I just got my new Galaxy Note II N7105 (LTE version), and because custom recovery is first on my to-do list, I'm curious what recovery everyone is using and why. I've found the official CWM/CWM touch, but no thread about TWRP.
PS: Where can I download the right version of odin if I going flash the CWM .img?
Regards,
X-zone
This is advanced cwm for note 2
Phliz touch.
On link there zip files to flash with custom recovery. Also tar files to flash with odin
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
Search for odin 3.09 on forum its last version now
X-zone said:
I just got my new Galaxy Note II N7105 (LTE version), and because custom recovery is first on my to-do list, I'm curious what recovery everyone is using and why. I've found the official CWM/CWM touch, but no thread about TWRP.
PS: Where can I download the right version of odin if I going flash the CWM .img?
Regards,
X-zone
Click to expand...
Click to collapse
husokal said:
This is advanced cwm for note 2
Phliz touch.
On link there zip files to flash with custom recovery. Also tar files to flash with odin
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
Search for odin 3.09 on forum its last version now
Click to expand...
Click to collapse
Correct me if i am wrong but isn't the link that you provided only for N7100 and he has a N7105(LTE)edition and he should be using this version instead http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lte ?
singhpratik87 said:
Correct me if i am wrong but isn't the link that you provided only for N7100 and he has a N7105(LTE)edition and he should be using this version instead http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lte ?
Click to expand...
Click to collapse
That's right, thanks! :laugh:
Anyone who have been using TWRP?
X-zone said:
That's right, thanks! :laugh:
Anyone who have been using TWRP?
Click to expand...
Click to collapse
I have note II GT N7100 but i've used both philz (cwm advanced) and twrp ,here's the link to twrp for your lte note 2 http://teamw.in/project/twrp2/125
Oh youre right. I misread the model. Sorry about that
singhpratik87 said:
I have note II GT N7100 but i've used both philz (cwm advanced) and twrp ,here's the link to twrp for your lte note 2 http://teamw.in/project/twrp2/125
Click to expand...
Click to collapse
Which one do you prefer?
X-zone said:
Which one do you prefer?
Click to expand...
Click to collapse
i started off Philz but been going back and forth between philz and twrp cause at times certain ROMs refuse to boot up with either of the recoveries. Also philz at times has issues with running aroma mods ,so i switch to twrp flash what i need and go back to philz so it's a matter of preference and what the situation demands.So if i were you i'd have both saved on external sd card and just use either of them if encounter issue with the other one
---------- Post added at 05:53 PM ---------- Previous post was at 05:51 PM ----------
husokal said:
Oh youre right. I misread the model. Sorry about that
Click to expand...
Click to collapse
Yes please next time read carefully what the person is asking cause flashing the recovery from another model could brick your device,it happens with all of us but precaution should be taken
singhpratik87 said:
i started off Philz but been going back and forth between philz and twrp cause at times certain ROMs refuse to boot up with either of the recoveries. Also philz at times has issues with running aroma mods ,so i switch to twrp flash what i need and go back to philz so it's a matter of preference and what the situation demands.So if i were you i'd have both saved on external sd card and just use either of them if encounter issue with the other one
---------- Post added at 05:53 PM ---------- Previous post was at 05:51 PM ----------
Yes please next time read carefully what the person is asking cause flashing the recovery from another model could brick your device,it happens with all of us but precaution should be taken
Click to expand...
Click to collapse
Thanks for the info! Do you think the issues that you encountered with philz affects the official CWM too?
X-zone said:
Thanks for the info! Do you think the issues that you encountered with philz affects the official CWM too?
Click to expand...
Click to collapse
Rarely people use the official CWM ,most of us on this thread are on philz or twrp,and no one actually suggests to flash CWM.
singhpratik87 said:
Rarely people use the official CWM ,most of us on this thread are on philz or twrp,and no one actually suggests to flash CWM.
Click to expand...
Click to collapse
Super thanks for the info. By the way, do you happen to have a download link to a ODIN version that's stable?
X-zone said:
Super thanks for the info. By the way, do you happen to have a download link to a ODIN version that's stable?
Click to expand...
Click to collapse
http://www.mediafire.com/download/b8w1on8pwd11yby/Odin+v3.09.zip
singhpratik87 said:
http://www.mediafire.com/download/b8w1on8pwd11yby/Odin+v3.09.zip
Click to expand...
Click to collapse
Thanks! I have now flashed Philz, but I have one question. When you're suppose to enter recovery mode, I've read that you're suppose to press Power + Menu + volume Up simultaneously until you enter recovery. But when I do that I only get a loop: Samsung galaxy Note 2 --> Black screen --> Samsung galaxy Note 2, etc etc. But when i release the power button I enter the recovery. Is this normal?
