While Downloading Stock ROM From SamMobile For Samsung Galaxy Gio GT-S5660, I Came Across The Following Instructions To Install The Stock ROM:
Instructions:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
I Just Wanted To Ask IF It was Possible To Flash Gio With The New ODIN (v3.09)?
The newest Odin is 4.42 and we use it already for more than a year, so Odin 3.09 is even older
Just use 4.42 and you'll be fine.
Related
im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...
re: flashing
phordych05 said:
im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...
Click to expand...
Click to collapse
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!
Misterjunky said:
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!
Click to expand...
Click to collapse
I want a stock rooted rom...i have the t999
re: stock rom
phordych05 said:
I want a stock rooted rom...i have the t999
Click to expand...
Click to collapse
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!
Misterjunky said:
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!
Click to expand...
Click to collapse
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?
re: modem
phordych05 said:
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?
Click to expand...
Click to collapse
No, if you odin flash any rom it will over write the modem.
If your phone is a T999 (not t999v) then do this and the phone will work properly:
This will over write your modem with the proper one for a T999 phone and this will
flash the stock rooted T999 4.1.2 Jellybean rom.
Follow the instructions below.
Here is the step by step guide:
After you have followed these instructions your phone will have the new T999 4.1.2 jellybean pre-rooted firmware.
Download the stock-rooted Odin flash T999_UVDMD5 Samsung Galaxy S3 Jellybean v4.1.2 firmware.
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
But the Chinese models usually come with write protection
Ok lets say I know a noob that has a Samsung T-Mobile SGH-T999
He's been rooting and flashing around.
Getting lots of errors such as "unfortunately, the process xxxx has stopped" and nothing works right.
The noob has Odin. The noob knows how to flash with Odin.
What is the easiest way to get back to stock 4.1.1?
I whoops the noob already tried "downloading and install stock rom via odin" from the 7.0 toolkit.
He also tried the devoloper section and flashed
UVDLJA
PDA: T999UVDLJA
CSC: T999TMBDLJA
Version: 4.1.1 JB
Date: Nov. 14, 2012
Factory reset through recovery.
re: do this:
jethrob said:
Ok lets say I know a noob that has a Samsung T-Mobile SGH-T999
He's been rooting and flashing around.
Getting lots of errors such as "unfortunately, the process xxxx has stopped" and nothing works right.
The noob has Odin. The noob knows how to flash with Odin.
What is the easiest way to get back to stock 4.1.1?
I whoops the noob already tried "downloading and install stock rom via odin" from the 7.0 toolkit.
He also tried the devoloper section and flashed
UVDLJA
PDA: T999UVDLJA
CSC: T999TMBDLJA
Version: 4.1.1 JB
Date: Nov. 14, 2012
Click to expand...
Click to collapse
This guide will get your phone back up and running properly
Forget about the rootbox or any other method this will work for sure as long as you follow instructions exactly.
Easy and sure way fix your problem - Here is s step by step guide:
Download the newest pre-rooted Samsung Galaxy S3 T999 Jellybean v4.1.2 rom: http://www.androidfilehost.com/?fid=22946563261203914
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
http://forum.xda-developers.com/showthread.php?t=1949687
Sent from my SGH-T999 using Tapatalk 2
This man you speak of must be a n00b.. lol
Sent from my SGH-T999 using xda premium
So, I have the omnifarious's 4.3 ROM(http://forum.xda-developers.com/showthread.php?t=2532714) installed on my phone. I did not update the bootloader or baseband. The baseband is still showing MDL.
I see data drops sometimes. So, I wanted to try to upgrade the GSM modem to MK2 to see if the data drop issue goes away while staying at MDL bootloader.
When I run ODIN in download mode and just try to flash the radio from this post (http://forum.xda-developers.com/showthread.php?t=2544612) it fails. Even doing the modem.bin alone fails.
Do I need to flash back to stock 4.2.2 to be able to update my radio?
re: modem
devsk said:
So, I have the omnifarious's 4.3 ROM(http://forum.xda-developers.com/showthread.php?t=2532714) installed on my phone. I did not update the bootloader or baseband. The baseband is still showing MDL.
I see data drops sometimes. So, I wanted to try to upgrade the GSM modem to MK2 to see if the data drop issue goes away while staying at MDL bootloader.
When I run ODIN in download mode and just try to flash the radio from this post (http://forum.xda-developers.com/showthread.php?t=2544612) it fails. Even doing the modem.bin alone fails.
