Related
So my phone rooted on my old XP computer that I no longer have. My SD card got corrupted and I cannot access it through my phone or my new computer anymore. It obviously has all my backups.
My comp will recognize the phone connected but fails on installing all the drivers.
What is the best way for me to get back to a good starting point that I could back up to my computer
Sent from my PC36100 using XDA App
Get a new sd card and do the back up from recovery.
Not sure what you are asking here. If your back up is in the sd card then it's lost. I don't know what it has to do with the new PC. Afaik you cannot do a back up directly to a pc.
Look in the Wiki under development. There are several guides on how to install the right drivers for the right system.
whatsitsnamenow said:
Get a new sd card and do the back up from recovery.
Not sure what you are asking here. If your back up is in the sd card then it's lost. I don't know what it has to do with the new PC. Afaik you cannot do a back up directly to a pc.
Click to expand...
Click to collapse
basically I want to what is a good stock or sense rom that i should flash and keep as a safe backup. I want to be a able to keep a good sense based rom that I can keep on my computer to prevent this from happening again
You can use the Rom that is in your phone now. Just do a factory reset under menu settings sd card if you want a clean back up with no clutter.
My favorite sense Rom is "SprintLovers" http://forum.xda-developers.com/showthread.php?t=830153. By far the most stable Rom I have tried.
I do a nandroid and then sync that folder to my Dropbox account. You can sync Titanium Backup to Dropbox as well
http://db.tt/Ed0e0qM go there to setup an account if you don't have one. You'll get some extra space by using that link
whatsitsnamenow said:
You can use the Rom that is in your phone now. Just do a factory reset under menu settings sd card if you want a clean back up with no clutter.
My favorite sense Rom is "SprintLovers" http://forum.xda-developers.com/showthread.php?t=830153. By far the most stable Rom I have tried.
Click to expand...
Click to collapse
Well I am running cm7 because it was on my phone at the time of the sd card screwing up.
Another reason why I want to have a good fresh start is because all of my wimax/radios/ and stuff are all basically out of wack. Thanks guys
Hey all! So, a couple weeks back, I flashed a BETA ICS ROM onto my Inspire (Desire HD). Being my normal ignorant, and noob-like self, I completely ignored the fact that the thread said "DEVS ONLY!"
Well, flash forward a couple of weeks, and my Inspire is all but bricked. The ROM did not have mobile data yet, did not have a connection to the micro-SD card, and it was not touchscreen ready yet. I have tried ADB, but to no-avail, my file system knowledge and overall lack of knowledge put me quite a predicament.
I have flashed many ROMs before, but I sincerely messed up big time on this try. So, would any of you be able to help me find a cure for this important issue? Is the fix really simple and easy, and I am just a bonehead?
Thanks!
Not sure what your issue is. You never clearly stated. Does the phone not boot? Stuck in the splash screen? you want to flash a new rom?
marsdta said:
Not sure what your issue is. You never clearly stated. Does the phone not boot? Stuck in the splash screen? you want to flash a new rom?
Click to expand...
Click to collapse
Oops, sorry! My problem is that my phone is stuck on the developer ROM, and I would like to fix it somehow. So, yes, I would like to get another ROM, but I have to remove this one first. The phone itself works great, but with no wi-fi, mobile data, and no touchscreen support, it is hard to live with.
Your nowhere near bricked. Going to ask the basics. Did you make a backup before hand? Did you have another rom on your SD card.?
If you answered yes to either then simply boot into recovery and flash the rom/ backup. You mentioned flashing roms before so I left out the steps.
If you answered no then you have two options. You can mount the SD card from within cwr. So download a rom on your PC. Mount the sd card, then flash away. Or take out SD card and use an adapter/other phone to transfer a new rom.
I was not smart enough to back up onto a computer, but I did back up onto the SD card. The only problem with this is that the ROM, and my computer, will not recognize that there is in fact an SD card inserted into the phone. So, in other words, it's like not having an SD card at all.
