htc desire mode auto after water and problem - Desire General

the other day it went a little water to my htc desire froyo rom and I rode half an hour after I have left in acccensione fastboot screen ... blocked for 10 minutes and then restarts rom ... after a couple of hours the back button works more, and still reboot fastboot screen. I remove the battery and restart several times but after a while '... same problem ... with even more original rom does not read usb cable from pc and phone, when attacks cable does not detect it ... putting a rom cooked midway detects cable and usb mass storage .... but with original ROM by power-on auto mode active and if you call the part with the hands-free cell with the rom cooked .. no problem .. but I did not understand that it happened 'cause I can not replace more rom original file and I washed again with the usb and instead cooked crashes after a while?'ve flashed with various rome but nothing .. what can I change?

Related

sprint touch not booting any screen ...help

while doing the gps upgrade, I was doing step 4 (Run the Alltel ROM exe file ) it failed at 8% then sent me to a recovery page after i removed the battery my touch wont do anything ,i tried soft reset ,camera and even hard .the only time i see anything is when i plug a usb cable in ,just a red light in the speaker hole.
try getting it to bootloader (hold power button, camera button and soft reset button) it should display a tricolor screen. now just plug in the usb cable and reflash the same rom or a different one
tried that it didn't work
What is the bootloader version you are using? 0.4 or 2.31
If you see 2.31.CoKE, you should be fine, but read more, more, more!!!
Don't want to sound like I'm not helping, but I am no expert right now, so don't want to further cause damage to your phone.
So go here:
http://forum.ppcgeeks.com/showthread.php?t=24979
i'm having a somewhat related problem..
I rom updated.. phone works but get a USB not recognized error when i plug it into any xp box.
I guess i need to try an activesync cab file..
if that doesn't work.. i'll reflash a rom through SD method once i find out how.
Anyone got a link for that?

bootloadr hange up

i flashed my touch diamond with a cooked rom every thing went well untill 1st reboot after completing the flash then black screen with diamond touch logo and nothing i have tried soft reset many times usb cable is not detectable then i tried the program ECShift.exe
when i write ECShift.exe -bl in cmd it says "could not open EC!" so i can not use mtty please help what i can do with the device is it now broken for final or it can be repaired since i can not log in to bootloader
also when i switch it off and put the usb cable it indicates that it is recharging but when i try to turn it on it doesn't start and if i unplugged the usb cable now it still gives me the indication for recharging (whispering light)
usb is not recognized even when making hard reset without formatting the internal storage i get the colored screen the the 3 choices so fast even the diamond does not detect it is connected to pc it suppose to give me a screen writing usb
hi i have the same problem with diamond! you can fixed?tanks

Heeeeeeeelp!!!!!

If this is a spam, plz forgive me
Well, 2 all. I booted my Diamond with a 6.5 ROM. Normallt, it worked well. But this time, the ROM got some mistake that when it was goin' to finish, it froze it still kept the static in 30 mins later, and I got to reset it. Then, my Diamond restarted, and... froze at the Bootloader screen (3 colors screen) ( I tried all things to recover it, searching on the web, but nothing's ok I plugged it into my PC and my PC doesn't recognize it ( anyone knows out there plz help!!!!!!!
which version of windows operating system are you using. also try to reset and then again go into bootloader MANUALLY by pressing volume down key. see if the pc detects. also do you have ur stock rom?
meteorain08 said:
If this is a spam, plz forgive me
Well, 2 all. I booted my Diamond with a 6.5 ROM. Normallt, it worked well. But this time, the ROM got some mistake that when it was goin' to finish, it froze it still kept the static in 30 mins later, and I got to reset it. Then, my Diamond restarted, and... froze at the Bootloader screen (3 colors screen) ( I tried all things to recover it, searching on the web, but nothing's ok I plugged it into my PC and my PC doesn't recognize it ( anyone knows out there plz help!!!!!!!
Click to expand...
Click to collapse
enter bootloader, connect to PC. in white bar the 'Serial' will change to 'USB'
then you can run customeRUU to flash again
if the PC don't detect, try on other PC.
Well, if u know how to up ROM via PC then tell me, because I often up ROM directly on my Diamond, not via PC. And I plugged it to PC and the word "Serial" disappeared, but the word "USB" did not display on the screen
Did you make MTTY befor instal 6.5 rom try to make it and reinstal the rom

