Develop Bugs

Galaxy gio problem

Hi guys
I do not know what made ​​the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:

putpuda said:
Hi guys
I do not know what made ​​the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
Click to expand...
Click to collapse
U hardbricked it. U'll have to take it to service centre and tell them a lie tht u upgraded with kies and this happen. dont mention about root,custom rom nothing which makes ur warranty invaild

Does anyone have a better solution?

MTV Jig is Here!!! And I haz questions...

Got my MTV jig today...I'm charging the battery to my bricked SG3 at the moment in an external charger to make sure it has enough juice to get the job done. The MTV site said this jig will work on ALL SG's 2 and 3 so I guess this will be the ultimate test since I'm reading different things everywhere. Now for my question(s), am I supposed to be able to just plug the jig in, do the key combo for download mode and then the magic happens immediately? I also need to get a stock rom, not the one with root injected because I was reading the instructions on how to install the root injected rom and it says Odin needs to do the install for it. I dont see how that'll happen in my phone's current state (hard bricked). Say the jig works and download mode pops up, will it continue popping up on its own like if I were to plug into the pc? Sorry, just slightly confused

If you're hard bricked a jig won't work for that. You would need to get a JTAG service to fix a hard brick. But. If its not hard bricked then all you need to do is plug the jig in and your device will automatically go into download mode. Then from there you can use odin to flash a stock ROM and you'll be up and running again.

task650 said:
If you're hard bricked a jig won't work for that. You would need to get a JTAG service to fix a hard brick. But. If its not hard bricked then all you need to do is plug the jig in and your device will automatically go into download mode. Then from there you can use odin to flash a stock ROM and you'll be up and running again.
Click to expand...
Click to collapse
...please tell me you're joking....
I thought the jig was to bypass whatever is causing the phone not to boot allowing you to at least get into download mode or recovery....I have a feeling I'm gonna puke now. It's definitely hard bricked. I accidentally loaded an i9300 rom on my i747...completely dead to the world.

Momomuffins said:
...please tell me you're joking....
I thought the jig was to bypass whatever is causing the phone not to boot allowing you to at least get into download mode or recovery....I have a feeling I'm gonna puke now. It's definitely hard bricked. I accidentally loaded an i9300 rom on my i747...completely dead to the world.
Click to expand...
Click to collapse
A jig is only useful for a soft brick as task has said, hard brick needs a jtag repair.
Sent from my SAMSUNG-SGH-I747 using xda premium

To use the jig, just plug it in. No key combo needed

Well my phone is definitely hard bricked...AT&T won't exchange my phone because I transferred tmy service to another carrier a month ago...the other carrier is run by a bunch of asshats giving me the run around...SO...I'm gonna try a Samsung warranty exchange. I can't afford a JTAG right now since I'm not working...FML.../end

Help !!!! Bricked SGS-T989

Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.

wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance

wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)

Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?

HELP Note II stuck on splash screen

Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help

classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit

Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help

No one can help

sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back

sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation

Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2

Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me

Samsung Galaxy J2 prime Deadboot

Hello, this is a newbie mistake which is kind of funny because I've been doing phone repair for quite a while. I flash my Samsung phone but it failed so instead of restarting it from dl mode I removed the battery and after that mistake the phone now is dead. It won't even charge or boot to dl mode even though I used JIG. I find out while searching that you can use JTAG but it's so expensive on my end. Can you guys suggest any other tool or anyone of you can help me fix it?

YRARG said:
Hello, this is a newbie mistake which is kind of funny because I've been doing phone repair for quite a while. I flash my Samsung phone but it failed so instead of restarting it from dl mode I removed the battery and after that mistake the phone now is dead. It won't even charge or boot to dl mode even though I used JIG. I find out while searching that you can use JTAG but it's so expensive on my end. Can you guys suggest any other tool or anyone of you can help me fix it?
Click to expand...
Click to collapse
If you're at the point where you would have to use JTAG to repair a device, you're better off giving up and getting a new one. Getting the binary images you'd need is next to impossible.