CWR will still read the sd card. Trust me. boot into CWR and restore your backup. And you be good as gold
Thanks! But, what exactly does CWR stand for? Haha, I'm not the most knowledgeable on the topic of Android, but is it like Clock Work Mod?
iTookTheByte said:
Thanks! But, what exactly does CWR stand for? Haha, I'm not the most knowledgeable on the topic of Android, but is it like Clock Work Mod?
Click to expand...
Click to collapse
yeah. CWR stands clockworkmod recovery
Okay, in that case, I'm not sure. All of my old files (CM7, CWM, etc.) were on the SD card, and it is unreachable. I have tried to boot into CWR, but it just gives me a black screen. I feel like this thing is just unable to be fixed!
its fixable. just the black screen in CWR is an obstacle. worst case is you have flash an ruu and start over with the whole rooting. i remember reading about the black screen in CWR give me a few minutes to find them to see what to do next
Okay! Thanks a bunch!
Pull the battery and put back in
Press and hold vol-down
Press power and bootloader will start
Select recovery using vol keys and press power
If you have a backup (you really should, and and if you don't consider this experience a learning one), restore it by selecting the backup / restore option
If no backup, goto mounts and select as storage, plug usb into pc and copy your favorite Rom over, then select back and flash from zip, select the zip and you should all be back up
But please, please I'm all for people learning and experimenting, but might be worth reading some of the basics guides and notes on roms before flashing the next one. Oh, and if I forgot to mention.... Do a backup before flashing ANYTHING saves heartache later, the enjoy
Sent from my HTC Desire HD using XDA App
THANK YOU! I remember this now! Thanks everyone
Your welcome, after all, we all have to learn sometime
Sent from my HTC Desire HD using XDA App
ok i couldn't find the specific thread i was looking for. i remember it being stickied but couldnt find it. did find something that might be usefull but it depends on if you have access to an sd card adapter or other phone to transfer the file needed to reflash CWR. If not i would suggest trying to see if flashing an ruu to help.
edit- I'm confused now. thought you said that when you boot into recovery all you get is a black screen?
Hi, its my first time posting, I figured I wanted to sign up to XDA eventually so why not when I feel like I've completely ruined my phone... or at least internal sd card...
Basically I rooted my phone and was flashing the Jellybam rom, and everything was going smoothly until I got to the bootloader and my phone started bootlooping. My first thought was 'Oh but I have a backup'. So I went to my backup in CWM and to my dismay I got an error saying "No files were found."
I could clearly see my files from exploring around on my sd card however they were now in a file called '0' and CWM could not read them from there. Without a working ROM I started to panic. However I had a zip of CM10 still on my internal sd card so I flashed that and (luckily) it worked.
Not really being too competent with flashing new ROMs yet I was quite happy that I had anything. So I used titanium backup to reinstall my old apps and data. However once they were installed I now get an error with 'the process android.process.media has stopped'.
I'm guessing this has do do with the fact that I have all my files still on the '0' folder. All the other folders from the '0' folder were the same except they were all empty, soooooo I decided to delete them. At this point I'm guessing that was a really bad idea because my initial plan of moving all the files from '0' to my pc then back to my phone, I did not think about the fact that I would be moving 14 Gb of data...
So basically now I'm hoping if someone knows a way to revert my phone to 4.1.2 by somehow moving all the files from '0' back onto the internal storage (basically getting rid of this '0') folder. The CM10 ROM is a 4.1.2 ROM so its not like I'm fudging up my phone further (I hope).
If you could be as detailed as possible as to what to do that would be great, because I'm really really new to this....
From what I've read I've heard a couple of suggestions:
1. updating the recovery.img of CWM will work? How exactly do I do this?
2. opening abd shell recovery and moving the files like that (however I deleted all the other files in the internal storage apart from '0' because that was where all the data was stored and everything else was empty...'
help. :crying:
0Capita said:
Hi, its my first time posting, I figured I wanted to sign up to XDA eventually so why not when I feel like I've completely ruined my phone... or at least internal sd card...
