[[SOLVED]]
Alright, so I checked through a few pages on the forums, and I didn't see anyone posting about this issue I am having..
I purchased my S3 a few days ago, and instantly rooted it. I used the Odin3 v3.07 method with "root66_SPR_L10VPBLJ7.7Z" ROM. That went well and fine. Then I tried flashing CWM recovery, and when I booted into recovery, it was still the stock. So I downloaded ROM Mangager and flashed the touch CWM recovery, after it finished, it asked if I wanted to boot into recovery. I agreed. Then the phone restarted, and upon starting, it showed the SAMSUNG logo, and "recovery booting" in the top left corner for about half a second. Then it just stayed on a black screen. I could do nothing after that. I then took the battery out for about 5 minutes, threw it back in, and the phone started. So I tried to manually boot into recovery, and the same issue. Took the battery out again, phone started properly, so I then tried to get into download mode. That worked fine, so I downloaded the CWM recovery on my laptop, and connected the phone through Odin, and flashed CWM onto my phone. Odin said it passed, but I still have the same issue when I try to boot into recovery.
Any ideas on something I'm doing wrong?
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
m20120 said:
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
Click to expand...
Click to collapse
Correct; and the reason for this is because the updated stock firmware as a script basically that re-flashes stock recovery upon boot if stock isn't detected. The team epic zip removes that. After doing that; I'd recommend flashing the twrp recovery.
Need some Help!
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Re: [Q] Recovery Broken, Need Help
shadowcop9514 said:
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Click to expand...
Click to collapse
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Okay I did some research, and I found online that the Samsung phones need .tar.md5 not .img files for recovery.
http://forum.xda-developers.com/showthread.php?t=1484304
I did not use these directions since I don't run linux, and I wasn't going to download VMWare. Anyways, the way I fixed it, I purchased and downloaded Mobile Odin from the Play store. I put the recovery.img on my external SDcard, then opened the app. Under "recovery" I selected recovery.img and then scrolled down to "Flash" It flashed the recovery.img with no problems, then booted me into recovery. I then flashed mrRobinson_Ashaman.v2.20_signed.zip so I could uninstall some bloatware.
That last part was mostly for me, until I find a ROM I like.
CNexus said:
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Click to expand...
Click to collapse
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
shadowcop9514 said:
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
Click to expand...
Click to collapse
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
CNexus said:
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
Click to expand...
Click to collapse
Ok, where do I find that ?
shadowcop9514 said:
Ok, where do I find that ?
Click to expand...
Click to collapse
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
CNexus said:
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
Click to expand...
Click to collapse
Ok thanks!
Related
Galaxy S3 from at&t, i rooted my phone as soon as got it several months ago, I've flashed colockwordmode 3 times in the last day or so and i cannot make to work, i followed the steps exactly as described, Odin is showing the green pass, the binary cont is increasing every time I've tried but i can't get the phone to start in recovery mode by holding volume up, home and power! it just reboot and turns the phone on or it goes into the Samsung recovery mode (blue screen). Very frustrating!, anyone can please help.
BTW, when i rooted my phone i installed clockwordmode then and it worked fine, i had not has to use it since, I'm running the stock ROM i want to flash another ROM, before i do that i need to use clockworkmode and that's when i realized that it was not working anymore, then tried to flash it 3 times but no success. I still have root.
Have you tried twrp?
athens71 said:
Galaxy S3 from at&t, i rooted my phone as soon as got it several months ago, I've flashed colockwordmode 3 times in the last day or so and i cannot make to work, i followed the steps exactly as described, Odin is showing the green pass, the binary cont is increasing every time I've tried but i can't get the phone to start in recovery mode by holding volume up, home and power! it just reboot and turns the phone on or it goes into the Samsung recovery mode (blue screen). Very frustrating!, anyone can please help.
BTW, when i rooted my phone i installed clockwordmode then and it worked fine, i had not has to use it since, I'm running the stock ROM i want to flash another ROM, before i do that i need to use clockworkmode and that's when i realized that it was not working anymore, then tried to flash it 3 times but no success. I still have root.
Click to expand...
