[Q] Unable to search networks - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hi,
After flashing one of the CM11 nighties I started getting the message "error while searching for networks" when as msg says searching for networks, I found out too I can't use any USSD code I get the message "Connection problem or invalid MMI code" however I am connected to my local network and able to use LTE.
Flashed the latest modem version and for some time it works but now again it doesn't work, attempted flashing again and issue persists.
Attempted a newer version and switching to Paranoid and issue also persists.
Help?
My device is a SGH-i747m from Telcel (Mexico).

Does this happen with a completely stock ROM?

Sorry for late reply, my phone got bricked
Anyway, I was able to use USSD codes again after going back to 4.1.1 stock, therefore the problem is either 4.3 or the modem upgrade which disabled USSD codes.

Related

[Q] Invalid MMI code

Hello everyone i'm stuck with "connection error or invalid mmi code" since weeks and i'm not able to recover from it i've wide data/cache and nearly done everything i even change roms to roms.Firstly when i was on stock rom then there were no problems but as soon as i flashed leaked full sbf 2.3 on my defy and then i was not able to go back to stock then someone on this forum showed me the way to go back to 2.1 then then finally using nandroid backup i came back to froyo but that rom was not happening so i flashed CM 7.1 the problem starts from here or from nandroid so i decided to go to MIUI but the problem persits. So then i fully formated my memory card and then again went to 2.1 then froyo then to galnet MIUI i thaught that the problem has gone but some time when i call my cell no from my landline then it says nothing except blip blip that means i was not recheable.then i run USSD code and then finally it says "connection error or invalid mmi code" i'm stuck guys please help what should i do now my operator is Aircel india should ithrow my sim card or my phone i'm fed up with this problem can anyone suggest me a fix.
Any Help Would Be Appreciated
Regards,
h33t c01d
ok dont know if it will work for you but it worked for me
add comma (,) in the end of the code
example:
*100*2# into *100*2#,
works for me
I have the same problem with my Defy.I cant make calls, send sms, check my credit..nothing.

Unfortunately, the process com.android.phone has stopped

HI,
I'm having this error message on boot and I can't find a solution. Every search I've made for this error comes up empty. The final solution being restore to factory. After doing that and trying to reinstall the rom I get the same error. Phone FC and i don't get time synched from the network anymore.
I'm not using TB. I'm not restoring any data. This is on a fresh clean install of the rom.
Any ideas? I need help!
What did you flash in terms or rom, mods, themes, and how did you flash?
Sent from my Galaxy SII T-mobile using Tapatalk 2
I flashed the new Darkside rom with the TMO base. I'm starting to think that the new base is conflicting with my sim card... I'm not sure what to do about it... I'm with Virgin Mobile in Canada if that makes any difference...
No mods and no themes. Its just on first boot. Any other base seems to work fine. But since the TMO base I get that FC.
Could be a bad download, unlikely but if you haven't tried yet re-download the ROM
I've redownloaded multiple times and checked the md5... so the dl itself is fine... the install is fine... but once it connects to the network com.android.phone force closes... Do you know how to reset the network settings on the sim card itself?
process com.android phone has stopped
Hi,
My HTC One XL from Rogers is doing this when the address book syncs in the car. I have it de-bloated, rooted, and unlocked boot loader. My problem is that nothing seems to have changed. The phone works (Bluetooth )in the car until the address book is synched (or so it seems), then it cuts out. What to do?
Same problem with my ROM. I am using Reliance GSM in India. I tried with Vodafone & Airtel SIM and the phone works perfectly normal. Tried with my Dad's Reliance GSM and the problem is back. Dunno what the problem is exactly. Other ROMs work perfectly fine with Reliance in my cell. Problem is only with this one ROM. Incase you stumble upon a solution, pl do let me know as well.
My Original ROM with the same error
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!
On some ROMs, they say it has something to do with the DPI
I've encountered this problem on AOKP 07/09 Milestone 6, and from searching in the forums, all I could gather is that it has something to do with my DPI settings.
On 07/05 it was okay, I just don't get it why flashing to 07/09 made this error appear.
UPDATE Now I discovered that turning the phone into Airplane mode removes this error. But then if you deactivate airplane mode again it comes back.
msanl said:
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!
Click to expand...
Click to collapse
Why dont you post in the S3 forum?

[Q] Error searching for network

EDIT: Fixed. I had already tried flashing updated stock roms before flashing CM9 and it didn't seem to help but I tried a few more, and the one called "R800_4.0.2.A.0.79.ftf" fixed it. After that I wiped everything, installed cm9 again and now it gets a signal
original post:
I installed CM9 on my Xperia Play and now it doesn't properly detect the SIM card. It says "No service" and when searching for available networks it gives an unhelpful message "error searching for network". If I try to add the APN manually it gets ignored.
I've seen other people with this problem but every solution I've found has been things I've already done, or broken links.
I updated my baseband using Flashtool but it didn't help and in fact the phone seems more sluggish now after doing that.
The SIM works fine in another phone. These are all unlocked devices.

Continious : "com.android.phone has stopped"

My LS980 didn't work with my GSM sim card, i guess it is locked, i have a red cross near signal bars.
I tried diferent solutions to unlock the phone. Then I flash the Cloudy G3 rom and KK_Baseband, but on it I receive "BaseBand version : Unknown".
Then I tried to flash stock rooted ZVC firmware from this tred : http://forum.xda-developers.com/showthread.php?t=2754167. And after that I get contionious "Unfortunately com.android.phone has stoped" when the sim card is in the phone. I tried to reflash the rom, and also diferent rom from here (http://forum.xda-developers.com/showthread.php?t=2590234) but it doesn't help me =(
Please help !
Sorry of my English.
com.android phone has stopped
Get build prop editor from play store ,the find
ro.build target operator change from SPR to spr,phone should work but stock messaging app wont ,i havent figured out how to get both to work yet
So I had the same problem, could you fix this?

Mobile Data much too slow, cant unlock phone because mmi codes are invalid

Hi,
following problem to my LG P930:
I got it as a present because my old phone was crashed. First I wanted to do with the P930 is to get root access and flash CM to it. This was difficult enough, but now I have a problem where I coundn´t find any information.
With original firmware (I think it was 2.2.6 or 2.3.6) LTE was working. Now, with the last CM 11 and with CM 10.2 LTE dowesn´t work. I can ping any homepage with the terminal, but the speed for downloading is just at 40k/s, really really slowly.
I found, that maybe LTE must be unlocked by an unlock-code. Therefore I have to open a menu under the number 2945#*930#, but when I call this, just the msg appears, "Connection problem or invalid MMI code". Most of all #* calls do not work at all!
I tried to fix it, but all methods I found are for MTK devices, but the P930 has a snapdragon cip.
The *#06# call works, my IMEI is valid, I can make calls and send sms, the Internet works, but much too slow for daily use. My Sim Card gets access to o2 network in Germany.
I tried 3 CM ROMS and different settings in APN and mobile networks, but nothing works.
I tried to get network access with a Telekom SIM, but there I couldn´t get any access, so I wasn´t able to make calls, neither sms nor Internet.
does anyone have an idea how to solve this issue? Is that correct, thinking that mobile data doesn´t work because the phone is unlocked?
PS: only thing I found is in this thread, is to rename modemfs folder.
But I don´t understand what eduds mean in post 8, and his problem is not exactly the mine, because his mobile data doesn´t work at nothing.
http://forum.xda-developers.com/showthread.php?t=2567399
Thanks for response, regards from Germany

Categories

Resources