Basically I rooted my phone and was flashing the Jellybam rom, and everything was going smoothly until I got to the bootloader and my phone started bootlooping. My first thought was 'Oh but I have a backup'. So I went to my backup in CWM and to my dismay I got an error saying "No files were found."
I could clearly see my files from exploring around on my sd card however they were now in a file called '0' and CWM could not read them from there. Without a working ROM I started to panic. However I had a zip of CM10 still on my internal sd card so I flashed that and (luckily) it worked.
Not really being too competent with flashing new ROMs yet I was quite happy that I had anything. So I used titanium backup to reinstall my old apps and data. However once they were installed I now get an error with 'the process android.process.media has stopped'.
I'm guessing this has do do with the fact that I have all my files still on the '0' folder. All the other folders from the '0' folder were the same except they were all empty, soooooo I decided to delete them. At this point I'm guessing that was a really bad idea because my initial plan of moving all the files from '0' to my pc then back to my phone, I did not think about the fact that I would be moving 14 Gb of data...
So basically now I'm hoping if someone knows a way to revert my phone to 4.1.2 by somehow moving all the files from '0' back onto the internal storage (basically getting rid of this '0') folder. The CM10 ROM is a 4.1.2 ROM so its not like I'm fudging up my phone further (I hope).
If you could be as detailed as possible as to what to do that would be great, because I'm really really new to this....
From what I've read I've heard a couple of suggestions:
1. updating the recovery.img of CWM will work? How exactly do I do this?
2. opening abd shell recovery and moving the files like that (however I deleted all the other files in the internal storage apart from '0' because that was where all the data was stored and everything else was empty...'
help. :crying:
Click to expand...
Click to collapse
1- Your solution
2- Was quite the bad idea to delete it all so this solution won't work now.
clockwordmod.com is where you'll find the latest recovery.
BWolf56 said:
1- Your solution
2- Was quite the bad idea to delete it all so this solution won't work now.
clockwordmod.com is where you'll find the latest recovery.
Click to expand...
Click to collapse
So how exactly do I do that? I just download the the latest clockwork mod and flash it? Why can't it be updated via an automatic updater? And what will it do to the file or will it change clockwork mod so that it will scan the entire sd card?
Also if I just remade folders identical to the ones I deleted, will that still work?
I'm just trying to get my phone to be as functional as it was before this all started.
Thanks for replying btw!
0Capita said:
So how exactly do I do that? I just download the the latest clockwork mod and flash it? Why can't it be updated via an automatic updater? And what will it do to the file or will it change clockwork mod so that it will scan the entire sd card?
Also if I just remade folders identical to the ones I deleted, will that still work?
I'm just trying to get my phone to be as functional as it was before this all started.
Thanks for replying btw!
Click to expand...
Click to collapse
That's a lot of question for the simple fix I gave you.. I haven't used cwm in a while so Idk what changed in the update but if people said it fixed it, then it did..
0, 1, 2, etc.. Is something that came with JB, it's for the different users. Not much can be done about it.
About how you should do that: Go on their website, FOLLOW their instructions to a T, Enjoy.
As for why it can be updated via an automatic updater.. Well I'm not the person you should ask.
B said:
Wolf56;371questions it's a lot of question for the simple fix I gave you.. I haven't used cwm in a while so Idk what changed in the update but if people said it fixed it, then it did..
0, 1, 2, etc.. Is something that came with JB, it's for the different users. Not much can be done about it.
About how you should do that: Go on their website, FOLLOW their instructions to a T, Enjoy.
As for why it can be updated via an automatic updater.. Well I'm not the person you should ask.
Click to expand...
Click to collapse
Sorry for all the questions, I'm just worried that I messed up my phone. Would you know if I were able to be able to access my old clockwork mod backups and used one of them, would it put my 0 files back into the internal storage like they used to? Or would it only revert the settings and I would still be SOL.