[Q] Need Help For Droid Inc *Major Problems* 5 beeps and green flashing light

OK. Im new to XDA and i have read alot of articles trying to fix my screwup. Hopefully someone can help. I was once rooted and i had redemption rom on and i tried to install cm30 nightly and got stuck somewhere and started to try to do wipe and clean amopngst other things and almost bricked it totally.The main thing that happens is when i press power i get 5 vibrate beeps and a blinking green light. i can go to hboot by pressing power and down but i cant go into recovery. Among other things i can plug usb and shows hboot usb but computer only shows android boot loader under device manager.
Now here's where it gets even weirder. I tried to install the pb113img.zip. when i did everything said ok while installing and when i got the choice to reboot it went to a green recycle looking thing then it went to a blank screen and 3 beeps with green blinking light.
I went into fastboot and hit reboot and it did boot into the stock 2.2 rom but if i disconnect a usb cord or when plugged into the wall the phone dies and goes to the blank screen with 5 beeps and blinking lights.
while in hboot the recovery choice is not working and neither is factory reset.
I hit fastboot the choice for bootloader takes me back to hboot.
Now while the usb plug is in the hboot says hboot usb but when i did get it to boot and plugged the usb in it doesnt show on my computer it does however show android bootloader interface on my device manager. Also the sdcard will not read on the phone but the sd card will read in a sdcard adpater where i can transfer files.
I have 2 sdcards and a sd adapter and htc usb cable and htc outlet charger and 2 batterys.
Here are my stats:
S-On
H-boot 0.92
touch panel-ATMEL224_16
radio- 2.15.00.07.28
Please somebody help me i been trying different methods but running into circles here.
If your S is on and it looks like it is and your running the stock 2.2 bring it in to the store and they will warranty it for you.
I did think about that because stock rom looks to be on and s-on as well just wondering if they could be able to tell through h-boot
Unfortunately this is a hardware error code, and you'll probably have to get it replaced.. My Inc came out of the box doing this (had it shipped to me), and the only option I had was to take it right back to the store.
I was able to boot mine normally if it was plugged into the computer at the time, so you might want to try that and see if you can at least verify the installed firmware. Otherwise, a warranty exchange is your only choice.
My incredible started doing the same, it all hapened when i mounted sd in recovery mode and then i was playing with diag mode to flash it. Since then its doing the vibrate and green light thing. Also I rooted it and my s is on. Also I can use the phone if i plug in the usb while turning on and then quickly take it out. Only problem is the phone doesn't detects the internal or external storage. I even got phone to be detected by unrevoked, but it is stuck as pushing recovery since phone doesn't detects the storage. BTW I already tried the Official PB31IMG zip.
Please any help is greatly appreciated.
Same issue flashing CM7 RC2. Could not fix it, Verizon is replacing it.
Here's a few threads to follow:
http://forum.cyanogenmod.com/topic/18381-bricked-my-incredible-installing-cm7-rc2/
http://forum.xda-developers.com/showthread.php?t=808294
It is probably a USB brick
I had the same problem with my HTC Legend a few days ago, it turns out to be a USB brick, which means something had corrupted the misc partition. The fix is simple, just flash a good misc image back to that partition and everything is back to normal, there are tons of USB unbrik TUTs out there.
Hope this could help.

[Q] GALAXY S2 - So weird [NEED HELP]

SHORT INTRO: My GF's phone, I am from PH [not living in Manila] so no reliable technicians, but my Gf brought it to one, the technician flashed it but I think it was fake or something becase it says Android 4.0, but exactly looks like Android 2.3, AND the phone keeps searching for network even if sim card is inserted. so I checked it myself.
I am frustrated and spent hours trying to fix this phone. AND I DONT GET IT!! WHY??
1.) I thought usb port is broken, but it was fine, i left the phone with charger connected for how many minutes, then it went on showing the battery charging animation.
2.) so i tried to boot, I SPENT HOW MANY MINUTES and TIMES PRESSING THE POWER BUTTON and it won't boot, I SMASHED THE POWER BUTTON [not hard tho], DISASSEMBLED AND CHECKED THE BUTTON, THEN TRIED AGAIN, THE SAME THING, but then IT WENT ON AFTER A FEW SECONDS, THEN I TURNED IT OFF[to prepare for installation of stock rom], THEN IT WONT BOOT, SOMETIMES WILL BOOT AFTER HOW MANY SECONDS OR MINUTES BUT WTF IS THIS. <<sorry :crying:
3.) i tried RECOVERY[stock] AND DOWNLOAD, it went into recovery mode ONCE, i tried wiping it all, "reboot system now" AND IT DIDN'T BOOT, IT WENT OFF, SO I AM BACK AGAIN TO NUMBER 2 PROBLEM. THEN IT WENT INTO DOWNLOAD MODE, but ODIN won't detect, I downloaded samsung usb drivers, the cable is from samsung, accessed the device manager[windows 10] and no device.
WHAT I TRIED/SEARCHED[NO LUCK THUGH]:
1.) turning it on without the use of power button [usb cable to computer, pressing volume up & down]
2.) turning it on with charger then removing battery quickly and reinserting it.
3.) i think everything, i've been searching all over the internet and here, no solution.
PLEASE! I need help. We've been planning to buy Galaxy S5 but we don't want this phone go into waste. This phone is over a year old. Is it because of the ROM? I really tried to boot into recovery but I don't understand problem number 2. PLEASE HELP! I'M DESPERATE :crying:

Categories

Resources