and change the default restore in the i747m modem to the T999 ASW band Instead of stock
And i was wondering is anyone has found a PERMANENT fix?
let me know
thanks for your time.

As far as Im aware, all the info you seek is on the thread youve linked and posted this in. So probably not.

Related

Mobilicity/wind s3 network registration

Hello everyone I have a s3 and I'm using it it with mobilicity provider. Every time I turn the phone off it takes like 5 mins to register to network? Does anyone know why. My friend note 2 register right away. Does s3 have bad radio?
Sent from my SGH-T999 using xda premium
Anyone??
Sent from my SGH-T999 using xda premium
I don't think the radio has anything to do with it. What kind of connection are you getting when it registers?
My unicorn died, back on the pony.
Let us know not just what it says in the status bar when it finally registers, but also, after booting up, go to Settings > About Device > Status and post what it says for Mobile Network Type, both before and after it connects.
Also, please post info about what firmware you are running. Are you rooted? Custom Rom? Have you flashed any kernels or modems? Did you try wiping Dalvik and Cache from recovery? Try factory reset?
I would normally agree with Vopezy about the modem, but in your case, I have to wonder about it since you are on a carrier that usually has the T999V model phone. If you want to give it a shot, you could try to flash one of the Mobilicity modems.
First go to Settings > About Device and write down your current baseband, in case you need to flash back to it.
You can find the T999V modems at the bottom of the OP in this thread: http://forum.xda-developers.com/showthread.php?t=1880987
Just to be clear, I dont usually recommend flashing a different models modem. Usually this is because in most cases it simply wont even establish a connection. (most times its a T999V user wanting to flash a T999 modem, but staying on their own network) As best as I have been able to tell, the T999 and T999V are virtually identical. I do know the modem partitions are the same, which is why you can flash the modem, it won't brick your phone, but it just may not work, forcing you to flash back to the original.
Because they are practically the same phone, and from what Ive read, T999 modems don't work on canadian networks, it seems logical that the T999 phone would have problems....unless it had a T999V modem. I hope that makes sense, I want to try to help you understand what you are doing and why.
If that does not work, or you want to try something else first, you could try swapping SIM cards with someone on the same network as you. If their SIM works fine in your GS3, or your SIM works in their phone, then its most likely either a SIM or account issue. If their SIM does not work on your phone, but yours does work on theirs, then its either SW or HW and not an account issue.
Something else you can try is flashing some of the other T999 modems, and/or try flashing the stock firmware via Odin. This would only help if there was something corrupted in the system partition that was causing your problem. Possible, but not probable.
As a last resort, and this would require a bit more work to pull off, you could try to flash the Mobilicity Firmware using Odin. (Or if I have the time I can try to build a quick rom out of the firmware so it can be flashed in recovery...this would be safer)
Either way, if it comes to that, please do not try to Odin flash the fw on your own. It will almost certainly fail. I will probably need to modify something to make it work.
The more I think about it, the more I am leaning towards trying the Mobilicity modem. Let me know if you have any questions or concerns about doing any of this.
Sorry its so much at once. Ill probably be logging off soon, so wanted to leave you with more than one thing to try until Im back on.
Good Luck!!!
Thanks a lot it worked so it's a sim card issue cause mobilicity have new Micro sim cards and I had the older one and I was activating a customer today and tried her sim on my phone and it registered right away. Thanks
Sent from my SGH-T999 using xda premium

Sim wont register on network?

Alright finally got through all the bs and reading and crap....And now this I put my sim into the phone and it cannot register or even get a siganal granted my place I normally only get 2 bars so this is why I wanted wifi calling but When im outside with the phone it just wont reigster to tmobile....I am thinking of flashing back to stock rom and see if I can get a signal
Currently I am running JediMaster_12_MB4 on the phone
So my next option willl be to convert back to oem to see if this works....
Then maybe try this rom here and see if that works
http://forum.xda-developers.com/showthread.php?t=2026569
But if anyone has any ideas Im open to them before I start flashing this thing lol
Did you verify your APN Settings ?
The rom may not contain the one you need.
Verify by going into the "everything" thread in the development section and comparing your current APN to the one listed there.
Also, is your modem correct?
It can be verified there also....g
Sounds to me you may have a modem or apn related issue..like the user stated above me said....id try another modem, but clear cache/davik cache first..then install modem and reboot...try that first
I downloaded the tmobile modem can I flash it with cwm right? I got it from the teshxx thread I did check my apn settings. Since mine doesnt get 4g around here I am using what I have been using on my note one i717 epc.tmobile.com everything else is the same.
I was reading when flashing a modem from tmobile it gives an invalid imei.
I317UCAMA I guess thats the modem I am on I read other were able to use the att modems fine though...
Thanks for the input hopefully I can get this thing working tonite
Anyone else flash a tmobile modem on thier i317 without any trouble if so which one and how?
Thanks in advance
You can't flash a T-Mobile modem to an AT&T Note 2 because the partition sizes are different. What you can do, however, is apply the AWS mod to enable T-Mobile's HSPA+, on top of an AT&T modem (You have to flash an AT&T modem first, then do the mod. If you flash another modem after, you have to reapply the mod, even if you reflash the same modem). It will then work exactly like a T-Mobile Note 2. That's what I'm doing.
Here's the AWS mod: http://forum.xda-developers.com/showthread.php?t=2068041
If you want a YouTube video on how to do it (it takes 5 minutes), watch this: http://www.youtube.com/watch?v=y7gMO_kRxyM&playnext=1&list=PLxxZcX9GkwxdviL8KU6LZ8xW-bX7gkHr4
As for Wifi-calling, that's a ROM feature. There's a T-Mobile ROM for the AT&T Note 2 available in the Android Development section.
-----
If your phone actually won't register at all, and there's signal on another phone, then your phone might be marked as lost/stolen. Call up T-Mobile and give them the IMEI to check.

