so,
after trying to install cm11 like a madman and failing over and over again , i've installed sphix 2.0. the installation went fine and the phone booted up.
i tryed going into the recovery from rom manager and got stuck on lg screen . did a restart and tryied going to recovery using goo im. faild. and got stuck on lg screen. tryied powering the phone down and pressing the power button and volume up. nothing.
(what is the exact procedure of the button configuration for getting into recovery?)
the status now is that when i try to start the phone the lg screen apears i have one set of rainbow color in the home button. the led goes off and than i'm stuck with the lg logo.
please help! this is the first time that something like this is happaning to me anf i don't have a spare phone!!!!
amirnew said:
so,
after trying to install cm11 like a madman and failing over and over again , i've installed sphix 2.0. the installation went fine and the phone booted up.
i tryed going into the recovery from rom manager and got stuck on lg screen . did a restart and tryied going to recovery using goo im. faild. and got stuck on lg screen. tryied powering the phone down and pressing the power button and volume up. nothing.
(what is the exact procedure of the button configuration for getting into recovery?)
the status now is that when i try to start the phone the lg screen apears i have one set of rainbow color in the home button. the led goes off and than i'm stuck with the lg logo.
please help! this is the first time that something like this is happaning to me anf i don't have a spare phone!!!!
Click to expand...
Click to collapse
Do you have ADB installed? If you do, just open cmd...type cd...then type the name of folder where adb is installed, then press enter. Type adb reboot recovery. That should boot you back to recovery so that you can flash what you need.
If that doesnt work...press and hold down the volume buttons(while phone is off)....then plug it in to your computers usb port. Your phone should say download mode. You need to download LGFlashTool, your original lg stock firmware and a dll file to get you back to stock. Hope this works.
amirnew said:
so,
after trying to install cm11 like a madman and failing over and over again , i've installed sphix 2.0. the installation went fine and the phone booted up.
i tryed going into the recovery from rom manager and got stuck on lg screen . did a restart and tryied going to recovery using goo im. faild. and got stuck on lg screen. tryied powering the phone down and pressing the power button and volume up. nothing.
(what is the exact procedure of the button configuration for getting into recovery?)
the status now is that when i try to start the phone the lg screen apears i have one set of rainbow color in the home button. the led goes off and than i'm stuck with the lg logo.
please help! this is the first time that something like this is happaning to me anf i don't have a spare phone!!!!
Click to expand...
Click to collapse
you wont be able to get to recovery(trust me i know). Download lgflashtools, your phone model's kdz or tot file (KDZ for E988, F240, tot for E980) and flash. there is a detailed tutorial with all necesary files. I hope you made a backup on your sd card becasue you are about to loose everything on your internal storage. In the weird case that you have an E980 and flashtools does not recognize your device(shows a fail message), use the flashtools for the international version and flash either stock panama or telcel firmware.
The issue resolved using the lg flash tool. Thanks for everybody
Related
Hello, So i tryed to flash to CM10 rom for LG E970 and my screen went black after reboot. So then I tried t go back to stock with LGNPST and it would get to the logo and stop. So then (lol) I tried using a teenybin instead and now I can't get download mode to show up and all the screen will do it show a gray battery with a lighting bolt and sometimes when trying to power on or get to download mode it'll act like it's about to do something and shows a black screen with google in grey and an unlocked lock at the bottom of the screen. Help is all lost or can i fix this??
Dreadingdawn said:
Hello, So i tryed to flash to CM10 rom for LG E970 and my screen went black after reboot. So then I tried t go back to stock with LGNPST and it would get to the logo and stop. So then (lol) I tried using a teenybin instead and now I can't get download mode to show up and all the screen will do it show a gray battery with a lighting bolt and sometimes when trying to power on or get to download mode it'll act like it's about to do something and shows a black screen with google in grey and an unlocked lock at the bottom of the screen. Help is all lost or can i fix this??
Click to expand...
Click to collapse
Use the KDZ Updater with the latest firmware version of your phone...
First, download and install the latest lg driver. (your phone must be unplugged when installing)
Second, download the LG E970 kdz.
Third, "google" and install the kdz updater.
Fourth, put your phone in "Download mode" by pressing both volume keys and plug into usb port (wait 2-3 seconds, your computer will load the driver)
Fifth, open the kdz updater and select "3GQCT" in type...and "CS_Emergency" in phone mode. Then browse & select the kdz you've just downloaded...and press the Launch button. It should take about 8-10 minutes to complete...your phone will reboot around param.94 then you can unplugged it and let it boot normally.