0Capita said:
Sorry for all the questions, I'm just worried that I messed up my phone. Would you know if I were able to be able to access my old clockwork mod backups and used one of them, would it put my 0 files back into the internal storage like they used to? Or would it only revert the settings and I would still be SOL.
Click to expand...
Click to collapse
Yes, that's the whole point of the cwm update. Now to flash it!
Or, go digg through the cm nightly thread. They had a flash able zip that would restore your internal sd after downgrading Android versions.
BWolf56 said:
Yes, that's the whole point of the cwm update. Now to flash it!
Click to expand...
Click to collapse
Well here's my latest problem... I tried to update CWM with an .img however when I tried to run it in the terminal it said there was not enough space... I don't know what to do... there is definitely a couple gigs free so I don't know what is wrong...
mrhaley30705 said:
Or, go digg through the cm nightly thread. They had a flash able zip that would restore your internal sd after downgrading Android versions.
Click to expand...
Click to collapse
the cm nightly thread? So theres a zip that would make 4.2 go back to 4.1?
Okay update:
I managed to flash update the new version of CWM... still can't use backup... I get a /system fail
It doesn't downgrade you're ROM. It fixes the 0 folder issue
mrhaley30705 said:
It doesn't downgrade you're ROM. It fixes the 0 folder issue
Click to expand...
Click to collapse
Ugh Okay I've given up... I dont know what else to try. Now that I've updated my CWM I cant flash the old CM10 because it reads it as a 4.1 and uncompatable... FML.
Can anyone point me to where I can find the Odin stock factory? I guess I'll just start from scratch...
http://db.tt/rWFbAFiF
Link to restore files from /0 directory
Credits go to madmack
Sent from my SGH-I747 using xda app-developers app
Helloworld294 said:
http://db.tt/rWFbAFiF
Link to restore files from /0 directory
Credits go to madmack
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
OOOMMMMMGggg ahhhhhh, that would have been so helpful but I've already started to factory reset it. Thanks though!
ahhhhhhhhh
Forget cwm it sucks use twrp and be done with all the problems
Sent from the scary door....
Okay, this is a total Noob question and sorry for my own lack of knowledge.... Hope to just get what I need and then go for the gold.
I bought this HTC Evo 4G as a jailbroken and rooted unit and have been running it on the Boost Mobile network for over a year now. I'm having major problems with battery life, updates, etc, etc... And, want to Flash the ROM and wipe this sucker clean and start over with the latest and greatest version of Android OS.
I've picked a ROM off this site from a developer I want to try out. If I don't like it, I'll try another!
I have a hosted exchange service so can easily re-import all my contacts and numbers, and I've backed up my mission critical apps with Titanium backup. I know the data will get wiped, and I really want to wipe everything and start over. HOWEVER, I want to make sure the memory settings of my network plan with my phone number and provisions to use it on the Boost network remain.
I have a few friends who flash all the time, and so I'm guessing all these will remain, but I want to make sure and I'm also not sure how.
Any brief explanation or if someone can point me to where I can easily get this info, that would be great!!!
Somone on here mentioned an introductory video for first time ROM flash?? Any info helpful.
Everyone says it's a little scary the first time, which keeps most people from ever tweaking their ROM, but that once you get over the "fear factor" it's really not a big deal.
Hipkat has a pretty good guide that should answer most of your questions regarding ROM flashing. Find it in the link below. As far as your settings go, flashing a new ROM won't affect the settings you have for it to be flashed to a different carrier.
http://forum.xda-developers.com/showthread.php?t=1386911
For videos, here you go.
https://www.youtube.com/watch?v=aLS6MYJ7p0g&feature=youtube_gdata_player
You should also make a backup in recovery prior to flashing just in case things go sideways and you need to revert to it. Make sure your battery is at least halfway charged, too.
Sent from my EVO using xda premium
FinZ28 said:
You should also make a backup in recovery prior to flashing just in case things go sideways and you need to revert to it. Make sure your battery is at least halfway charged, too.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks for posting... This was all very informative and watched a few other YouTube videos. Here's where I'm at... Still trying to figure out how to get Amon MOD Recovery. Could not find it in the Android Marketplace, so maybe I just have to download to my desktop and move it over to to the SD card manually. I'll do this later tonight.