Click to collapse
This will happen until you load a custom rom I believe. Same thing happened to me then when I installed a rom it started being able to boot into cwm
Sent from my SGH-I747 using xda premium
athens71 said:
Galaxy S3 from at&t, i rooted my phone as soon as got it several months ago, I've flashed colockwordmode 3 times in the last day or so and i cannot make to work, i followed the steps exactly as described, Odin is showing the green pass, the binary cont is increasing every time I've tried but i can't get the phone to start in recovery mode by holding volume up, home and power! it just reboot and turns the phone on or it goes into the Samsung recovery mode (blue screen). Very frustrating!, anyone can please help.
BTW, when i rooted my phone i installed clockwordmode then and it worked fine, i had not has to use it since, I'm running the stock ROM i want to flash another ROM, before i do that i need to use clockworkmode and that's when i realized that it was not working anymore, then tried to flash it 3 times but no success. I still have root.
Click to expand...
Click to collapse
flash recovery again in odin but make sure the "auto reboot" box is NOT checked. once its done flashing, unplug it and remove the battery for a second. replace the battery and immediately hold down vol up+home+power. this should take you into cwm if it flashed correctly
this could happen when you didn't root it properly
anyways, if you are rooted(as you said), get twrp and see
+1 for twrp
athens71 said:
I still have root.
Click to expand...
Click to collapse
If you still have root, you might want to try installing CWM directly from your phone, using the dd terminal command to copy CWM into the right partition:
Download the latest CWM .img file from CWM's site: http://www.clockworkmod.com/rommanager
Put the file in your phone. For simplicity reason, I would suggest you put it in the root of your internal SD card. And because you will need to type the whole path+filename in the terminal in your phone, I would also suggest you rename the file to something simple, like cwm.img;
If you don't already have it, install Android Terminal Emulator;
Now, open the terminal emulator, and type the following commands:
Code:
su
dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p18
(That is, if you rename the CWM file to "cwm.img" and you actually put it in the root of your internal SD card. If you put it somewhere else or did not rename your file, you will need to adapt the "if=" part of the command.)
Profit.
athens71 said:
Galaxy S3 from at&t, i rooted my phone as soon as got it several months ago, I've flashed colockwordmode 3 times in the last day or so and i cannot make to work, i followed the steps exactly as described, Odin is showing the green pass, the binary cont is increasing every time I've tried but i can't get the phone to start in recovery mode by holding volume up, home and power! it just reboot and turns the phone on or it goes into the Samsung recovery mode (blue screen). Very frustrating!, anyone can please help.
BTW, when i rooted my phone i installed clockwordmode then and it worked fine, i had not has to use it since, I'm running the stock ROM i want to flash another ROM, before i do that i need to use clockworkmode and that's when i realized that it was not working anymore, then tried to flash it 3 times but no success. I still have root.
Click to expand...
Click to collapse
Just curious: are you trying to flash CWM via Odin? If so where did you get it from? Did you install a botched version of stock recovery maybe (or one that is from another model of S3)? Try TWRP from here http://forum.xda-developers.com/showpost.php?p=28019751&postcount=1. It is at the bottom of the post and it is labeled "Odin Flashable TWRP Recovery" under Miscellaneous files. Download and install via Odin.
And if you are on Jelly Bean, your flash counter will increment in your dealings with custom recoveries and roms. You only option at this point (if you have root still) is to get Triangle Away and run it in order to reset the counter. However, even if you clear your flash counter, if you go back into recovery it will trip again.
drock212 said:
This will happen until you load a custom rom I believe. Same thing happened to me then when I installed a rom it started being able to boot into cwm
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I'm still using stock ROM, i'd like to install a custom ROM but i'm reading that you have to have Clockworkmod to do a successful install.
When i check in the files of the phone (sd card) i can see the clockwordmod folder in there there but still can't get it to boot into cwm recovery, only the Samsung recovery and I've tried the volume up home and power button so many times but no success.
Why do you think it worked when i first rooted the phone and not now?
this is frustrating, thanks for the help.
aybarrap1 said:
Just curious: are you trying to flash CWM via Odin? If so where did you get it from? Did you install a botched version of stock recovery maybe (or one that is from another model of S3)? Try TWRP from here http://forum.xda-developers.com/showpost.php?p=28019751&postcount=1. It is at the bottom of the post and it is labeled "Odin Flashable TWRP Recovery" under Miscellaneous files. Download and install via Odin.