Finally, make a "factory reset" to erase all previous data and plug your phone to wall charger to gave him some fresh blood.
Give us some feedback & good luck :good:
Sent from my AOSP on geeb_att_us using xda premium
Dreadingdawn said:
Hello, So i tryed to flash to CM10 rom for LG E970 and my screen went black after reboot. So then I tried t go back to stock with LGNPST and it would get to the logo and stop. So then (lol) I tried using a teenybin instead and now I can't get download mode to show up and all the screen will do it show a gray battery with a lighting bolt and sometimes when trying to power on or get to download mode it'll act like it's about to do something and shows a black screen with google in grey and an unlocked lock at the bottom of the screen. Help is all lost or can i fix this??
Click to expand...
Click to collapse
Try to get in donwload mode pushing together volume+ and volume- and then plug in the usb cable (to your pc) do not release the buttons until you see the download mode logo on the screen. The phone has to be off before doing the procedure if it wont turn off , push the power button for something like 15 sec, should go off that way
Good luck and in the event that you can't go in download mode anymore , take it to assistance. It's the only way.
JasonBourne.Qc said:
Use the KDZ Updater with the latest firmware version of your phone...
First, download and install the latest lg driver. (your phone must be unplugged when installing)
Second, download the LG E970 kdz.
Third, "google" and install the kdz updater.
Fourth, put your phone in "Download mode" by pressing both volume keys and plug into usb port (wait 2-3 seconds, your computer will load the driver)
Fifth, open the kdz updater and select "3GQCT" in type...and "CS_Emergency" in phone mode. Then browse & select the kdz you've just downloaded...and press the Launch button. It should take about 8-10 minutes to complete...your phone will reboot around param.94 then you can unplugged it and let it boot normally.
Finally, make a "factory reset" to erase all previous data and plug your phone to wall charger to gave him some fresh blood.
Give us some feedback & good luck :good:
Sent from my AOSP on geeb_att_us using xda premium
Click to expand...
Click to collapse
Rockguy40 said:
Try to get in donwload mode pushing together volume+ and volume- and then plug in the usb cable (to your pc) do not release the buttons until you see the download mode logo on the screen. The phone has to be off before doing the procedure if it wont turn off , push the power button for something like 15 sec, should go off that way
Good luck and in the event that you can't go in download mode anymore , take it to assistance. It's the only way.
Click to expand...
Click to collapse
Hey thanks for the help guys :good: but it's not even charging anymore and has died lol so i'm gonna let the nice folks over at mobiletechvideos.com JTAG it. Again thanks!! :fingers-crossed:
I have a F400K G3 (Korean Olleh). It's rooted and bumped. I flashed the bumped TWRP image via Flashify and rebooted recovery via Flashify. It works. But when I try boot to recovery from a complete shutdown. It just boots into safe mode. I did exactly what was stated in the Bump thread (Power+V. Down, when logo appears, release then press again quickly) and also tried substituting V. Down button with V. Up, but it still wont boot to recovery. It just keeps going into safe mode. The video provided in the thread was using an AT&T model so maybe it differs from every variant. I want to know if I'm doing something wrong or the instructions are wrong.
Thank you.
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
DelBoy said:
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
Click to expand...
Click to collapse
I have tried it as well without releasing. Does the same thing. And it never shows the reset screen. It just goes directly to the boot animation. Rebooting from Flashify also doesn't show the reset screen but it does get to TWRP. But I need to boot it from complete shutdown because I'm gonna test a Flashable zip ROM without root so rebooting using Flashify would be impossible.
Bump.
Seriously. Anyone?
I am subscribing because I have the exact same problem. I have tried every key combination I could find for the G2 and G3 but no luck...
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
sprremix said:
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
Click to expand...
Click to collapse
No, I am not connected to USB. If I reflash the recovery using ADB will it work? But I do have some worries because I'm using KitKat bootloader on a Lollipop Stock-based ROM (here) and I think I may get some errors.
It's not very important right now because I have root now and can reboot to recovery using Flashify.
I think all korean models cant enter recovery via hardware keys, mine is F400L and have the same problem.
Untouched LG G3
I have a completely untouched LG G3 uk version only official software no root etc and mine won't go into hard reset mode. I have tried 3 or 4 times it always goes into safe mode
same issue
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
rhtash said:
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
Click to expand...
