Related
Hi! I've searched looking for a recovery that works on v163 of LU6200 but can't find one. I was able to root my phone without downgrading its firmware but the CWM installed through Rom Manager doesn't work at all. I only get "Enter Fast Boot, Long time no see!" message and it's stuck on that page forever. I was looking for a thread where I can ask this but I also can't find one relevant. I apologize if creating this thread is inappropriate. Hoping I can get some help.
edit: For some reason, KDZ flasher doesn't work on my netbook which is my only computer. I'm not able to downgrade the firmware.
I think the appropriate way to root v163 is to downgrade to v135 and root, then flash v163 and root and install cwm recovery. Anyway I replied to you through PM sir.
Tnx kabayan. Will try +1
Welcome kababayan.
dakz03 said:
Hi! I've searched looking for a recovery that works on v163 of LU6200 but can't find one. I was able to root my phone without downgrading its firmware but the CWM installed through Rom Manager doesn't work at all. I only get "Enter Fast Boot, Long time no see!" message and it's stuck on that page forever. I was looking for a thread where I can ask this but I also can't find one relevant. I apologize if creating this thread is inappropriate. Hoping I can get some help.
edit: For some reason, KDZ flasher doesn't work on my netbook which is my only computer. I'm not able to downgrade the firmware.
Click to expand...
Click to collapse
Hi.
I have same problem after flash CWM from ROM Manager,is it possible flash only CWM Recovery or flash Stock Recovery?
The LU6200 4.0.4 is rooted,but I can't flash CWM.
Looks like im stuck. I cant even enter downlod mode to flash a rom. Same page i get when reboting into recovery/download mode
Try to turn off your device, remove the battery and reinsert the battery but don't turn it on yet. Plug your device to your laptop/pc, then boot to download mode (VOL UP + POWER BUTTON)
[[SOLVED]]
Alright, so I checked through a few pages on the forums, and I didn't see anyone posting about this issue I am having..
I purchased my S3 a few days ago, and instantly rooted it. I used the Odin3 v3.07 method with "root66_SPR_L10VPBLJ7.7Z" ROM. That went well and fine. Then I tried flashing CWM recovery, and when I booted into recovery, it was still the stock. So I downloaded ROM Mangager and flashed the touch CWM recovery, after it finished, it asked if I wanted to boot into recovery. I agreed. Then the phone restarted, and upon starting, it showed the SAMSUNG logo, and "recovery booting" in the top left corner for about half a second. Then it just stayed on a black screen. I could do nothing after that. I then took the battery out for about 5 minutes, threw it back in, and the phone started. So I tried to manually boot into recovery, and the same issue. Took the battery out again, phone started properly, so I then tried to get into download mode. That worked fine, so I downloaded the CWM recovery on my laptop, and connected the phone through Odin, and flashed CWM onto my phone. Odin said it passed, but I still have the same issue when I try to boot into recovery.
Any ideas on something I'm doing wrong?
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
m20120 said:
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
Click to expand...
Click to collapse
Correct; and the reason for this is because the updated stock firmware as a script basically that re-flashes stock recovery upon boot if stock isn't detected. The team epic zip removes that. After doing that; I'd recommend flashing the twrp recovery.
Need some Help!
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Re: [Q] Recovery Broken, Need Help
shadowcop9514 said:
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Click to expand...
Click to collapse
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Okay I did some research, and I found online that the Samsung phones need .tar.md5 not .img files for recovery.
http://forum.xda-developers.com/showthread.php?t=1484304
I did not use these directions since I don't run linux, and I wasn't going to download VMWare. Anyways, the way I fixed it, I purchased and downloaded Mobile Odin from the Play store. I put the recovery.img on my external SDcard, then opened the app. Under "recovery" I selected recovery.img and then scrolled down to "Flash" It flashed the recovery.img with no problems, then booted me into recovery. I then flashed mrRobinson_Ashaman.v2.20_signed.zip so I could uninstall some bloatware.
That last part was mostly for me, until I find a ROM I like.