And if you are on Jelly Bean, your flash counter will increment in your dealings with custom recoveries and roms. You only option at this point (if you have root still) is to get Triangle Away and run it in order to reset the counter. However, even if you clear your flash counter, if you go back into recovery it will trip again.
Click to expand...
Click to collapse
Yes I've tried 3 times via Odin, i can't remember where i got the cmw file from, it's a tar file (clockworkmod.TAR), the part i don't understand is why when i first rooted the phone in August cwm worked, i used it to install the root and now after trying to install it again 3 times i can't get it to work.
I'm using the stock ROM, not jelly bean.
thanks for any help
xBeerdroiDx said:
flash recovery again in odin but make sure the "auto reboot" box is NOT checked. once its done flashing, unplug it and remove the battery for a second. replace the battery and immediately hold down vol up+home+power. this should take you into cwm if it flashed correctly
Click to expand...
Click to collapse
I've tried it with "auto reboot" check and without but still no luck. Like i said it reboots in the Samsung rm.
androidsavage23 said:
Have you tried twrp?
Click to expand...
Click to collapse
No i have not, i can't find where to get it for galaxy S3 at&t! would you know where i could find it?
Thank you
athens71 said:
No i have not, i can't find where to get it for galaxy S3 at&t! would you know where i could find it?
Thank you
Click to expand...
Click to collapse
Download goo manager app and open that. There will be an option to "install open recovery" in the menu. Voilà a superior recovery that's easier to use
You can even use it to boot into recovery or install the new update for it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
athens71 said:
No i have not, i can't find where to get it for galaxy S3 at&t! would you know where i could find it?
Click to expand...
Click to collapse
Easiest way to install TWRP is using GooManager from the Play Store.
1. Open GooManager.
2. Press the menu key to open the contextual menu, and select Install OpenRecoveryScript.
3. The app will ask you to confirm you really want to install a new recovery image.
4. GooManager searches for the correct TWRP build for your device. Look at the Filename line, it should display openrecovery-twrp-2.4.1.0-d2att.img for AT&T or openrecovery-twrp-2.4.1.0-d2can.img for Rogers/Bell/Telus. Again, confirm the installation.
5. Wait for the download to begin. TWRP will install. Done.
If it does not work or if GooManager does not find the correct build for your device -- in this latter case, this should raise a flag for you, as you may not have a SGH-i747/SGH-i747M; double check your phone model --, you can always install TWRP manually. From TWRP website (http://www.teamw.in/project/twrp2), you can grab the IMG file to manually install from the terminal emulator, and a TAR file to install using ODIN.
athens71 said:
I've tried it with "auto reboot" check and without but still no luck. Like i said it reboots in the Samsung rm.
Click to expand...
Click to collapse
Did you try it exactly as i said to?
drock212 said:
This will happen until you load a custom rom I believe. Same thing happened to me then when I installed a rom it started being able to boot into cwm
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
So if that's the case (This will happen until you load a custom ROM) how can i back up my stuff before installing a new ROM? that's the reason i was trying to make cwm work so i could back my stuff.
Is there a different way to do a full back up?
thanks
xBeerdroiDx said:
Did you try it exactly as i said to?
Click to expand...
Click to collapse
Yes i did, when i tried to flash cmw 3 times yesterday, the description was exactly like yours.
thanks you
athens71 said:
Yes i did, when i tried to flash cmw 3 times yesterday, the description was exactly like yours.
thanks you
Click to expand...
Click to collapse
if you have root, download Rom Manager and install cwm from the menu.
i've also heard that, if rooted, you can erase /system/recovery-from-boot.p and /system/etc/install-recovery.sh (using ES File Explorer or Root Explorer) an that will make cwmstick. this is due to newer software versions overwriting your stock recovery on reboot.
xBeerdroiDx said:
if you have root, download Rom Manager and install cwm from the menu.
i've also heard that, if rooted, you can erase /system/recovery-from-boot.p and /system/etc/install-recovery.sh (using ES File Explorer or Root Explorer) an that will make cwmstick. this is due to newer software versions overwriting your stock recovery on reboot.