Click to collapse
Turn off the phone completely. Press and hold Power and Volume Down. When the LG logo appears, release. After a split second, press volume down and volume up. White screen asking you to reset will appear. Press Yes two times using Volume buttons.
UP!!!
Any remedies? I justed from stock to cm12 LG g3 F400L..
Cant go to recovery mode. Cant flash anything..
Same prob,always going to safemode.f400k rooted,cloudy2.5
i've Lg g3 F4ooL and using Resrruction remic 5.5.5
I stuck in a Bootloop and my device is also not booting into Recovery or safe Mode.
Lg flash Tool is also not Connecting to my device in Downloadmode.
I think There is NO solution At ALl
Has anyone solved this issue?
to get in recovery on F460s, worked on mine, Press Vol-up + Power, as the logo appears release the keys and press Vol-up + Vol-down, you will boot into recovery.
I have the same issue, cant go into recovery using hard buttons on F400K. Any one able to succeed in this?
Same issue on LG G3 F460S, no combination of power + volume buttons + releasing them and pressing again when LG logo appears works. The device go straight into booting system and gets stuck. Is there any other method - maybe short-circuit some pins on the motherboard, to boot into recovery or do a system reset? Please...
OK, turns out that the combination is different for Korean models of G3, as misbah711 wrote, volume UP + power, when logo appears, release and press both volume UP + volume DOWN. If that does not work, try again, but release only the POWER button and press immediately volume DOWN (while volume UP was held all the time). Also, I first tried it without the back cover, as I have to remove battery to turn it off, did not work. Then with the cover it did, not sure if it's an important detail or not.
However it's not the end of the story for me. An image with Korean text appears, and nothing. No combination of power and volume buttons pressing does anything. I'm attaching the image. Also tried a web service to do Korean OCR and then used Google Translate - does not make any sense. Could anyone advise how to proceed and do a factory reset on this device? It won't boot into the system (gets stuck), no adb or any other communication with it.
Edit:
Turns out that when the Korean text appears and I connect USB cable to my PC, adb works correctly. Typed:
adb reboot recovery
The phone rebooted into recovery and now I'm doing a factory reset on it. Looks like all will be fine.
i have d851 on stock kitkat. I flashed TWRP and Philz but no way i can get into recovery mode. it always goes to fastboot mode no matter how I reboot into recovery. Now i am looking for stock recovery image. or a way to fix the twrp/philz. ROM boots just fine.
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
I need help as well
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
I tried to Flash twrp-2.8.0.0_d855-signed.img for TWRP Bootlader and got the same problem. Did i done some thing wrong pls I need an assist.
droids4lyfe99 said:
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Worked for me also! I just exited the factory reset menu and it booted up normally! Thanks for the help!
you're skating on very thin ice if you are flashing anything to your device that is not specifically for that model..
Cant fix the issue
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Download mode?
freddyjgv said:
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Click to expand...
Click to collapse
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
lazzarusbr said:
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
Click to expand...
Click to collapse
didnt tried but i want to get into recovery mode so i can full backup and flash cloudyg3
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
any solution?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
Did you fix the issue?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
lazzarusbr said:
yoy can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
okey so im gonna try this http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767
GUYS DO IT LIKE HERE http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
WORK PERFECT!!!
Hi,
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Any solutions yet?
Thank You lazzarusbr!
You Sir saved me a lot of reading
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
---------- Post added at 04:38 PM ---------- Previous post was at 04:34 PM ----------
You Sir saved me a lot of reading !
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
Had the same problem few minutes ago, then I just hold power button to reset the phone and it worked but I dont know if TWRP is installed now..?
did you try factory mode..
lazzarusbr said:
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
This saved the day for me! Thank you so much!!!!!
freddyjgv said:
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
Click to expand...
Click to collapse
Mate, thank you a lot, you just saved my life.
I can't even express how thankful I am because my device almost got bricked and you just saved me. Thanks a lot !
It means not fully load.
Try to install the AUTORECAR in the Play Store.
Lol. The same thing happened to me on LG-D855. I flashed the TWRP recovery zip and new my phone is literally unusable. It doesn't boot into recovery or into anything else. Sigh.
Hi
I have LG G3 of AT&T that says D850.
I tried flashing it with a custom rom and after i restarted, it keep going into FASTBOOT mode and i couldnt open the phone.
I tried FlasTool to goto stock rom but it kept saying that the device model mismatched with the rom (i downloaded the ATT D850 dll and TOT).
