i just got this phone and i need to know how to root lol. i'm on 4.3 and the mjb modem. is there a way to root it?
pitbullmommy45245 said:
i just got this phone and i need to know how to root lol. i'm on 4.3 and the mjb modem. is there a way to root it?
Click to expand...
Click to collapse
Yes, there are a number of ways to root on ver. 4.3. First, you could try CF-Auto Root. Doesn't always work with this version but it's worked for several people. Secondly, you could flash custom recovery via Odin and then flash the pre-rooted and de-knoxed MJ2 ROM as long as you retain your MJB bootloader and modem. You can ensure this by flashing the MJB bootloader and modem at the same time. Thirdly, you could flash TWRP custom recovery (this method doesn't always work with CWM) via Odin. Then flash SuperSU zip via custom recovery. Download and install SuperSU from the Play Store. Run it and install the binary when prompted. The fourth and my preferred method is Safe Root. This option won't trip your warranty bit in case this matters and has worked for me all the time. You can check the SafeRoot download link and installation instructions via the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
A search of this forum for 4.3 root would have brought you the answer.
http://forum.xda-developers.com/showthread.php?t=2538991 You can fond your solution here.
Ian
w98seeng said:
A search of this forum for 4.3 root would have brought you the answer.
http://forum.xda-developers.com/showthread.php?t=2538991 You can fond your solution here.
Ian
Click to expand...
Click to collapse
thank you i was kinda wary of cf auto root. i tried it on a verizon one that i had and it always failed lol. but it worked on this one! lol. i had a s3 that was verizon and updated to 4.3 and i couldn't download any aosp roms and could only install i think it was mlb. with it being rooted this way can i install any rom? and do i need to install cwm or a recovery?
pitbullmommy45245 said:
thank you i was kinda wary of cf auto root. i tried it on a verizon one that i had and it always failed lol. but it worked on this one! lol. i had a s3 that was verizon and updated to 4.3 and i couldn't download any aosp roms and could only install i think it was mlb. with it being rooted this way can i install any rom? and do i need to install cwm or a recovery?
Click to expand...
Click to collapse
I just rooted yesterday again (after being on stock 4.3 touchwiz for the longest time, what a disaster). I used the CF auto-root method as well. I downloaded + flashed TWRP recovery using odin, and was all set to install AOSP roms. You can use CWM if you want but a few devs recommend TWRP so that's what I have stuck with.
DarthDerron said:
I just rooted yesterday again (after being on stock 4.3 touchwiz for the longest time, what a disaster). I used the CF auto-root method as well. I downloaded + flashed TWRP recovery using odin, and was all set to install AOSP roms. You can use CWM if you want but a few devs recommend TWRP so that's what I have stuck with.
Click to expand...
Click to collapse
are there any roms that you would recomend that are up kept up to date.
pitbullmommy45245 said:
are there any roms that you would recomend that are up kept up to date.
Click to expand...
Click to collapse
I'm using tasks aokp right now, he always provides stable and reliable releases. Quantum, SlimKat and LiquidSmooth are all ones I've enjoyed back in 4.2 days so I'm sure those are good as well
Sent from my SGH-I747M using Tapatalk
pitbullmommy45245 said:
are there any roms that you would recomend that are up kept up to date.
Click to expand...
Click to collapse
Also crom and validus are good choices.
Sent from my SM-T310 using Tapatalk
jasvncnt1 said:
Also crom and validus are good choices.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
i flashed carbons 6-1 nightly. its running super smooth.
Related
Thank you for taking time out of your day to help.
I just got an s4 on tmobile and I have some questions. I tried rooting it and ran into an error. I found an answer online, which was to flash a stock 4.3 rom via odin, then try the CFT autoroot. So it's all good and I'm rooted. I just have some questions:
1. Why was I able to flash a rom via odin, when all the rom installation guides I see require a CWM or some other recovery?
2. When I try to boot up into recovery I think it's the stock recovery and not a custom recovery that allows me to install a zip. When I used CFT auto root, I saw it booted into a custom recovery to root, did it just get deleted after that?
3. How will my root work with the 4.4 ota? When I check for software updates it says my phone has been modified so they aren't available. So how can I get the ota? Am i better off flashing a custom 4.4 rom? I want closest to stock as possible, so if you have any recommendations for stock 4.4 roms that would be great. Or can I flash the 4.4 stock rom as I did with odin?
4. How does tethering work with root? If I have unlimited data with 2.5gb tethering data, now that I'm rooted, can tmobile tell I'm tethering if I'm using a root tethering app?
Again thank you very much for your help.
