Hi guys
I do not know what made the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
putpuda said:
Hi guys
I do not know what made the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
Click to expand...
Click to collapse
U hardbricked it. U'll have to take it to service centre and tell them a lie tht u upgraded with kies and this happen. dont mention about root,custom rom nothing which makes ur warranty invaild
Does anyone have a better solution?
Related
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
whats about ur batt charge....... Plz charge yr batt using any multi charger and try to enter DL mode........ May be its low batt problem ....
Sent from my GT-S6102 using xda premium
close this,there too many posts and threats like this
sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
Bro if you have flashed the bootloader of S5300 then I'm afraid you are pretty and royally screwed! How can you make a mistake like that?
As far as I know, the only way you can fix it is to send it into Samsung service centre.
Sorry to break it to you bro.
Next time make sure you know what you are doing before playing around with firmwares, they are NOT COMPATIBLE!
sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out
leodasal2 said:
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out
Click to expand...
Click to collapse
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81
manoranjan2050 said:
whats about ur batt charge....... Plz charge yr batt using any multi charger and try to enter DL mode........ May be its low batt problem ....
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
i tried after recharging my battery. still nothing shows up. & if i leave the battery attached to my android phone after some time my phone heats even if its not working.
leodasal2 said:
are you sure you can't enter into download mode?? (volume down + home button + lock button)
if yes, then it's indeed hard brick bro
the only thing that you can do is send it back to the service center and make an excuse that your updating through kies was interrupted by a power black out
Click to expand...
Click to collapse
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked
alkesh95 said:
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81
Click to expand...
Click to collapse
soft brick and hard brick are two different things..
boot loops and stuck at samsung screen are only soft bricks
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
sunamit37 said:
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked
Click to expand...
Click to collapse
on the physical aspect, no
they can only figure that out if they can manage to boot it up without flashing the original firmware which i think cannot be avoided so base on that theory, they will not find out
ps: just tell them the excuse i gave on the previous comment
make sure your warranty isn't expired!!
alkesh95 said:
Buddy i always do that I got it unbricked 6 times since February
And once it got stuck at bootloops while installing creeds rom wid nexus boot animation
They said that software in phone is not from Samsung
Then I told them that I was updating it via fota and they agreed
Sorry for my good english
Check this out
http://forum.xda-developers.com/showthread.php?t=81
Click to expand...
Click to collapse
will the officials in service centre be able to figure out what i have done & which rom i have flashed in my phone and got the phone bricked. & what excuse is suitable for this situation as my phone is still in warranty
leodasal2 said:
soft brick and hard brick are two different things..
boot loops and stuck at samsung screen are only soft bricks
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
on the physical aspect, no
they can only figure that out if they can manage to boot it up without flashing the original firmware
ps: just tell them the excuse i gave on the previous comment
make sure your warranty isn't expired!!
Click to expand...
Click to collapse
what do u mean by "make sure your warranty isn't expired!!" pls tell me ?
sunamit37 said:
what do u mean by "make sure your warranty isn't expired!!" pls tell me ?
Click to expand...
Click to collapse
check your warranty sticker!
example: my phone has this sticker inside it noting that it is an original Samsung product with a 1-year warranty (from date of purchase)
you can also check the box
sunamit37 said:
by mistake i downloaded the rom of S5300 and flashed it on my s5360 . and have bricked the phone . when i press the power button nothing shows up. i have tried all the steps , all combinations of keys. my phone does not enter either recovery nor download mode. in short it does not boot . Pls help me
Click to expand...
Click to collapse
if your phone was hard bricked, then the combination keys will not work anymore. .you can use "usb jig" to trigger your phone into odin mode. .you can buy a usb jig or a home made usb jig. .you will only need a 300k resistor and a micro usb. .search for a tutorial on "how to make your own usb jig"
that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.
kurotsugi said:
that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.
Click to expand...