X-zone said:
Thanks! I have now flashed Philz, but I have one question. When you're suppose to enter recovery mode, I've read that you're suppose to press Power + Menu + volume Up simultaneously until you enter recovery. But when I do that I only get a loop: Samsung galaxy Note 2 --> Black screen --> Samsung galaxy Note 2, etc etc. But when i release the power button I enter the recovery. Is this normal?
Click to expand...
Click to collapse
Press them simultaneously and let go of all 3 buttons when you see samsung note 2 logo if you keep them pressed even after seeing the logo phone will bootloop
PhilZ Touch 6.29.9
Related
I have a t-mobile Galaxy s4 that is rooted and uses TWRP 2.6.3.0. The recovery keeps hanging at the Teamwin Blue screen. I downloaded the flashable TWRP 2.5 which is said to be more stable so can I just flash this with Goo Manager or will I have to remove the TWRP 2.6.3.0 first. If so how can I downgrade
Just flash in twrp like you would a Rom but don't do any wipes
No Boot into revcovery
I flashed the TWRP but when I try to go into recovery it opens to the Samsung screen with the blue writing and then it turns off, vibrates twice and boots normally. I did not wipe as you instructed
josephh71 said:
I flashed the TWRP but when I try to go into recovery it opens to the Samsung screen with the blue writing and then it turns off, vibrates twice and boots normally. I did not wipe as you instructed
Click to expand...
Click to collapse
Download 2.5.0.2 version tar here http://www.teamw.in/project/twrp2 click on Get TWRP for your device and type s4 and click on T-Mobile version jfltetmo, you should flash it through Odin. Whenever you flash another recovery to your phone, it replaces the older recovery.
Where did you get the 2.5 twrp? I flash between different versions of twrp and cwm often.
Here is the post for twrp 2.5.0.2 zip also. http://forum.xda-developers.com/showpost.php?p=43469920
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
jd1639 said:
Where did you get the 2.5 twrp? I flash between different versions of twrp and cwm often.
Click to expand...
Click to collapse
SERIOUSLY?!?!
I just explained to you in the post, did I just waste my time? You can get it by yourself in the future by following my instructions, ANY version, tar or img is on their site.
josephh71 said:
I flashed the TWRP but when I try to go into recovery it opens to the Samsung screen with the blue writing and then it turns off, vibrates twice and boots normally. I did not wipe as you instructed
Click to expand...
Click to collapse
Some people have huge issues with TWRP I know I did. You might want to flash CWM touch. I did and haven't had a problem since. You can easily download and flash from Rom manager. You can get that from play store. It will give you latest version of cwm touch. Easily. It should solve your recovery problems.i know it solved mine. Don't know why some can use twrp and others have nothing but problems with it. I know I couldn't use it.i needed a stable recovery and twrp was NOT stable for me. CWM touch had never given me a problem once..it might be time to give CWM touch a try...it worked out really great for me.
norml said:
Here is the post for twrp 2.5.0.2 zip also. http://forum.xda-developers.com/showpost.php?p=43469920
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
SERIOUSLY?!?!
I just explained to you in the post, did I just waste my time? You can get it by yourself in the future by following my instructions, ANY version, tar or img is on their site.
Click to expand...
Click to collapse
What? that was meant for the op
jd1639 said:
What? that was meant for the op
Click to expand...
Click to collapse
Why don't you use features like "reply , like you just did by quoting me, or is this a special thread for just you two? San Fransisco thing going on here, LOL? You can just ask any question and everyone automatically knows who it is directed to?
norml said:
Why don't you use features like "reply , like you just did by quoting me, or is this a special thread for just you two? San Fransisco thing going on here, LOL? You can just ask any question and everyone automatically knows who it is directed to?
Click to expand...
Click to collapse
You snuck you post in on me while I was writing lol. No worries
jd1639 said:
You snuck you post in on me while I was writing lol. No worries
Click to expand...
Click to collapse
If you two want to be alone, hey, to each their own. JK
Working great!
Thanks for the update. I finally got it installed and working. I really appreciate your help
Thank you
thanks for all the help. I finally got it working. I initially got the dl from another link in the help section but when I flashed it I couldnt get into recover so I just followed the instructions and now it works.
Alright. This was very confusing to identify why this was happening, but I managed to pin point the steps which caused it to happen.
I am running 4.4 Kit Kat firmware, I also just recently rooted the phone through CF Autoroot. The next move I wanted to make was to install the CynogenMod ROM, but I did not have a custom recovery installed yet. After downloading the ROM manager app, I installed/flashed CWM and the app read that I had it as my set recovery, so I could check that off the list.
