Hi , I'm not really new here, only I've been reading quite a while whithout subscribing.
I live in the netherlands, work as boat mechanic.
My phone is LG C660 optimus pro, became slow and wifi got an error, won't turn on anymore, suddenly.
I tried to move to cyanomod, mainly to see whether it would fix wifi error, and I had cyanomod previously on my sony ericsson experia mini pro.
at the moment I have to use the sony again,
my LG C660 optimus pro is near bricked...
I did root it, went fine, ran clockworkmod recovery, also fine, then I tried to put on cyanomod stable version through MOD manager, went wrong somehow,
I now only get LG logo and it stays there.(it does get into emergency mode)
tried to reflash original using KDZ updater, program runs, have the firmware, finds connection witch my phone only if in emergency mode
(got modem disabled in system of windows)
KDZ starts working but errors and phone has no change
here's the log from KDZ :
22:10:02 : Launching SW update
22:10:02 : Unpacking KDZ
22:10:09 : KDZ file extraced
22:10:19 : Files were extracted.
22:10:19 : LGMobileDL Load.
22:10:19 : Port = -1
22:10:19 : Connecting to phone
22:10:29 : Check Phone mode = 1
22:10:47 : Phone type check.......
22:10:51 : LGMobileDL.DLL Loading....
22:10:51 : _SetAuthMark Fail
22:10:51 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:10:51 : _SetAuthMark Fail
22:10:51 : LoadCDMAPhoneData() Error
22:10:52 : GetProcAddress Error(127)
22:10:54 : ===FINISHED===
CAN ANYONE HELP ???
So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
itsbighead said:
Christ stop using the TOT method
Use the KDZ method in accordance with LG Flashtool 2014 and it should work
Click to expand...
Click to collapse
Agreed. I have just used that and the same firmware to downgrade from V20H and it worked like a charm.
Stransky
Sent from my GT-I9505 using Tapatalk
Issue Solved
Thank you for your advice. If worked perfectly. This method is much easier.
Issue Solved!
Different version after upgrade
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
dude.. have you returned it to D855 from D855V?
i got no signal here.. do you have?
Bump . Any update regarding http://forum.xda-developers.com/showpost.php?p=59087574&postcount=5?
guys i m also having same issue please help me out...and tell me from where i have to start and which file i have to download...please tell [email protected] is my email id...or msg me there
Guys i m also facing same problem,i also tried many kdz firmwares but always stuck on 2% then a new window open with retry option i tried many times but same,phone is stuck on firmware update
.i took info of my fone and i search firmware for it with suffix but download link not working.these are the link which match my fone suffix.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4BSF5E029EAPD13760ZRW/D85520E_00.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3D3H1E02T2A2ZD0781Z02/D85520F_00.kdz
any1 among all of you can download these file then can upload on google i will be very thankfull.
delamanga said:
Hi,
After using the KDZ method, my LG version has changed from D855 to D855V. As a result, It is very strange indeed, and as a consequence I cannot connect to the network. I get the "service disabled", "no Service" and sometimes it connects to the operator for some seconds. It is important to say that before the flash, the phone was working fine, and connected normally to the network.
Troubleshoot already done:
1 - Firstly, I flashed using the D85520B_00.Kdz file.
2 - When I realized that the error, I thought this might be a version problem, so I downloaded D85510e_00.kdz version and re-flashed downgrading to 4.4.2. However problem remained.
What should I do? I am running out of ideas.
Thanks in advance
Click to expand...
Click to collapse
Hello , well i'am facing the same probleme did you find a solution ?
bafless said:
Hello , well i'am facing the same probleme did you find a solution ?
Click to expand...
Click to collapse
Did you find any solution cause im facing that problem
the only solution for this problem is flashing firmware to model 850 ATT, BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0 because this phone model is D850 not D855, sorry my english is not good, use model hack dll mod.dll to change D855 at D850 stock firm with LG flash tool
can you upload here dll that you used to flash d855 with d850 firmware
klodidr said:
can you upload here dll that you used to flash d855 with d850 firmware
Click to expand...