Click to collapse
oopppssss. .sorry my bad. .i thought usb jig will work. .but you're more experienced than me (because i'm just a noob) so sunamit37 must consider your advice than mine. .thanks
kurotsugi said:
that will definetely a hard brick. you've flashed wrong bootloader in your phone. in these case only samsung service center could revive your phone. you can ignore all comment and post about jig, recovery mode, combination keys, odin, bla bla bla since they won't work. save your time and just send your phone to samsung service center.
Click to expand...
Click to collapse
what reason should i give in the service centre as my phone is in warranty period
@missingchord: I'm sorry if my post migh offend you. I didn't mean that. you're just suggesting something based on your knowledge anyway. aside OP, there's only one person here who have got hard brick on his SGY. its normal if only a few us here know how to fix a hard bricked device.
@sunamit: just say 'something goes wrong when I update my rom'. thats not a lie and not void your warranty. most service center will accept these reason.
missingchord said:
if your phone was hard bricked, then the combination keys will not work anymore. .you can use "usb jig" to trigger your phone into odin mode. .you can buy a usb jig or a home made usb jig. .you will only need a 300k resistor and a micro usb. .search for a tutorial on "how to make your own usb jig"
Click to expand...
Click to collapse
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
http://www.youtube.com/watch?v=xu3SchQ6zvM
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me
sunamit37 said:
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me
Click to expand...
Click to collapse
if the SII jig will not cost u too much .... there is nothing bad in giving it a try, afterall ur SGY is already hard bricked .. what worse can happen ....
give it a try if it is not a mess .
sunamit37 said:
is there a readymade jig for s5360. if not can i use the jig of galaxy sII . will the method used to make the usb jig in the following video , work for my s5360
http://www.youtube.com/watch?v=xu3SchQ6zvM
in the video i dont see any resistors just a paper, pencil graphite rubbed on it to offer resistance. will it work or not . Please tell me
Click to expand...
Click to collapse
will this model of jig work on s5360 - SAMSUNG I9100 GALAXY S2 DOWNLOAD MODE USB JIG S DONGLE RESET COUNTER II
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)
Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
riki126 said:
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
Click to expand...
Click to collapse
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Yeah i agree, thanks
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
JustinNL said:
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
Click to expand...
Click to collapse
shayneflashindaily said:
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Click to expand...
Click to collapse
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
riki126 said:
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
Click to expand...
Click to collapse
Sometimes if you try to charge the phone for a really long time (say 12 to 18 hrs at stretch) - the phone starts to turn on. Try that. and see if you can boot into download mode.
Also, when you give it to LG ... tell them that it is not turning on, thats it...
ok, i tried charging it but nothing happened so ill send it to them and just say that it wont turn on. Thanks!
Once they get it booted up and see the custom kernel and Rom they are most likely going to charge you full price for another phone and of course will not honor any warrantee. As long as you're ok with that go ahead and sent it back for a replacement. with that bein said, it's probably best you tell them the truth so you get accurate info from them ahead of time.
riki126 said:
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Click to expand...
Click to collapse
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
TheMighyLoki said:
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
Click to expand...
Click to collapse
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
riki126 said:
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
Click to expand...
Click to collapse
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
TheMighyLoki said:
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
Click to expand...
Click to collapse
No harm done haha. ill talk to LG and see what they can do for me. Thanks
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
GZ0ne05 said:
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
Click to expand...
Click to collapse
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
erljayp said:
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
Click to expand...
Click to collapse
So now I really am screwed. Can you tell me how to fix the USB port, and if it damages the phone in any way?
JIG
Maybe you should try USB JIG http://usbjig.com/
How do you charge your battery?
There must be some way to use your SD card to flash something from it.
Verny if his USB is not working then how he could use the jig.
Sent from my GT-N7100
Oh, sorry, my english isn´t very well... My mistake
Here you go my friend, shouldn't be hard or expensive to find a replacement board.
http://www.ifixit.com/Guide/Samsung+Galaxy+Note+II+USB+Board+Replacement/16413
Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help
classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit
Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help
No one can help
sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me