However when I try to boot the phone into recovery mode CWM does not appear at all, but instead the android logo appears with three lines of words that read:
Recovery Booting
Recovery is not Seandroid enforcing
Set warranty bit: recovery
The screen remains like this for a couple of seconds, then shuts off, then repeats. The only way I have been able to fix it is by flashing the stock firmware again through Odin, then rooting the phone the same way I did previously. It seems that setting my recovery to CWM in ROM manager is the cause of this problem, but why? Should I install CWM through other means? Is it ROM manager?
Any advice would be great!
Thanks!
WeezyWombat said:
Alright. This was very confusing to identify why this was happening, but I managed to pin point the steps which caused it to happen.
I am running 4.4 Kit Kat firmware, I also just recently rooted the phone through CF Autoroot. The next move I wanted to make was to install the CynogenMod ROM, but I did not have a custom recovery installed yet. After downloading the ROM manager app, I installed/flashed CWM and the app read that I had it as my set recovery, so I could check that off the list.
However when I try to boot the phone into recovery mode CWM does not appear at all, but instead the android logo appears with three lines of words that read:
Recovery Booting
Recovery is not Seandroid enforcing
Set warranty bit: recovery
The screen remains like this for a couple of seconds, then shuts off, then repeats. The only way I have been able to fix it is by flashing the stock firmware again through Odin, then rooting the phone the same way I did previously. It seems that setting my recovery to CWM in ROM manager is the cause of this problem, but why? Should I install CWM through other means? Is it ROM manager?
Any advice would be great!
Thanks!
Click to expand...
Click to collapse
What recovery version are u flashing
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
WeezyWombat said:
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
Wrong recovery you need to find philz cwm.
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
---------- Post added at 07:01 AM ---------- Previous post was at 07:00 AM ----------
http://forum.xda-developers.com/showthread.php?t=2595995
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
Click to expand...
Click to collapse
BACARDILIMON said:
WeezyWombat said:
Wrong recovery you need to find philz cwm.
Do I flash that version through Odin?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
WeezyWombat said:
BACARDILIMON said:
WeezyWombat said:
Wrong recovery you need to find philz cwm.
Do I flash that version through Odin?
Click to expand...
Click to collapse
Follow the guidelines they set. Some have done it other ways and been OK some have not. Always best to follow op advice
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.
dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.
Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.
Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.
Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.
Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.
hi
i just found my old samsung GT-S5660M but i cannot remember the pattern code, so i boot in recovery mode to wipe data but here's the problem: my volume button is not working. i cannot navigate the menu at all.
so my question is, how can i wipe data/factory reset my phone without the volume button
the phone is not rooted and the stock recovery is insalled
thanks
PX
skfunnyboy said:
hi
i just found my old samsung GT-S5660M but i cannot remember the schema code, so i boot in recovery mode to wipe data but here's the problem: my volume button is not working. i cannot navigate the menu at all.
so my question is, how can i wipe data/factory reset my phone without the volume button
the phone is not rooted and the stock recovery is insalled
thanks
Click to expand...
Click to collapse
PX Recovery is what you need but i am not sure how you will flash px recovery without working volume button
P.S: Can You access Download mode, is your volume + button working?
waqaswasil said:
PX Recovery is what you need but i am not sure how you will flash px recovery without working volume button
P.S: Can You access Download mode, is your volume + button working?
Click to expand...
Click to collapse
no, , i think the up volume button is broke too
skfunnyboy said:
no, , i think the up volume button is broke too
Click to expand...
Click to collapse
can you use adb to reboot into download mode?
waqaswasil said:
can you use adb to reboot into download mode?
Click to expand...
Click to collapse
yeah i can i tried to flash the stock rom using odin but when the phone started back, the pattern code was still there
skfunnyboy said:
yeah i can i tried to flash the stock rom using odin but when the phone started back, the pattern code was still there
Click to expand...
Click to collapse
i have an odin flashable tar for twrp, wait till tomorrow so i can upload it for you as i dont have access to my pc right now
waqaswasil said:
i have an odin flashable tar for twrp, wait till tomorrow so i can upload it for you as i dont have access to my pc right now
Click to expand...
Click to collapse
that would be awesome, ill wait for you to upload it
thanks
LINK
skfunnyboy said:
that would be awesome, ill wait for you to upload it
thanks
Click to expand...
Click to collapse
OK, so here's the link:
http://d-h.st/qL2
:highfive:
All Credits To: @konstantin12 For Compiling Stable TWRP For Gio
Yiiiiiiiiiis :d
waqaswasil said:
OK, so here's the link:
(snip)
:highfive:
All Credits To: @konstantin12 For Compiling Stable TWRP For Gio
Click to expand...
Click to collapse
Thank you so much, it worked at first i thought it would brick the phone because of the model difference (GT-S5660 - GT-S5660M) but it worked !
