Related
Got my MTV jig today...I'm charging the battery to my bricked SG3 at the moment in an external charger to make sure it has enough juice to get the job done. The MTV site said this jig will work on ALL SG's 2 and 3 so I guess this will be the ultimate test since I'm reading different things everywhere. Now for my question(s), am I supposed to be able to just plug the jig in, do the key combo for download mode and then the magic happens immediately? I also need to get a stock rom, not the one with root injected because I was reading the instructions on how to install the root injected rom and it says Odin needs to do the install for it. I dont see how that'll happen in my phone's current state (hard bricked). Say the jig works and download mode pops up, will it continue popping up on its own like if I were to plug into the pc? Sorry, just slightly confused
If you're hard bricked a jig won't work for that. You would need to get a JTAG service to fix a hard brick. But. If its not hard bricked then all you need to do is plug the jig in and your device will automatically go into download mode. Then from there you can use odin to flash a stock ROM and you'll be up and running again.
task650 said:
If you're hard bricked a jig won't work for that. You would need to get a JTAG service to fix a hard brick. But. If its not hard bricked then all you need to do is plug the jig in and your device will automatically go into download mode. Then from there you can use odin to flash a stock ROM and you'll be up and running again.
Click to expand...
Click to collapse
...please tell me you're joking....
I thought the jig was to bypass whatever is causing the phone not to boot allowing you to at least get into download mode or recovery....I have a feeling I'm gonna puke now. It's definitely hard bricked. I accidentally loaded an i9300 rom on my i747...completely dead to the world.
Momomuffins said:
...please tell me you're joking....
I thought the jig was to bypass whatever is causing the phone not to boot allowing you to at least get into download mode or recovery....I have a feeling I'm gonna puke now. It's definitely hard bricked. I accidentally loaded an i9300 rom on my i747...completely dead to the world.
Click to expand...
Click to collapse
A jig is only useful for a soft brick as task has said, hard brick needs a jtag repair.
Sent from my SAMSUNG-SGH-I747 using xda premium
To use the jig, just plug it in. No key combo needed
Well my phone is definitely hard bricked...AT&T won't exchange my phone because I transferred tmy service to another carrier a month ago...the other carrier is run by a bunch of asshats giving me the run around...SO...I'm gonna try a Samsung warranty exchange. I can't afford a JTAG right now since I'm not working...FML.../end
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?
sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though
I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
riki126 said:
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
Click to expand...
Click to collapse
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Yeah i agree, thanks
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
JustinNL said:
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
Click to expand...
Click to collapse
shayneflashindaily said:
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Click to expand...
Click to collapse
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
riki126 said:
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
Click to expand...
Click to collapse
Sometimes if you try to charge the phone for a really long time (say 12 to 18 hrs at stretch) - the phone starts to turn on. Try that. and see if you can boot into download mode.
Also, when you give it to LG ... tell them that it is not turning on, thats it...
ok, i tried charging it but nothing happened so ill send it to them and just say that it wont turn on. Thanks!
Once they get it booted up and see the custom kernel and Rom they are most likely going to charge you full price for another phone and of course will not honor any warrantee. As long as you're ok with that go ahead and sent it back for a replacement. with that bein said, it's probably best you tell them the truth so you get accurate info from them ahead of time.
riki126 said:
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Click to expand...
Click to collapse
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
TheMighyLoki said:
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
Click to expand...
Click to collapse
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
riki126 said:
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
Click to expand...
Click to collapse
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
TheMighyLoki said:
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
Click to expand...
Click to collapse
No harm done haha. ill talk to LG and see what they can do for me. Thanks
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
GZ0ne05 said:
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
Click to expand...
Click to collapse
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
erljayp said:
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
Click to expand...
Click to collapse
So now I really am screwed. Can you tell me how to fix the USB port, and if it damages the phone in any way?
JIG
Maybe you should try USB JIG http://usbjig.com/
How do you charge your battery?
There must be some way to use your SD card to flash something from it.
Verny if his USB is not working then how he could use the jig.
Sent from my GT-N7100
Oh, sorry, my english isn´t very well... My mistake
Here you go my friend, shouldn't be hard or expensive to find a replacement board.
http://www.ifixit.com/Guide/Samsung+Galaxy+Note+II+USB+Board+Replacement/16413