1. You did not flash a ROM with Odin, it was firmware.. Very different
2. Yes, I believe that's what cf-auto root does
3. Yes you can flash a 4.4 firmware like you did with 4.3 as long as its for your device, or flash a custom recovery and then a 4.4 ROM
4. Not too familiar with this, but it might be possible to get around it
Sent from my SGH-M919 using Tapatalk
serio22 said:
1. You did not flash a ROM with Odin, it was firmware.. Very different
2. Yes, I believe that's what cf-auto root does
3. Yes you can flash a 4.4 firmware like you did with 4.3 as long as its for your device, or flash a custom recovery and then a 4.4 ROM
4. Not too familiar with this, but it might be possible to get around it
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Awesome thank you. If I flash the official 4.4 firmware for my device, will I keep my root?
gregorina said:
Awesome thank you. If I flash the official 4.4 firmware for my device, will I keep my root?
Click to expand...
Click to collapse
No if it is an untouched fully stock rom/firmware but there will be rooted versions of the stock firmware/rom.
Stay with root, you will be better off, custom roms are usually available within a day after ota updates
Sent from my customizable brickable device
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
So I updated to stock 4.3(I747M) via Odin, then flashed TWRP with Odin, then Flashed a 4.4 ROM with TWRP.
The Super SU app is failing to update the binary. And it's not giving root access to apps. Does this have anything to do with the MK5 bootloader?
I can't seem to find a fix? If someone could point me in the right direction, that'd be great.
Thanks!
Try flashing a another ROM such a Validus or CM11 as ROMs are pre-rooted.
Also, I prefer Philz Touch over TWRP. Maybe the recovery program makes a difference?
solaris11 said:
So I updated to stock 4.3(I747M) via Odin, then flashed TWRP with Odin, then Flashed a 4.4 ROM with TWRP.
The Super SU app is failing to update the binary. And it's not giving root access to apps. Does this have anything to do with the MK5 bootloader?
I can't seem to find a fix? If someone could point me in the right direction, that'd be great.
Thanks!
Click to expand...
Click to collapse
I did this procedure with the same bootloader on a Koodo phone, no problem. I I rooted and installed TWRP 2.6.3.1 and then I flashed Quantum ROM. Which ROM did you flash? (Oh, I see now you tried OmniRom.) Only difference with how I did it is I had already taken the stock OTA from Koodo.
jmppe3 said:
I did this procedure with the same bootloader on a Koodo phone, no problem. I I rooted and installed TWRP 2.6.3.1 and then I flashed Quantum ROM. Which ROM did you flash? (Oh, I see now you tried OmniRom.) Only difference with how I did it is I had already taken the stock OTA from Koodo.
Click to expand...
Click to collapse
Yeah I bricked my phone messing with bootloaders...used an SD boot image to get to download mode and odined stock 4.3. Odined twrp. Twrp flashed omni's latest build. Does omni not come prerooted? That doesn't make much sense. I'll try another ROM.
It should also be noted I tried rooting stock 4.3 but it really didn't like that at all.
Sent from my SGH-I747 using xda app-developers app
audit13 said:
Try flashing a another ROM such a Validus or CM11 as ROMs are pre-rooted.
Also, I prefer Philz Touch over TWRP. Maybe the recovery program makes a difference?
Click to expand...
Click to collapse
On validus now...same thing
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Weird that you don't have root. I have Validus and apps like root explorer ask for root access which I can grant.
Maybe the 4.3 bootloader is causing a problem?
audit13 said:
Weird that you don't have root. I have Validus and apps like root explorer ask for root access which I can grant.
Maybe the 4.3 bootloader is causing a problem?
Click to expand...
Click to collapse
Yeah, this whole thing is weird. I had the 4.3 bootloader (rooted at end of Dec 2013) and didn't have an issue. I went to Quantum ROM FWIW. Have you tried a full wipe (system, cache, dalvik, data) with a clean flash of the ROM?
Tell me if any of this is wrong:
Right now root will trip knox and can only be done on 4.3 or below?
The kitkat update prevents root and is currently unavailable in the US.
CWM & TRWP is available for this tablet.
Flashing this tablet is very similar to flash a SG3. ( Not something I've heard about just trying to compare)
Flashing any rom other than a version of the official Samsung rom will result in the lost functionality of the S Pen
Icon000 said:
Tell me if any of this is wrong:
Right now root will trip knox and can only be done on 4.3 or below?
The kitkat update prevents root and is currently unavailable in the US.
CWM & TRWP is available for this tablet.
Flashing this tablet is very similar to flash a SG3. ( Not something I've heard about just trying to compare)
Flashing any rom other than a version of the official Samsung rom will result in the lost functionality of the S Pen
Click to expand...