Click to expand...
Click to collapse
By installing cwm from the app store (ROM manger) will i get the same back up as i would with Odin install of cwm, in other words do i risk loosing my back up ROM using "ROM manager?"
thanks
athens71 said:
By installing cwm from the app store (ROM manger) will i get the same back up as i would with Odin install of cwm, in other words do i risk loosing my back up ROM using "ROM manager?"
thanks
Click to expand...
Click to collapse
you've created a backup already? if not, install cwm from ROM Manager, boot into cwm recovery and make your nandroid there. then you'll be all set to to try a new ROM
I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks
northstar7 said:
I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks
Click to expand...
Click to collapse
If you a can boot into recovery than you aren't bricked.
You can do a factory reset that might clear it up.
Worst case go into download mode and use Odin to reinstall the stock ROM.
Sent from my SGH-I747 using xda app-developers app
northstar7 said:
I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks
Click to expand...
Click to collapse
Im assuming you powered down, did a battery pull and powered back up? Factory reset?
What error message is displayed when trying to restore a backup?
The latest cwm release is 6.0.2.8. If you came from 6.0.2.3, I would download a cwm flashable zip of that recovery and flash that. Perhaps try a reboot then. If it's still a no-go, try restoring a backup with the cwm you had just downloaded and flashed to see if it will restore without an error message
Different CWM
xBeerdroiDx said:
Im assuming you powered down, did a battery pull and powered back up? Factory reset?
What error message is displayed when trying to restore a backup?
The latest cwm release is 6.0.2.8. If you came from 6.0.2.3, I would download a cwm flashable zip of that recovery and flash that. Perhaps try a reboot then. If it's still a no-go, try restoring a backup with the cwm you had just downloaded and flashed to see if it will restore without an error message
Click to expand...
Click to collapse
Thanks very much for the advice.
For the record, my phone is displaying "ClockworkMod Recovery v6.0.2.9"
I just has this happen to me as well. I just put the s3 in download mode and used Odin to re flash cwm. I'm using the same version cwm.
Sent from my SAMSUNG-SGH-I747 using xda premium
I as well. Tried everything and no go. Will try ODIN and see if it works.
Domoo said:
I just has this happen to me as well. I just put the s3 in download mode and used Odin to re flash cwm. I'm using the same version cwm.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
stranglely pressing the recovery button combo fixed it and im back in CM10.1 #lolwut?
In the end I got the phone working again
For whatever reason, after getting that update to ClockworkMod, the phone would not boot.
I followed the Beginners' Guide to Rooting the Galaxy S3 forum. When I was finished I immediately got an OTA update from ATT.
So now the phone is running again, but I've lost most of my customization and personal data.
What is with this CWM "upgrade?" Or is the problem with ROM Manager?
More likely is that I did something wrong.
At least I can make calls now.
Same here, stay away from that update! Bad things!
This also happened to me. Cwm is showing up as .9 instead of .8. I flashed a previous version of twrp and it still proceeded to go into recovery mode after selecting reboot. I did a factory reset and re flashed aokp and also cm10.1 (along with gapps of course) and it still did it. So I pulled the battery and put it into download mode and reset it from there. That's the only way to get the phone to boot up. From what I see here, is the basic fix for this problem flashing an older cwm in Odin?
Having the same issue, version .9 No amount of clearing data/wipe/reflash/restore will do anything for me either. So much for a lunchtime AOKP update...
I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP
I flashed with the same version of cwm I had previously before this issue (6.0.28). It seems to be an issue with 6.0.29 if so many people have this same issue.
Sent from my SAMSUNG-SGH-I747 using xda premium
xBeerdroiDx said:
I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP
Click to expand...
Click to collapse
I flashed the CMW-recovery_ATT-6.0.2.3_zip directly from the external sd card to the phone and the phone is now working. but I did have to reboot phone twice. the first time it stayed in recovery.
THANK YOU!!
xBeerdroiDx said:
I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP
Click to expand...
Click to collapse
I believe this can even be simplified a bit more. At least for me, some people may find Odin to be the simple way to do things. So you're stuck at recovery:
Hold the power button for 10 seconds to power off.