CNexus said:
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Click to expand...
Click to collapse
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
shadowcop9514 said:
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
Click to expand...
Click to collapse
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
CNexus said:
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
Click to expand...
Click to collapse
Ok, where do I find that ?
shadowcop9514 said:
Ok, where do I find that ?
Click to expand...
Click to collapse
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
CNexus said:
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
Click to expand...
Click to collapse
Ok thanks!
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Ruscicap said:
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Click to expand...
Click to collapse
The device is indeed booting off the SD card. However, if you can boot into system, you should also be able to boot into download and recovery modes using the 3-button combo. If you can get into download mode, you can try using Odin v 3.07 to flash the complete 4.3 stock image. Download the Odin flashable zip file from the link below to your computer. Extract the tar.md5 file and verify the MD5 to be sure it downloaded correctly.
http://www.androidfilehost.com/?fid=23329332407590581
Download Odin v3.07 and run Odin.exe for the flashing tool. With your debrick card, boot into download mode by pressing the Volume Down, Home and Power button. If you can't get into download mode with the 3-button combo, suggest you try a USB jig. Use Odin to flash the stock file to your phone. If the flashing is successful, the device should be able to boot normally after this without the debrick card.
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Ruscicap said:
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Click to expand...
Click to collapse
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Thanks Larry ordering jig tomorrow
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Larry2999 said:
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Click to expand...
Click to collapse
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Ruscicap said:
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Click to expand...
Click to collapse
Yes, the ONLY way to recover is to flash a complete 4.3 stock image. Are you sure you bricked in the first instance by flashing 4.3 via Odin? The only Odin compatible stock 4.3 file I'm aware of is the one in the link I forwarded earlier. This was only recently developed and appears to have been used by several people without problem. You may check to be sure you were not trying to flash a 4.1.1 file in error. Apologies if I sound like I'm second guessing you but flashing 4.1.1 via Odin usually results in the kind of hard brick you experienced.
The other alternative would be to flash custom recovery (TWRP or CWM) via Odin and then use custom recovery to flash a complete 4.3 stock image. You will find the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip for your preferred custom recovery option to your PC and save to your phone's internal storage. If you want to use TWRP, you can find the Odin flashable file for TWRP via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
If, however, you go the first option and flash the 4.3 file via Odin, be sure to use Odin v 3.07. You'll see the Odin flashable file and instructions on page 4 of the following thread ...
http://forum.xda-developers.com/showthread.php?t=2722660&page=4
or you can download directly from here ...
http://www.androidfilehost.com/?fid=23329332407590581
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Ruscicap said:
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Click to expand...
Click to collapse
The file from that thread is for (custom) recovery only. You can't flash zips via Odin so if you are using that file, you would need to first install custom recovery via Odin and then flash the zip via custom recovery.
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Ruscicap said:
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Click to expand...
Click to collapse
Glad to know it's working OK now. Kind regards
As the title says, i need a fix to fix my broken stock recovery. Running stock rom UBNG3. I found a link http://forum.xda-developers.com/showthread.php?t=1932327 but its a fix for Galaxy Note. Don't know whether this could be flashed on my phone. Although I think that if the above fix is flashable it could solve the gallery app bug but don't know for sure.
Let me explain the whole story. Back in the days when 4.2.2 rom was leaked i flashed it and then flashed the official 4.2.2 rom but since then my recovery is broken. I did not care about it until now when i wanted to root my phone. Flashed cwm recovery a number of times but kept booting into stock. An option in the rooting guide suggested to re flash the whole rom but setting up the phone again is not an option for me. Its just a big pain. What i want is a fix to fix the broken recovery so that when i flash cwm, it actually shows up.
Thanx for any help anyone could provide.
KD25 said:
As the title says, i need a fix to fix my broken stock recovery. Running stock rom UBNG3. I found a link http://forum.xda-developers.com/showthread.php?t=1932327 but its a fix for Galaxy Note. Don't know whether this could be flashed on my phone. Although I think that if the above fix is flashable it could solve the gallery app bug but don't know for sure.
