I`m running 4.4.2 and havent gotten the N900tuvudne6 update yet. Tried OTA nothing. (Yes I know its Seattle only) BUT I plug it into the PC and loadup Kies and it shows the UDNE6 Update!!! I click Continue and it says my Battery is low (39%) So I unplug it and let it charge, Charged it up.... Now theres no update.. I`ve tried restarting PC reinstalling Kies. Anyt
hyelton said:
I`m running 4.4.2 and havent gotten the N900tuvudne6 update yet. Tried OTA nothing. (Yes I know its Seattle only) BUT I plug it into the PC and loadup Kies and it shows the UDNE6 Update!!! I click Continue and it says my Battery is low (39%) So I unplug it and let it charge, Charged it up.... Now theres no update.. I`ve tried restarting PC reinstalling Kies. Anyt
Click to expand...
Click to collapse
its telling me there's no update as well, not sure why.
Related
Yesterday, I was upgrading my phone via Kies. But when it was downloading to my phone, the download stayed at 0% for about an hour so I decided to cancel it. I removed the usb and closed kies. When I opened Kies, it asked me to do emergency recovery. I did that and followed the steps. But it still stayed at 0% until now.
My phone keeps showing up a yellow triangle connecting to a PC and a phone everytime I try to reboot it. And it seems it doesn't respond to the upgrade in Kies anymore.
What should I do? Please help
P.S. My phone's battery was not fully charged before the upgrade. Did that somehow interfere?
nyaabear said:
Yesterday, I was upgrading my phone via Kies. But when it was downloading to my phone, the download stayed at 0% for about an hour so I decided to cancel it. I removed the usb and closed kies. When I opened Kies, it asked me to do emergency recovery. I did that and followed the steps. But it still stayed at 0% until now.
My phone keeps showing up a yellow triangle connecting to a PC and a phone everytime I try to reboot it. And it seems it doesn't respond to the upgrade in Kies anymore.
What should I do? Please help
P.S. My phone's battery was not fully charged before the upgrade. Did that somehow interfere?
Click to expand...
Click to collapse
Can u tell me more?
Sent from my GT-S5360
nyaabear said:
My phone keeps showing up a yellow triangle connecting to a PC and a phone everytime I try to reboot it. And it seems it doesn't respond to the upgrade in Kies anymore.
What should I do? Please help
Click to expand...
Click to collapse
Look for a USB JIG (eg. in eBay)! With that you may switch to download mode. Then you should reflash the firmware via Odin.
Or take the phone to the warranty repair centre!
Sent from my SGS using Tapatalk & Swype
Before committing yourself to buy a jig from ebay, and since obviously you want to regain control of your sgy asap, if you are up to it, you can assemble a diy jig if you follow the procedure from here:
http://forum.xda-developers.com/showthread.php?t=819551
Good luck..
found solution
Hey Friend I found Some Galaxy Y HARD BRICKS / NO-BOOT BRICKS solution frm one site try it
I bought my GS3 yesterday and wanted to update it to 4.1.1. Now i went home. downloaded the kies software. plug my phone in and downloaded the drivers. I then go to kies and it pulls up the update notification. I start the update and after the "downloading firmware update components" the screen dissappears and kies shuts down. Nothing else happens. I'm seriously pissed and confused because i don't understand. Talked with Samsung live chat several times and they give me the same step by step trouble shooting. Has anyone ever encountered this or is there a way I can officially update it, just not through Kies? I do not want cyanogen or root. I would like the official update. thanks
Mine had lots of issues. First off make sure you're running Kies as an administrator. When you run the update just walk away for about 10 minutes because it does go blank on the screen even though it's still going. That said I don't believe kies went away I think that only the update screen went away while it ran. At some point I determined that my USB 3.0 port was a problem and I had to switch to my other one which was USB 2.x. I don't know if it was the type of port that mattered or the fact that they were both on the front and just plugged up to the motherboard. I actually think the USB 3.0 has come loose inside because it doesn't work for the phone now either.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
try this
http://forum.xda-developers.com/showthread.php?t=2031840
I'm trying to update from 4.1.1 to 4.1.2..
I was on my laptop today and noticed that kies prompted me to update. And it was a different firmware.
I tried it multiple times but it always got stuck on 5% and lagged the whole laptop.. (i7 860)
So i thought i'd try it on my desktop.... But i still cant even get my desktop to reconize the CURRENT firmware version!
Desktop also taking ages to even reconize the whole phone after plugging it in. laptop reconizes fast but will not update..
Thanks.
Hey people, I've been trying for several days already but to no avail. I'm trying to KDZ my phone to stock kk but the computer can't even recognize my phone. Any ideas? Sometimes the computer does recognize my phone, then I'll immediately try the update through KDZ. It'll get stuck halfway and my phone reboots into bootloader. I've read from another thread that we should reboot our phones if that happens then the update should continue. However so, when I reboot my phone I'll hit the previous problem of the phone not being recognized by the computer, hence the update gets cancelled. I'm on PA if that helps. Anyone care to share any insights?
do you have the drivers installed?
TheJoker0 said:
do you have the drivers installed?
Click to expand...
Click to collapse
Yes I have re-downloaded them so many times already but it still doesn't work.
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
owenlad said:
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
Click to expand...
Click to collapse
I would attempt a odin stock restore next
owenlad said:
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
Click to expand...
Click to collapse
How long have you left it connected to AC for?
Maybe leave it for a few hours to ensure it is 100% charged first, try different USB ports on the PC to see if you have one (USB3.0) with higher power output
TheMadScientist said:
I would attempt a odin stock restore next
Click to expand...
Click to collapse
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
owenlad said:
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
Click to expand...
Click to collapse
That error is flashing older firmware than what is on the device
You seemed to have downloaded older firmware than on the device
TheMadScientist said:
That error is flashing older firmware than what is on the device
You seemed to have downloaded older firmware than on the device
Click to expand...
Click to collapse
hmm ive looked and tried to find the newest firmware and none of them seemed to be the newest one
the problem ive got at the moment is that when i take it out of my ac connection it just turns off and when it is plugged in it says "an error has occured while updating device....."
so i cant even try odin on it now
owenlad said:
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
Click to expand...
Click to collapse
That's the bootloader error, you need a bootloader firmware equal to or higher than the version the phone is running (B:1 or B:2 in download mode)
And firmware shows BL version here
G960FXXU2BRGA
*Detection* said:
That's the bootloader error, you need a bootloader firmware equal to or higher than the version the phone is running (B:1 or B:2 in download mode)
And firmware shows BL version here
G960FXXU2BRGA
Click to expand...
Click to collapse
AHH okay, the way you explained it helped. I spent a few hours trying to find one that match the description and it worked after switching pc and trying Odin. thanks dude
owenlad said:
hmm ive looked and tried to find the newest firmware and none of them seemed to be the newest one
the problem ive got at the moment is that when i take it out of my ac connection it just turns off and when it is plugged in it says "an error has occured while updating device....."
so i cant even try odin on it now
Click to expand...
Click to collapse
an error has occured while updating device.
You can still use odin It will detect in this screen as well