Boot to download mode by holding volume down and home. The phone will probably start to boot right away after releasing the power button. If it doesn't go to download, then your timing is off, try again.
Hold the power button for 10 seconds to power off and reboot.
It should boot regularly now.
Flash a new recovery. You can download CWM 6.0.2.8 or use this as an opportunity to move to TWRP. Once you have the img file on your phone, go to a terminal and (after su, if needed) run dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (replace "/sdcard/recovery.img" with the path and name of the img file you downloaded. You can also flash the recovery using whatever other on-phone method you prefer.
The CWM download page is now showing that 6.0.2.8 is the newest version for many of the S3 variants, so they've certainly noticed the bug.
J M L said:
I believe this can even be simplified a bit more. At least for me, some people may find Odin to be the simple way to do things. So you're stuck at recovery:
Hold the power button for 10 seconds to power off.
Boot to download mode by holding volume down and home. The phone will probably start to boot right away after releasing the power button. If it doesn't go to download, then your timing is off, try again.
Hold the power button for 10 seconds to power off and reboot.
It should boot regularly now.
Flash a new recovery. You can download CWM 6.0.2.8 or use this as an opportunity to move to TWRP. Once you have the img file on your phone, go to a terminal and (after su, if needed) run dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (replace "/sdcard/recovery.img" with the path and name of the img file you downloaded. You can also flash the recovery using whatever other on-phone method you prefer.
The CWM download page is now showing that 6.0.2.8 is the newest version for many of the S3 variants, so they've certainly noticed the bug.
Click to expand...
Click to collapse
How is this simpler? There are left out bits and errors all through your instructions. My steps were for odin so I'm not sure why you thought they were not.
Hi,
This may be a stupid question but I'm new to Samsung phones so I don't know all the details (I've only been using HTC so far).
So I've followed all the steps and got root fine. However, I tried to reboot into recovery afterwards and it's like Clockworkmod has vanished.... It just gets into what looks to me like the stock recovery. Am I doing something wrong or does the phone automatically restore its stock recovery???
Also, can someone explain to me if it is possible to manually flash a recovery from the img file using fastboot like you do on HTC phones?
Oh, and another thing. What's this Odin thing? I never used anything like that with HTC...
Thanks
ovimunt said:
Hi,
This may be a stupid question but I'm new to Samsung phones so I don't know all the details (I've only been using HTC so far).
So I've followed all the steps and got root fine. However, I tried to reboot into recovery afterwards and it's like Clockworkmod has vanished.... It just gets into what looks to me like the stock recovery. Am I doing something wrong or does the phone automatically restore its stock recovery???
Also, can someone explain to me if it is possible to manually flash a recovery from the img file using fastboot like you do on HTC phones?
Oh, and another thing. What's this Odin thing? I never used anything like that with HTC...
Thanks
Click to expand...
Click to collapse
May I ask what variant you are using? GT-i9195?
Then please boot your phone into download mode, this can be done by first switching of your phone completely then holding the power button, home button and volume down button until the download screen appears where you press continue. Once you have done that connect your phone using the usb cable and make sure all drivers have been installed! Once the drivers are installed start up Odin uncheck the f.rest time box and click the AP section and then select the recovery file provided by Sir Arco in the root thread.
If you need more help please ask, If it worked then still reply
Odin is the software used to flash files to Samsung phones.
You will need to catch the first recovery boot after flashing the recovery image, or else the stock recovery will be reflashed once the phone boots up. Just reflash the recovery via Odin and make sure to boot into recovery right after the phone reboots after the flash.
Whosat said:
Odin is the software used to flash files to Samsung phones.
You will need to catch the first recovery boot after flashing the recovery image, or else the stock recovery will be reflashed once the phone boots up. Just reflash the recovery via Odin and make sure to boot into recovery right after the phone reboots after the flash.
Click to expand...
Click to collapse
Thanks for the response. Yeah, I kind of realized that's what's happening. I've managed to boot into the custom recovery right after the flash and did what I had to do in there, but then after I reboot the phone again, the custom recovery is gone. Is there a way to stop stock recovery being reflashed automatically?