After that i tried erasing the recovery, aboot, laf through fastboot. Just after i erased it my battery went out and phone goes off.
Now i cannot even turn on my phone. it show no screen at all.
However if i connect the USB, my pc detect something as a removeable device on computer.
Is there any way i can unbrick it?
Take battery off for few secs and put it back. Press power button and volume down at same time. When lg logo appears release and press again. You'll see white page with warnings. press 2x yes and you are now in twrp recovery mode.
Try factory reset. If doesn't help try install any rom from sd card or ext card.
bitpie said:
Take battery off for few secs and put it back. Press power button and volume down at same time. When lg logo appears release and press again. You'll see white page with warnings. press 2x yes and you are now in twrp recovery mode.
Try factory reset. If doesn't help try install any rom from sd card or ext card.
Click to expand...
Click to collapse
There is nothing appearing by pressing the power button.
After I erased boot, recovery from fastboot, the LG logo stops appearing and phone is behaving like its not even starting up.
Even in flashtool, it doesn't show any model number or imei now.
Earlier if was showing as D8559
power and vol down together. If nothing then i would search how to unbrick
bitpie said:
power and vol down together. If nothing then i would search how to unbrick
Click to expand...
Click to collapse
No luck with power and vol down or up.
Can you please search something else to unbrick it??
Try http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html?m=1
Or
http://forum.xda-developers.com/showthread.php?t=2772199
bitpie said:
power and vol down together. If nothing then i would search how to unbrick
Click to expand...
Click to collapse
bitpie said:
Try http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html?m=1
Or
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
I tried both but flashtool is not recognizing my device, it shows no imei and pid.
Plus my device is d850 but it shows the error that device model is mismatched with the files however I downloaded the d850 files.
Dude you hard bricked it. I fell into the same exact situation. Came to flash stock but faulty win8 drivers caused my flash to fail at 14%...and everything went horribly wrong.
you can see a reply i wrote earlier that can help you:
http://forum.xda-developers.com/lg-...overy-mode-t3162652/post61991431#post61991431
BUT both links in the reply are to fixing a hardbrick for international D855 models and i am not sure if they will work with you.
Honestly your phone is not dead. There is many ways to fix it...if not now then eventually. You can find many threads with the same problem. Honestly i was sick to my stomach when it happened to me...you must be patient and make sure you read everything carefully before doing anything and I'm sorry this happened to you
Good luck!
Soo.... I messed up and edited the build.prop specificly the ro.build.type property. I tried to enable some debug options without validating if this would be a good idea (hint: it's not).
It seems that this has bricked my phone, the first LG splash screen shows up with the powered by android, and the second animation just keeps loading forever (making the phone very hot). And the LED flashes blue continously.
I did manage to get the device visible in ADB but it tells me that the device is offline so I can't do anything with it.
Tried booting in recovery mode (holding power button + volume down) but it just own't go into recovery mode.
Some extra info of what runs on my phone:
- version H815
- Android 6.0
- bootloader unlocked
- TWRP installed
- Rooted
- XPosed installed
Any idea on what I could try to fix it? (I guess stuck with a brick but oh well).
Thanks!
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Thanks for the replies!
Vortuks said:
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Click to expand...
Click to collapse
I meant that it just boots 'normally' when I press those buttons, it shows me the first LG logo and the second animation just hangs, whatever I do. I tried all sorts of combinations with the power button + volume down. (Keeping it pressed, briefly letting it go after the lg logo and repressing them).
jinderation said:
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Click to expand...
Click to collapse
I don't know exactly which firmware I was on but I can't even get my phone into download mode (same as my other response, pressing volume up doesn't do anything).
The recovery and download mode used to work but I have no idea why it doesn't now...
When booting the phone, hold the power button and volume down button simultaneously, when LG logo appear, push the power button again. You should see the white screen, where you choose "YES" twice. Then the phone should kick you into TWRP or different recovery mode.
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Vortuks said:
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Click to expand...
Click to collapse
Maybe he has bootloop issue... ILAPO
Yeah I have no idea why the buttons aren't working for me. After a lot of searching I found this thread:
http://forum.xda-developers.com/g4/help/soft-bricked-device-t3248144
Which is basicly the same thing I'm experiencing, ADB comes online for just a brief second (kept spamming the reboot recovery command) and got in TWRP and I just flashed another which worked fine.
Odd thing is, even now my phone works I can't start recovery or download with the hardware buttons...... oh well, thankfully adb works as it's supposed to.
Thank you all for your help!