I need to make a Nandroid backup of my current settings (which it looks like I can do in Amon Ra?)
And, is my MSL (Master Subsidy Lock code) necessary to have?? I tried obtaining it through Android Terminal command and the GetMyMSL app, and neither one worked! The code came back as 00000 when using GetMyMSL.
I bought this phone well over a year ago and it was jailbroken and rooted already by the Ebay seller for use on the Boost Mobile network as it was a Sprint exclusive phone, so maybe this has been bypassed?
Search for Smelkus recovery here on XDA. Follow the instructions listed to install it on your phone.
Your MSL isn't necessary for basic rooting & flashing purposes.
Sent from my EVO using xda premium
FinZ28 said:
Search for Smelkus recovery here on XDA. Follow the instructions listed to install it on your phone.
Your MSL isn't necessary for basic rooting & flashing purposes.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks for the info.
Okay, I downloaded Amon Recovery and put it on the SD card, followed the excellent instructions linked above and created a Nandroid backup. I just selected the top three options, (Boot, System and Data) and left cache, sd-ext, and recovery blank and created the backup file. I moved the file to my PC just in case it wiped it off my SD card as an extra measure of safety.
I really don't think I'll need it anymore, but again, just in case all hell brakes loose.
My main question is that I have the new ROM file on my computer desktop... Should I move it to the SD card prior to clearing it out?
One more question is what is the HBoot and is there a newer version I should be using?
I did already install AmonRa so not sure if this is really necessary if I have that.
Also, since this is the first time going to a custom Non-Sense ROM, It was explained that I should partition the SD card. I decided to back up everything to my laptop, so I can manually add it back on the SD card later, but I wonder if this complicates things.
GARover said:
One more question is what is the HBoot and is there a newer version I should be using?
I did already install AmonRa so not sure if this is really necessary if I have that.
Also, since this is the first time going to a custom Non-Sense ROM, It was explained that I should partition the SD card. I decided to back up everything to my laptop, so I can manually add it back on the SD card later, but I wonder if this complicates things.
Click to expand...
Click to collapse
The newest Hboot is 2.18. If your Hboot is older, there is no need to update. As far as partitioning your SD card, it can be done through recovery, but the process will wipe the card clean, which is why it's recommended to backup everything to your computer.
Sent from my EVO using xda premium
FinZ28 said:
The newest Hboot is 2.18. If your Hboot is older, there is no need to update. As far as partitioning your SD card, it can be done through recovery, but the process will wipe the card clean, which is why it's recommended to backup everything to your computer.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Great! I just backed up EVERYTHING on the SD to my computer. I'm ready to partition and install the new ROM!
I am following this procedure, which is very thorough, but seems like it has lots of extra bits I'm not sure are necessary. My biggest concern at this point is will my GPS work??? I'm seeing a "fix" of some sort here, but seems to require an MSL code, which mine doesn't have. I'm hoping this won't be a problem!
http://forum.xda-developers.com/showthread.php?t=1386911
Okay, so I've partitioned the SD card, but when I went to do this step....
"Once the process is complete, select Upgrade EXT 2 to EXT 3. Do not use EXT 4 On Sense ROMS. DEFINITELY use EXT4 on newer AOSP ROMS. Your SD Card is now partitioned and you’re ready to restore your backup and flash your custom ROM so back out, go to USB-MS Toggle, select it and copy everything from the EVO Backup folder on your computer, back to your SD Card."
It didn't work... This is the error message I get... "Oops... Something went wrong! Please check the recovery log."
Is this necessary once the SD card has been partitioned? Please advise.
I am using an AOSP ROM, so how to I upgrade to Ext 4?
It seems like once this is done, I am ready to carryover the backup files from my PC, wipe, and install the new ROM.
So, the first ROM I tried failed, so I tried another and it worked beautifully.
So... I'm having a few more questions as I go to get it set up.