Do I need to flash back to stock 4.2.2 to be able to update my radio?
Click to expand...
Click to collapse
If you want to flash back to 4.2.2 stock you can do it no problem, since your phone already has the
4.2.2 MDL modem/radio in it because you have not yet updated to the MK2 modem.bin image.
You don't need to flash back to stock to flash MK2 4.3 modem, you can flash it on 4.2.2 stock.
-----------------------------------------------------------------------------------------------------------
All you need to do is to Odin flash the MK2 MODEM.BIN to get the 4.3 MK2 baseband.
Here is the direct download link for the modem.bin file:
http://www.mediafire.com/download/1gsjokadys4l89x/modem.bin
Flash it in Odin's PHONE slot. (not pda).
Good luck!
That's what I was trying to do. I tried to flash modem.bin from Odin and it failed.
re: modem.bin
Try this MK2 modem.bin, a lot of people used this already including myself and it worked!
http://download1276.mediafire.com/db...l89x/modem.bin
Flash using Odin's PHONE slot. (NOT PDA)
Flashing guide:
Do not connect the usb cable until step #3
1: Open Odin and put this MODEM.BIN file into Odin's PHONE slot & un-check "auto reboot"
2: Power off the phone manually (power button only)
3: Restart the phone in download mode (power+vol-down)
4: Connect USB cable from phone to computer
5: Make sure that Odin's [COM:xx] lights up
6: Click START in Odin
7: When done unplug the usb cable
8: Power off the phone manually using power button only.
9: Wait 20 seconds or so before powering up the phone.
If you followed these step by step instructions you should
see MK2 in "About Phone" (Settings>More>About phone)
It does not matter which version of ODIN you are using, all ODIN versions work fine.
Good luck!
Misterjunky said:
Try this MK2 modem.bin, a lot of people used this already including myself and it worked!
http://download1276.mediafire.com/db...l89x/modem.bin
Flash using Odin's PHONE slot. (NOT PDA)
Flashing guide:
Do not connect the usb cable until step #3
1: Open Odin and put this MODEM.BIN file into Odin's PHONE slot & un-check "auto reboot"
2: Power off the phone manually (power button only)
3: Restart the phone in download mode (power+vol-down)
4: Connect USB cable from phone to computer
5: Make sure that Odin's [COM:xx] lights up
6: Click START in Odin
7: When done unplug the usb cable
8: Power off the phone manually using power button only.
9: Wait 20 seconds or so before powering up the phone.
If you followed these step by step instructions you should
see MK2 in "About Phone" (Settings>More>About phone)
It does not matter which version of ODIN you are using, all ODIN versions work fine.
Good luck!
Click to expand...
Click to collapse
I have done these steps to the T like 5 times and it still fails.... I have no idea what else to try.
Quick question: What does the "Write protection: enable" mean in the download mode on the left top corner of the screen? Does it show that for you too? I see both status fields as "custom". What does that mean? I think something is not allowing me to overwrite the radio in this phone.
Hello guys,
I am using I9195 . i was on stock KK 4.4 . am flashes CM13 official by TWRP 3.0.1-0 it is successfully booted and working fine. But now i am want to revert back to Stock KK 4.4 again i afraid to hardbrick my device. If anyone guide me to how to revert back i will thankful to him.
Thanks in advance.
Sent from my AO5510 using Tapatalk
first download your own region stock firmware tar.md5 for the intended model. in the link below it is for my model, do not flash that, search for yours model and region.
you can follow steps in the link below and also you can download firmware from there.
http://www.sammobile.com/firmwares/download/62533/I9190UBUCOF1_I9190PNTCOD1_PNT/
here i copy paste the instructions.
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
i have i9190 model, and have flash stock firmware alot form cm13 or 12.1, never bricked, also when you done flashing goto recover and restore factory setting and clear cache if stuck at samsung logo.
can i go back version from 4.4 To 4.2 ?
my device is GT-I9192
yes you can with odin program.
you must to download the 4.2.2 stock firmware and put in AP button of Odin 3.09 and click start if your phone is plugged in download mode
Make sure you have downloaded right firmware. Downgrade works only with: i9195UBUBNE2. If you use other JB version you softbrick your handset.
DarkJoker360 said:
yes you can with odin program.
you must to download the 4.2.2 stock firmware and put in AP button of Odin 3.09 and click start if your phone is plugged in download mode
Click to expand...
Click to collapse
Experimented with and without interest