Also, if I want to install a custom kernel, how can I backup the current one so that I can restore it at a later date if I need to? I know how to do this on HTC phones but it all seems to be a bit different on Samsung and I don't want to mess up anything.
How did you reboot? If you select the reboot option in the CWM recovery,it should follow with a question on whether you want to continue rebooting with reverting to stock recovery or not.
Whosat said:
How did you reboot? If you select the reboot option in the CWM recovery,it should follow with a question on whether you want to continue rebooting with reverting to stock recovery or not.
Click to expand...
Click to collapse
Umm... yeah, I think it did ask but I just accidentally pressed no before reading what it said... So I guess I'll just have to flash the recovery again and then answer yes to that question.
Thanks
Yes that would be the correct way to do it.
Hope all goes well!
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
korarchaeota said:
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
Click to expand...
Click to collapse
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Thank you for your reply. Where did you obtain a rom that could boot from the external sd card?
wrenhal said:
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Click to expand...
Click to collapse
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
shortydoggg said:
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried it with only F. Reset Time checked, it installs it and says a green Pass!. I then unplugged it, tried to hold volume up + menu + power buttons for a while but nothing happened. I pulled the battery and then did volume up + menu + power buttons and went straight back to dead android guy. Any ideas?
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
shortydoggg said:
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
korarchaeota said:
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
Click to expand...
Click to collapse
No there's no Odin flash-able there.
Sorry, we don't seem to have any answers for your problem. It seems like it may be more of a hardware issue than software.
Did you phone boot after flashing stock 4.04?
audit13 said:
Did you phone boot after flashing stock 4.04?
Click to expand...
Click to collapse
Yes it did, the first time that this started happening. But I was unable to do that again, I thought since I flashed all the way to 4.3 and I read that once you go to 4.3 you can't go back. Is that correct?
Thank you for your help. I was hoping to try an odin flashable touchwiz 4.3 but I can't seem to find one.
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
audit13 said:
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
korarchaeota said:
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
Click to expand...
Click to collapse
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
audit13 said:
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
Click to expand...
Click to collapse
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
korarchaeota said:
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
Click to expand...
Click to collapse
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
audit13 said:
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
Click to expand...
Click to collapse
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
korarchaeota said:
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
Click to expand...
Click to collapse
Nope, USB debugging will not make a difference.
The latest Philz Touch is based on the latest CWM. After your flash Philz, are you letting the phone auto reboot on its own after flashing in Odin?
I know of no way to convert a custom ROM so it can be flashed in Odin.
So today i was gonna try to install a custom rom, more specifically Cyanogenmod 10.2. for my Tmobile Galaxy S3 (SGH-T999). When i went to boot into recovery, i saw the screen that is displayed right before you enter recovery, but then after that it just stayed on a black screen. I took out the battery for a few seconds and powered on my phone. Then i tried entering recovery directly through ROM Manager. I got the same black screen, but now if i try to power on my phone without entering CWM, it automatically tries to go into CWM recovery regardless. . I tried a few battery pulls and nothing has worked yet. Luckily i am able to enter download mode so i can flash the stock rom via odin and then restore my backup from the SD card later. I just wanted to know if there is a simpler fix than this so i don't have to go through the trouble of flashing stock rom again. Btw i am still on the stock rom running android 4.3 jelly bean.
Try flashing custom recovery again and make sure it's the newest.
serio22 said:
Try flashing custom recovery again and make sure it's the newest.
Click to expand...
Click to collapse
The problem was i couldn't boot up my phone in the first place because it would automatically go into recovery. I actually fixed it by going it to download mode and then pressing the down button which rebooted the phone properly. I used rom toolbox and now im just gonna stick with TWRP.
RootNoob1299 said:
The problem was i couldn't boot up my phone in the first place because it would automatically go into recovery. I actually fixed it by going it to download mode and then pressing the down button which rebooted the phone properly. I used rom toolbox and now im just gonna stick with TWRP.
Click to expand...
Click to collapse
That's what I meant, you can flash recovery in download mode but as long as you got it working its all good. And yes I highly suggest using twrp over cwm
Thanks anyway man! TWR FTW!!