Click to collapse
1. Root will trip knox regardless your version whether it is 4.4 or 4.3.
2. Kitkat is now available for US. http://www.sammobile.com/firmwares/1/?model=SM-P600&pcode=XAR#firmware
3. Yes
4. yes
5. Just if you flash an AOSP or AOKP rom, which is not available till now, other than that any custom rom available now will give you all spen functionality.
2. KitKat is rootable as well. Flash CF-Autoroot, Custom Recovery and then flash SuperSU.zip with recovery.
clouds5 said:
2. KitKat is rootable as well. Flash CF-Autoroot, Custom Recovery and then flash SuperSU.zip with recovery.
Click to expand...
Click to collapse
I've been seeing people go back and forth. Are you rooted on +4.4?
I don't want to just assume any rom other than AOSP or AOKP will have it. I tried looking around at the limited roms that are available and none seem to mention if they do or do not offer S Pen functionality. Do you know of a specific kitkat rom that does?
lsherif said:
1. Root will trip knox regardless your version whether it is 4.4 or 4.3.
2. Kitkat is now available for US. http://www.sammobile.com/firmwares/1/?model=SM-P600&pcode=XAR#firmware
3. Yes
4. yes
5. Just if you flash an AOSP or AOKP rom, which is not available till now, other than that any custom rom available now will give you all spen functionality.
Click to expand...
Click to collapse
Icon000 said:
I've been seeing people go back and forth. Are you rooted on +4.4?
Click to expand...
Click to collapse
I am rooted in 4.4.2.
I just cf auto-rooted, restart. Update supersu from playstore. Run supersu. And I was done.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Icon000 said:
I've been seeing people go back and forth. Are you rooted on +4.4?
Click to expand...
Click to collapse
Yes. The only thing that is different from 4.3 is that you have to update your SuperSu app by flashing it through custom recovery or update it through play store.
Icon000 said:
I don't want to just assume any rom other than AOSP or AOKP will have it. I tried looking around at the limited roms that are available and none seem to mention if they do or do not offer S Pen functionality. Do you know of a specific kitkat rom that does?
Click to expand...
Click to collapse
Do not assume, read the ROM description. Any ROM based on Samsung firmware has S pen, multiwindow. There are at least 2 such ROMs in development section.
FYI The Verizon version isn't rootable... AFAIK
Sent from my SM-P605V using Tapatalk
so i have a rooted at&T galaxy s3 on the latest stock firmware which i guess is 4.3. i tried flashing resurrection rom which was kit kat and it failed. so i restored my back up and the phone would get stuck on the splash screen. so i formated the whole phone and forgot to save my backup to my sdcard. twrp now says that i have no OS installed and also says i am not rooted anymore. im scared and need a little assistance. i just want to get it going.
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
audit13 said:
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
Click to expand...
Click to collapse
i bought a micro sc card reader and transfered a superuser zip and an old 4.3 beanstalk rom. it flashed fine last night. i used my phone all day and downloaded the latest 4.3 beanstalk rom and just tried to flash it and it FAILED. This is the second time i had a flash fail. I tried flashing that old beanstalk rom again and it failed too! what the heck???? my battery is a little low.....does twrp have some kind of safety built in where it wont flash if bettery is low?
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
scorey03 said:
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
Click to expand...
Click to collapse
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
audit13 said:
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
Click to expand...
Click to collapse
no its not based on kitkat. i flashed an older version of cwm via odin. i figured i could just update it with rom manager. i tried to update cwm to the latest verion and it fails everytime. so...i downloaded root checker from the play store and it says im not rooted. i need to fix this lol
im running a custom rom but yet root checker says its not rooted...hmm
Flash the latest Philz and. Validus as I know that is a rooted ROM. Personally, I don't use ROM manager.
scorey03 said:
im running a custom rom but yet root checker says its not rooted...hmm
Click to expand...
Click to collapse
What custom Rom is this?
Sent from my HTC One using Tapatalk
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
So I guess my question now is.....how do I get back to stock rooted? Im on slimbean 4.3 without root access.
scorey03 said:
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
Click to expand...
Click to collapse
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
audit13 said:
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
Click to expand...
Click to collapse
I tried and it failed......
scorey03 said:
I tried and it failed......
Click to expand...
Click to collapse
What rom and which recovery did you try?
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
scorey03 said:
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Click to expand...
Click to collapse
There is no stock ATT 4.3 ROM because ATT only released 4.3 as an OTA update. Do not flash any 4.3 firmware (even from sammmobile.com) unless it has been compiled for installation via Odin. Check the development threads for firmware that can be flashed via Odin.
crazymonkey05 said:
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
ok. im going to flash I747UCUEMJ2.7z which came from that link/thread you posted via odin.
If you got the phone on 4.3 you need to flash mjb or else you will brick the device
Sent from my ATT Samsung Galaxy SIII using TapaTalk