Click to collapse
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
XDA will not let me post links to download file, send me your email and I sent it
delamanga said:
So I have this LG G3, that for some reason, couldn't connect to gmail. After reading some threads online, I decided to restore the original ROM (which for some reason was not the one installed). For that, I followed the tot tutorial in this website: http://forum.xda-developers.com/showthread.php?t=2785089
However, I cannot pass the 6%, and I keep getting the following error message:
## [ERROR] : Partition Change factory Partition (Phone!=tot)
[ 1:57:51] Port Close
[ 1:57:52] RefurbishProcess() Error.
[ 1:57:52] ¡Ú¡Ú ERROR REASON : Unknown Error
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] RunProcess() is fail.
[ 1:57:52] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:57:52] [ 1:57:51] ## [ERROR] : Partition Change factory Partition (Phone!=tot)
I am using the original cable, and I tried in several computers, different ports, so it is not a USB 3 port problem. I am pretty sure that I am using the right software (D855 V10e EUR), as described in all tutorials online. I have also followed the instructions carefully, and I have displayed in my phone : Firmware Update.
I am using the following versions:
DLL: LGD855_20140526_LGFLASHv160.dll
Software: LG Flashtoll 1.8.6.527
TOT: LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot
Actually, now my LG G3 gets "stuck" on the firmware upgrade, until the battery drains out. Even if I remove the battery, when I power it on, it gets back to that menu again.
So what am I doing wrong and how can I fix this problem??
Click to expand...
Click to collapse
my problem too
d855 flash with tot file
[ERROR] : Partition Change factory Partition (Phone!=tot)
Pretty much what the title says. My phone blue screens. This is the third time that it's happened in the past week...and I first installed it last week...lol
Got an LG G3 D855
Latest version of Paranoid Android
Did a completely clean install: using TWRP, wiped all available partitions, then flashed PA zip.
The first time it happened was the day I installed. I just kinda shrugged it off and went ahead with making it mine. And it happened earlier today and I went ahead and ignored that too. It just happened a third time (few hours after the second time; exact time after is shown below by uptime).
When it blue screened it gave me the following message on screen (without the astrisks)
*****************************
---------------------------------------------------------------------------------------
Subsystem Crash! : modem (susbsys-restart Resetting the SoC)
---------------------------------------------------------------------------------------
DemiGod Crash Handler : Subsystem Crash ! : modem (subsys-restart: Resetting the SoC)
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration
---------------------------------------------------------------------------------------
Board Info
rev.:1.0 speed,pvs: 3,7 serial : muhSerial
---------------------------------------------------------------------------------------
ERR crash log report. Version 3
Error in file wl1trm.c, line 404
Error message: WL1TRM: wl1_trm_grant_callback: Invalid Parameter(%d %d %d)
Time of crash(m-d-y h:m:s): 8-14-2015 21:32:46
Uptime (h:m:s): 5:12:38
Build ID: MPSS.DI.2.0.1.c1.13-0046-M8974AAAAANPZM-1
param: (0x5, 0x0, 0x0)
aux_msg:
qsdm_dbg_msg:
*****************************
Also, from what I've been able to find out, I think that that file might have something to do with radio functions, but I can't be sure because I just did a quick search.
Help would be greatly appreciated!
You should look in your device forum for help on this. I don't think it's a ROM specific issue. I'm pretty sure its a device specific issue
Try to Flash official stock Rom via KDZ or TOT&DLL method.
Greetings
So now I have completed two months of trials trying to fix this thing. I figured it's time to post something.
I have an LG G3 D855 32GB GCC (As it says on the box). The device was not booting so I tried removing the battery for a couple of minutes and putting it back. It worked for a while but now it's dead. I changed the battery and it's still the same thing.
