My LS980 didn't work with my GSM sim card, i guess it is locked, i have a red cross near signal bars.
I tried diferent solutions to unlock the phone. Then I flash the Cloudy G3 rom and KK_Baseband, but on it I receive "BaseBand version : Unknown".
Then I tried to flash stock rooted ZVC firmware from this tred : http://forum.xda-developers.com/showthread.php?t=2754167. And after that I get contionious "Unfortunately com.android.phone has stoped" when the sim card is in the phone. I tried to reflash the rom, and also diferent rom from here (http://forum.xda-developers.com/showthread.php?t=2590234) but it doesn't help me =(
Please help !
Sorry of my English.
com.android phone has stopped
Get build prop editor from play store ,the find
ro.build target operator change from SPR to spr,phone should work but stock messaging app wont ,i havent figured out how to get both to work yet
So I had the same problem, could you fix this?
Related
I have a strange issue. With SIM from Finnish operator Elisa, com.android.phone crashes once always after rebooting the phone. Trying with SIM from other operator (DNA in this case) doesn't give that error.
Phone works fine after the crash message. I've tried with stock ROM 4.0.2, 4.0.4, and also with few custom ROMs.
The stock ROMs I've tried with have been with locked bootloader and everything being reset to stock. Also I've tried with different radios. Only with non-Elisa SIM the error doesn't appear.
Anyone run into this? Should I take this to Elisa, Google or Samsung?
Have you tried a different SIM from Elisa? Maybe the one you have is faulty.
No I haven't. Will need to find someone with Elisa SIM.
Any update on this one? Did you get another SIM?
I'm having the same issue with Elisa SIM. Tried 3 different stock ROMs on my Galaxy Nexus.
Same SIM still, but looks like issue doesn't exist anymore on 4.2.
Sent from my Windows 8 device using Board Express
HI,
I'm having this error message on boot and I can't find a solution. Every search I've made for this error comes up empty. The final solution being restore to factory. After doing that and trying to reinstall the rom I get the same error. Phone FC and i don't get time synched from the network anymore.
I'm not using TB. I'm not restoring any data. This is on a fresh clean install of the rom.
Any ideas? I need help!
What did you flash in terms or rom, mods, themes, and how did you flash?
Sent from my Galaxy SII T-mobile using Tapatalk 2
I flashed the new Darkside rom with the TMO base. I'm starting to think that the new base is conflicting with my sim card... I'm not sure what to do about it... I'm with Virgin Mobile in Canada if that makes any difference...
No mods and no themes. Its just on first boot. Any other base seems to work fine. But since the TMO base I get that FC.
Could be a bad download, unlikely but if you haven't tried yet re-download the ROM
I've redownloaded multiple times and checked the md5... so the dl itself is fine... the install is fine... but once it connects to the network com.android.phone force closes... Do you know how to reset the network settings on the sim card itself?
process com.android phone has stopped
Hi,
My HTC One XL from Rogers is doing this when the address book syncs in the car. I have it de-bloated, rooted, and unlocked boot loader. My problem is that nothing seems to have changed. The phone works (Bluetooth )in the car until the address book is synched (or so it seems), then it cuts out. What to do?
Same problem with my ROM. I am using Reliance GSM in India. I tried with Vodafone & Airtel SIM and the phone works perfectly normal. Tried with my Dad's Reliance GSM and the problem is back. Dunno what the problem is exactly. Other ROMs work perfectly fine with Reliance in my cell. Problem is only with this one ROM. Incase you stumble upon a solution, pl do let me know as well.
My Original ROM with the same error
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!
On some ROMs, they say it has something to do with the DPI
I've encountered this problem on AOKP 07/09 Milestone 6, and from searching in the forums, all I could gather is that it has something to do with my DPI settings.
On 07/05 it was okay, I just don't get it why flashing to 07/09 made this error appear.
UPDATE Now I discovered that turning the phone into Airplane mode removes this error. But then if you deactivate airplane mode again it comes back.
msanl said:
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!
Click to expand...
Click to collapse
Why dont you post in the S3 forum?
Hi Guys, I have a E988 HK version 10D Stock Rom. I found the signal is not stable at all.
As my mobile carrier does not support 4G, so have seleted the network to 2G/WGCDMA.
I found the phone lost signal completely and then it has an error saying sim invalid, but when I reboot the phone, the signal became good again. This is very painfu as I needed to reboot my phone a few times a day.
Can someone give me an idea please? Thanks.
Sounds like modem problem try to install a different stock rom or a new modem
Hi,
After flashing one of the CM11 nighties I started getting the message "error while searching for networks" when as msg says searching for networks, I found out too I can't use any USSD code I get the message "Connection problem or invalid MMI code" however I am connected to my local network and able to use LTE.
Flashed the latest modem version and for some time it works but now again it doesn't work, attempted flashing again and issue persists.
Attempted a newer version and switching to Paranoid and issue also persists.
Help?
My device is a SGH-i747m from Telcel (Mexico).
Does this happen with a completely stock ROM?
Sorry for late reply, my phone got bricked
Anyway, I was able to use USSD codes again after going back to 4.1.1 stock, therefore the problem is either 4.3 or the modem upgrade which disabled USSD codes.
My previous LS990 worked charm with GSM networks. But recently purchased LS990 shows signal for like first minutes, then shows "Insert valid sim and reboot" message. hen reboots itself. after that sim is not recognised. The sim works fine on other phones. and tried many sims on this LS990, all failed.
Flashed KK, LP, MM stock with GSM unlock files, Fulmics rom, cloudy and AOSP. Fulmics seems to cath signals bit longer than other OSs, but it fails too.
Is this related to some hardware issue? but the thing is phone catches GSM signals flawlessly before above mentioned "Invalid sim" message. after that No sim is detectable.
Can anyone help me to fix it please? I would do a help to help. Donation :highfive:
GTRanushka said:
My previous LS990 worked charm with GSM networks. But recently purchased LS990 shows signal for like first minutes, then shows "Insert valid sim and reboot" message. hen reboots itself. after that sim is not recognised. The sim works fine on other phones. and tried many sims on this LS990, all failed.
Flashed KK, LP, MM stock with GSM unlock files, Fulmics rom, cloudy and AOSP. Fulmics seems to cath signals bit longer than other OSs, but it fails too.
Is this related to some hardware issue? but the thing is phone catches GSM signals flawlessly before above mentioned "Invalid sim" message. after that No sim is detectable.
Can anyone help me to fix it please? I would do a help to help. Donation :highfive:
Click to expand...
Click to collapse
You can try to flash modem only. Once i messed up some settings on the phone trying to unlock LTE bands and after that my signal was coming and going whole time, but no "Insert valid sim" message appeared. just on off. I have flashed ZVC modem from recovery and it worked fine. make backup of everything just in case and flash it.
idinaxui said:
You can try to flash modem only. Once i messed up some settings on the phone trying to unlock LTE bands and after that my signal was coming and going whole time, but no "Insert valid sim" message appeared. just on off. I have flashed ZVC modem from recovery and it worked fine. make backup of everything just in case and flash it.
Click to expand...
Click to collapse
I tried. But no luck. Thanks for help though
anyone?
Man i have the same problem I've tried everythings and nothing works i guess if we try to unlock with box will be fixed
racav1904 said:
Man i have the same problem I've tried everythings and nothing works i guess if we try to unlock with box will be fixed
Click to expand...
Click to collapse
Same here bro. Gonna try the box method on this 15th. Will update you about results.