Let me explain the whole story. Back in the days when 4.2.2 rom was leaked i flashed it and then flashed the official 4.2.2 rom but since then my recovery is broken. I did not care about it until now when i wanted to root my phone. Flashed cwm recovery a number of times but kept booting into stock. An option in the rooting guide suggested to re flash the whole rom but setting up the phone again is not an option for me. Its just a big pain. What i want is a fix to fix the broken recovery so that when i flash cwm, it actually shows up.
Thanx for any help anyone could provide.
Click to expand...
Click to collapse
From 4.2.2 you need to flash ur recovery using ODIN.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Use ODIN to flash CWM Recovery
ClockworkMod recovery with SELinux support
bodmar said:
From 4.2.2 you need to flash ur recovery using ODIN.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Use ODIN to flash CWM Recovery
ClockworkMod recovery with SELinux support
Click to expand...
Click to collapse
I think you have not understood my problem. My stock recovery is broken.. that dead android thing? I have not been able to get cwm work. Odin shows the success status but every time i boot into stock recovery instead of cwm.
i didnt misunderstand... CWM recovery isnt working....try to re-flash again using Odin in dowload window on fone..
or update 4.2.2 using kies and start again
or
Use Odin and stock rom for ur region
http://www.sammobile.com/firmwares/3/?download=28283
OR
try to flash PHILZ TOUCH recovery
http://forum.xda-developers.com/showthread.php?t=2452985
phone sold. thread closed
Hi everyone in XDA
So my issue is that I have a Grand Duos and I had the CWM recovery (Philz Touch 6.12.8) installed in it, and I wanted to install a new ROM, but installing it in CWM indicated error of installation so I wanted to try installing it in TWRP. I didn't know how to install the TWRP but I just flashed it with the CWM and then I turn the phone off and tried to get in the new TWRP, but suddenly it got stuck in the Samsung Grand DUOS GT-I9082 screen, no TWRP not turning on, the only thing i can do is enter the DOWNLOAD mode. So then I tried to install back the CWM but Odin could'n program it, I also downloaded the stock firmware of the Gand Duos and again it couldn't install it. I have the drivers installed and tried with many other versions of Odin but still not working.
ANYONE PLEASE HELP ME
Phone: Samsung Galaxy Grand Duos GT-I9082 european standart already upgraded to android 4.2.2 officially
Stock ROM
Hello Saniii,
Normally when things like this happen the wisest and more sure thing to do is to go back to a 4.1.2 ROM. Search for the ROM if you can remember that shipped with your phone. Use ODIN and flash it back to stock ROM. Don't root it or do anything yet. I tend to let the system boot and atleast get to the wizard and wait a minute or so to then go on to reboot download mode and then you can try to root it. I've never like TWRP much, I've kinda been using CWM for years so I wouldn't know, but I'd go with the early Philz Touch, and then I tend to do k2wl latest modded CWM.
Let me know how that works out
Paul
saniii said:
Hi everyone in XDA
So my issue is that I have a Grand Duos and I had the CWM recovery (Philz Touch 6.12.8) installed in it, and I wanted to install a new ROM, but installing it in CWM indicated error of installation so I wanted to try installing it in TWRP. I didn't know how to install the TWRP but I just flashed it with the CWM and then I turn the phone off and tried to get in the new TWRP, but suddenly it got stuck in the Samsung Grand DUOS GT-I9082 screen, no TWRP not turning on, the only thing i can do is enter the DOWNLOAD mode. So then I tried to install back the CWM but Odin could'n program it, I also downloaded the stock firmware of the Gand Duos and again it couldn't install it. I have the drivers installed and tried with many other versions of Odin but still not working.
ANYONE PLEASE HELP ME
Phone: Samsung Galaxy Grand Duos GT-I9082 european standart already upgraded to android 4.2.2 officially[/QUOTE
Dear Saniii,
Please do following steps to resolve the issue.