I searched around and found people suggesting flashing the TOT file. So I went to download mode (it used to go there ) tried flashing and I got an error. I don't recall the error to be honest.
Now the device won't boot and won't show the download mode screen. However, it gets recognized as "LGE AndroidNet USB Serial Port".
I tried the KDZ method and it doesn't work. The TOT method gives me the errors below:
When I use LGUP8974.dll
PID: NULL
IMEI: NULL
[ 9: 2:27] CrossDL [] to [D855]. SWersion[]
000000064
Error: [ 9: 2:27] CrossDL [] to [D855]. SWersion
When I use LGD855_20140526_LGFLASHv160.dll
PID: NULL
IMEI: NULL
Model :
DLL : D855
SWV :
SWOV :
Model Information Check FAIL !
I'm not sure how bad the situation is or what exactly I'm doing wrong. I tried searching and trying everything and none is working.
Notes:
I'm not sure if I'm using a proper TOT the one I'm using says (LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot)
Searching using my IMEI in a website resulted with the SW (D85530D_00)
have u resolved the issue ?
Hello Guys
My friend ask me for get a Lineage OS to his H815 with Nougat. I agreed as I made few successful changes from stock to Lineage OS with Samsungs and older LGs (like L3 E400). But G4 is really more complicated, more than I expected . Firstly I wanted to unlock this phone with FWUL, so I download a VirtualBox emulated image with FWUL and after it boots I opened SALT program and it detects the phone. I made a basic backup and then I choosed Unlock G4 (UsU). After that some windows pop up. Last window was a pre-checking, when the bar gets to the end window closed and nothing more was happening. So after almost hour of waiting I just turned off the phone - I thought its all. After that while phone is booting I have those messages in the left top corner:
[820]-----------------------
[870]
[920] Secure boot error!
[970] Error code : 1009
[1020[ OFFICIAL !!
[1070]
[1120]-----------------------
Its booting, but only sometimes its normal boot, most starts are with bootloop, sometimes its start after 10 restarts, sometimes after 2nd restart, sometimes after plug in/plug out USB cable it starts boot normally (connecting cable only to phone, not to PC), sometimes only thing that helps is to take out the battery. I made full wipe to be sure that its not a software problem, but only thing I achived with that is fact that phone has a Nougat and now it have a Marshmallow. It is (was?) H815, but now model name is LGLS991 (?), it gets very long until it shows software version (V20g), IMEI is unknow, even when I type *#06# I get the null response.
I can get into recovery, can put phone into download mode. But i'm not able to do anything to get LOS or a least Nougat.
I've read many, many tutorials how to get G4 working properly after unsuccessful unlock, but nothing helps. What I've tried:
1. Flashing stock Nougat for H815 with LGUP, installed USB drivers, proper DLL, set com to 41, but when I trying to flash, after a 4% i get error: KDZ file is invalid. Downloaded few KDZ firmwares, dont belive that every single one is invalid, there is something wrong with LGUP or with settings, but I cant find what
2. Flashing with LG Flash Tool 2014: tried both normal flash and cse flash and always stoping in the same moment, with "Connection to server failed. Try again in a moment". Read many tutorials about this error, none was helpful in my case.
3. Flashing with LG Flash Tool v1.8.1.1023 and a TOT file, but after select of dll and tot file and press the yellow arrow I get an error: "Failed PreviousLoad()"
Tried all this methods on second computer but without a luck.
What else can I try to get this G4 working properly? Maybe try to install some rom from stock recovery? But which rom will be ok and dont get things worst?
If you need more info dont hesitate to ask. Would be very greatful for any advices .
you definitely didn't read enough... go to read again the UsU thread and as you've read the whole tutorial, you can also read the whole FAQ and the OP, because 90% of what you pointed out in your publication (which incidentally is in the wrong section) is explained there.
A quick advice: Don't try to flash any KDZ/TOT again.