[Q] wind note 3 with t-mobile roms?

so before i go flashing any new roms that come out for this thing, i need to know, is this phone like the S3 was (and many others i think) where i can flash any rom that is made for T-Mobile onto the wind phone? what about roms for rogers/bell/telus, as the model number and baseband number for the phone is all the same (SM-N900W8 is the model, baseband is N900W8VLUBMI5). i know that the Tmobile note has a number ending in MI7 and then the two numbers right after the N900 are different, but those two numbers, i was told, are maybe for something to do with country code and shouldn't really matter?
please help me figure this out, as i'm sure lots of other wind or other canadians are wondering the same thing.... got my phone rooted and flashed with TWRP and am just waiting to find out if i can flash the darthstocker mod onto my brand new phone, but i don't want to risk screwing it up if i can't
thanks for any and all help
bump?
Yes, just keep your current kernel.
aooga said:
Yes, just keep your current kernel.
Click to expand...
Click to collapse
How do I do that? Do I have to pull it off of my phone? Is there a way to extract my phone's stock Rom to my computer so it is Odin flashable?
Is flashing a Rom while keeping my kernel something even somewhat straightforward?
asaqwert said:
How do I do that? Do I have to pull it off of my phone? Is there a way to extract my phone's stock Rom to my computer so it is Odin flashable?
Is flashing a Rom while keeping my kernel something even somewhat straightforward?
Click to expand...
Click to collapse
Just make sure the rom you're flashing doesn't include a custom kernel (most of them dont, just be careful though). To answer your second question, no you cant make a odin image, but you can use the official one (find it in your carriers section)
The carrier one is mitt available yet, otherwise I wouldn't be asking if I can pull my own. Can you pull the one off your phone using terminal emulator or anything else?
Sent from my SM-N900W8
bump again - anyone have any idea how long it's going to take to get the firmware available to download? does it normally take longer than a couple days after release for samsung to get on this?
Bell To Wind
I would like to use my note 3 thats from bell (n900w8) and use it with wind please help, i need the best modem there is if this is posible.

Stock MD6 Modem for Straight Talk s3 (S960L)

i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed

[Q] HELP, NEED OE2 or OCF baseband

I'm doing some testing and other stuff and I need the baseband and modem in a flaahable zip format for use with twrp should I screw up. Can anyone plz help? I have the g920p and ill be testing the g920t roms. Just came back to sprint this week for service hehehe...... so I'm looking to get some potential new ROMs for our devices either by port or whatever.
Sorry if this is not the place for these kinda questions but I'm an impatient bastard and I don't have time to scope the web for a proper placement for these questions, wth all respect. please and thanks for the help.
I've gotten the tmo roms to boot however...
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
this.guy.lol said:
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
Click to expand...
Click to collapse
Wouldn't this be a kernel or rom issue? Generally, custom roms don't touch the baseband, only carrier OTAs.
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
this.guy.lol said:
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
Click to expand...
Click to collapse
So you're flashing GSM ROMs...for a CDMA device...it's not a baseband issue...it's a ROM/kernel issue...
Sent from my SM-G920P using Tapatalk
Well I'm flashing every kind of rom. I REALLY,would just like the damn base and/modem please. I'm flashing all roms and the baseband and imei is broken on GSM on the cdma only the baseband is broken. This request of mine shouldn't be a matter of interrogation....more a matter of helping someone out who would like yo experiment and possibly find a way to run any rom on our devices. Be its cdma or GSM more or less the g920f as its global the the g920v/I/k roms or whatever is cdma.
No no sir that isn't what I'm seeking.....I require the modem so I can experiment with other roms. I need the modem.bin or the modem. I need this desperately. I don't mean to be rude but this should be simple to acquire from a well known and well experienced dev or someone like a dev. Can you or someone please help?
http://www.sammobile.com/firmwares/database/SM-G920P/
Sent from my SM-G920P using Tapatalk
Djvoleur, i too have a sprint s6 thats gsm unlocked and ive tried plenty of stock/rooted kernels for our device with tmobile, att, verizon, sprint s6 edge, and even international cooked roms . Most of them boot when using your kernel . Theyll work with vkernel or unikernel, but as he was saying, although he was rude, the baseband is always unknown. No signal, sometimes you wont even see a X for no signal. Do you have any ideas i could try ? Ive got plenty sprint s6 phones to try this on and not worried about a brick. I know the risks. I titanium backup restore my personal phone nearly 3 times a week to figure this out. Not enough people bounce ideas off one another in this forum
Have you tried a note 5 rom? I would assume the issues from a note Sprint note one wouldn't be the same as the connectivity settings would be the same. The issue would probably be more of a hardware/programming problem. At this point, I think it would be an easier port since our device isn't as similar to the international device as we once thought it could be.
Never tried note 5 rom . I dont think that'd work without a port of device drivers n such

Categories

Resources