1) Have latest Philz Recovery/CWM Recovery and Odin 3.0+ version
2) Boot to Download Mode
3) Install CWM/Philz Recovery
4) In philz Recovery there is an option of Clean Install for a New ROM.
5) After clean install you can insatll any custom ROM.
6) If this solves problem hit thanks. :good::good::good:
Note: If you want to flash Kitkat ROM, you need to flash Stock ROM 4.2.2 first only then follow the above steps.
Click to expand...
Click to collapse
hemant4409 said:
3) Install CWM/Philz Recovery
4) In philz Recovery there is an option of Clean Install for a New ROM.
5) After clean install you can insatll any custom ROM..
Click to expand...
Click to collapse
Philz latest Recovery doesn't work with Touchwiz roms and always gives status 2 error
Paul_Days said:
Hello Saniii,
Normally when things like this happen the wisest and more sure thing to do is to go back to a 4.1.2 ROM. Search for the ROM if you can remember that shipped with your phone. Use ODIN and flash it back to stock ROM. Don't root it or do anything yet. I tend to let the system boot and atleast get to the wizard and wait a minute or so to then go on to reboot download mode and then you can try to root it. I've never like TWRP much, I've kinda been using CWM for years so I wouldn't know, but I'd go with the early Philz Touch, and then I tend to do k2wl latest modded CWM.
Let me know how that works out
Paul
Click to expand...
Click to collapse
Hello Paul, I just tried it but nothing works, in odin mode, everything you flashes, it get stuck in <<get PIT for mapping...>> or <<SetupConnection...>>. I tried inserting a i9082 PIT file in re-partition field but it doesn't work , what can I do now?
hemant4409 said:
saniii said:
Hi everyone in XDA
So my issue is that I have a Grand Duos and I had the CWM recovery (Philz Touch 6.12.8) installed in it, and I wanted to install a new ROM, but installing it in CWM indicated error of installation so I wanted to try installing it in TWRP. I didn't know how to install the TWRP but I just flashed it with the CWM and then I turn the phone off and tried to get in the new TWRP, but suddenly it got stuck in the Samsung Grand DUOS GT-I9082 screen, no TWRP not turning on, the only thing i can do is enter the DOWNLOAD mode. So then I tried to install back the CWM but Odin could'n program it, I also downloaded the stock firmware of the Gand Duos and again it couldn't install it. I have the drivers installed and tried with many other versions of Odin but still not working.
ANYONE PLEASE HELP ME
Phone: Samsung Galaxy Grand Duos GT-I9082 european standart already upgraded to android 4.2.2 officially[/QUOTE
Dear Saniii,
Please do following steps to resolve the issue.
1) Have latest Philz Recovery/CWM Recovery and Odin 3.0+ version
2) Boot to Download Mode
3) Install CWM/Philz Recovery
4) In philz Recovery there is an option of Clean Install for a New ROM.
5) After clean install you can insatll any custom ROM.
6) If this solves problem hit thanks. :good::good::good:
Note: If you want to flash Kitkat ROM, you need to flash Stock ROM 4.2.2 first only then follow the above steps.
Click to expand...
Click to collapse
Hi Hemant, the issue is in that it doesn't flash anything in odin, getting stuck in <<Get PIT for mapping...>> or <<SetupConnection...>>
Click to expand...
Click to collapse
saniii said:
hemant4409 said:
Hi Hemant, the issue is in that it doesn't flash anything in odin, getting stuck in <<Get PIT for mapping...>> or <<SetupConnection...>>
Click to expand...
Click to collapse
You need to download Stock ROM, it will hang for some time because it will check the file but if you are able to boot in download mode i dont think there would be any problem
If still problem persist please give a snap what exactly your are facing.
Click to expand...
Click to collapse
It happens to me sometimes and its very irritating when it stuck there. You can do several things
1st- change your usb cable
2nd - try it again again when it stucks, turn off your computer and your phone too by removing battery of phone and then try again. 3rd - try to install it fron another computer but 1st install Samsung kies then odin then install your stock firmware
Sent from my GT-I9082 using XDA Free mobile app