1) I use a hosted exchange service for my work and I had trouble getting this set up using the ROM. I was hoping to see an ActiveSync option. Should I download some sort of ActiveSync app to do this??
2) I have a Gmail account that I use for everything, but it's so full of $h*&t that I don't use the email account anymore. Of course, Google being the online superpower, I'd love to get a hold of a human being there that could help me... I'd like to get a new Gmail account and then close my old one, but some how merge all my other bits (Picasaweb, Voice, and all of my Chrome settings to the new address.
I don't want to use the Gmail address with this one, as previously it was throwing all of these random Gmail contacts who I don't even know who they are into my contacts list. I don't want to use that address for Mail or Contacts on my phone!
Last, but not least....
3) I backed up all the apps I cared about with Titanium Backup and saved them to the SD card. So, how do I reload that application off the SD card and restore the apps I had previously backed up through that application???
And, is there an HTC Sense style Android Weather widget for AOSP ROM's??
I'd like to get something that is visually a lot better looking than this crappy Weather channel widget that came with my ROM. YuK!
I am not sure about your first two questions, but to get back data saved with Titanium Backup, just download it from Google Play, click the backup/restore tab and look for your app. The name should be crossed out ( unless you already reinstalled it). Click on it and click restore and then app+data.
Here is a weather widget:
http://forum.xda-developers.com/showthread.php?t=1721809
Ok, so I'm attempting to go from stock to CM 10.1.3, but I'm running into an odd issue. Note - I'm not a newbie to installing ROMS, having done so with my old Captivate quite regularly, but I *am* a newbie to installing them on my S3.
So, the issue is this: I am rooted, CWM (6.0.3.7) is installed, I have everything backed up with the latest version of TitaniumBackup Pro, and had it create a zip file so I could install it from CWM after doing the CM install (and I do a Nandroid backup as well). I install CM 10.1.3, install GAPPS, and install TitaniumBackup from CWM. I boot up CM, load up TitaniumBackup (sometimes I have to boot into CM first, go through setup, and THEN reboot to Recovery in order to get TitaniumBackup installed properly), and TitaniumBackup can't see *any* of the files in my internal SD card. Then I check with the file browser, and sure enough, it can't see *any* of my pre-CM files either. All of the folders are there, (not just stock file folders, but ones that I've created) but it can't see any files within those folders. I also can't see any of the files when I browse through USB on my computer, but all the folders are there. Has anybody experienced something like this? Is there something really simple and stupid that I'm missing/should be checking for?
Here's my setup, pre-CM install:
Rogers Galaxy S3 (i747M)
Android 4.1.2
Baseband I747MVLDMF1
Build number JZO54K.I747MVLDMF1
I rooted and installed CWM via the method in this thread (though I got the AT&T s3 version of CWM directly from the CWM page instead of using either of the ones linked in that thread).
Any help here would be greatly appreciated. I'm tired of the stock JB that Rogers provides, and wanted to give CM a chance, but not being able to see any of the files on my SD card is frustrating me, and making me leery of keeping the install there. Worst case scenario, I can install it, format the internal SD card, and then copy everything back over from my computer via USB, but that is a REAL hassle and I'd still be left wondering if there was something else broken.
Thanks!
Also: I do a standard wipe/factory reset before installing CM. When I restore my Nandroid backup, all is back to normal. I *did* google to see if anybody else had the same problem, but my google fu has failed me. Umm, I can't think of any other pertinent information I could offer.
http://forum.xda-developers.com/showthread.php?t=2274218
Try this...:good:
DMF1977 said:
http://forum.xda-developers.com/showthread.php?t=2274218
Try this...:good:
Click to expand...
Click to collapse
Perfect! I'll try that tonight. Thanks muchly! :good:
Upon further messing about, I've found that it's still a bit flaky/unreliable. Apps randomly crashing, files and folders inaccessible and/or not visible despite being in /data/media/0, etc etc. Decided just to go back to stock for now, I'll take another stab at it some other time.