Feeling Happy For Helping Someone!!!
skfunnyboy said:
Thank you so much, it worked at first i thought it would brick the phone because of the model difference (GT-S5660 - GT-S5660M) but it worked !
Click to expand...
Click to collapse
Now that you've got the recovery working, you can try any other touch based recovery like PhilZ Recovery or PX Recovery and don't use stock ROM as custom ROMs are faster than stock ROM, now that you've got a custom recovery, it wouldn't be so difficult for you. :laugh: :highfive: :fingers-crossed:
But first confirm that the recovery or ROM you are going to flash will work with Canadian Gio (GT-5660M) or not or you will have to use ODIN again.
If You Want to Keep TWRP, you can flash the updated version (Released Yesterday) from your current recovery from here:
http://forum.xda-developers.com/showthread.php?t=2728689
as the version you currently have is one year old.
waqaswasil said:
Now that you've got the recovery working, you can try any other touch based recovery like PhilZ Recovery or PX Recovery and don't use stock ROM as custom ROMs are faster than stock ROM, now that you've got a custom recovery, it wouldn't be so difficult for you. :laugh: :highfive: :fingers-crossed:
But first confirm that the recovery or ROM you are going to flash will work with Canadian Gio (GT-5660M) or not or you will have to use ODIN again.
If You Want to Keep TWRP, you can flash the updated version (Released Yesterday) from your current recovery from here:
http://forum.xda-developers.com/showthread.php?t=2728689
as the version you currently have is one year old.
Click to expand...
Click to collapse
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
skfunnyboy said:
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
Click to expand...
Click to collapse
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
waqaswasil said:
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
Click to expand...
Click to collapse
does philz touch recovery supports rfs and ext4?
kaiserlourdes said:
does philz touch recovery supports rfs and ext4?
Click to expand...
Click to collapse
i don't know because I have not tried it on stock rom (RFS Based) but I have a strong feeling that it will work!
Maybe @Bhargav97 or @belyava can help you!!!
skfunnyboy said:
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
Click to expand...
Click to collapse
waqaswasil said:
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
Click to expand...
Click to collapse
There's a stable and fully working version of TWRP released. DL in my signature
waqaswasil said:
i don't know because I have not tried it on stock rom (RFS Based) but I have a strong feeling that it will work
Click to expand...
Click to collapse
No it won't! No custom recovery does support the rfs pertition!
belyava said:
No it won't! No custom recovery does support the rfs pertition!
Click to expand...
Click to collapse
@belyava no offence but I think you are wrong here (maybe I am ) @kaiserlourdes I Think You Should Try It as it will do NO HARM and you can always revert back to your current recovery by odin or terminal method
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
belyava said:
There's a stable and fully working version of TWRP released. DL in my signature
Click to expand...
Click to collapse
YUP! I Noticed That. You Are Cool DUDE!
Thanks!
waqaswasil said:
@belyava no offence but I think you are wrong here (maybe I am ) @kaiserlourdes I Think You Should Try It as it will do NO HARM and you can always revert back to your current recovery by odin or terminal method
Click to expand...
Click to collapse
Could you name me a flashable ctock rom that has rfs partition, not ext?
waqaswasil said:
YUP! I Noticed That. You Are Cool DUDE!
Thanks!
Click to expand...
Click to collapse
You're welcome
belyava said:
Could you name me a flashable ctock rom that has rfs partition, not ext?
Click to expand...
Click to collapse
But there is a CWM Recovery by phiexz that supports Both RFS and EXT4!
waqaswasil said:
But there is a CWM Recovery by phiexz that supports Both RFS and EXT4!
Click to expand...
Click to collapse
yes, you are right, it does exist! But! it is able only to backup/restore stock roms. It could flash ext-based roms, but not rfs-roms, only odin can
belyava said:
yes, you are right, it does exist! But! it is able only to backup/restore stock roms. It could flash ext-based roms, but not rfs-roms, only odin can
Click to expand...
Click to collapse
That's what @kaiserlourdes meant (to backup/restore stock rom).
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
.Hell. said:
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
Click to expand...
Click to collapse
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
ceomaverick said:
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
Click to expand...
Click to collapse
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
.Hell. said:
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
Click to expand...
Click to collapse
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
ceomaverick said:
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
Click to expand...
Click to collapse
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
.Hell. said:
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
Click to expand...
Click to collapse
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
ceomaverick said:
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
Click to expand...
Click to collapse
Hello , Yes my device is N7100 and i am currently on 4.3 Jellybean and i have tried your recovery file with no success still i don't know why D=
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
gb61 said:
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
Click to expand...
Click to collapse
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
.Hell. said:
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
Click to expand...
Click to collapse
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
gb61 said:
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
Click to expand...
Click to collapse
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
.Hell. said:
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
A custom recovery is necessary to install a custom rom but you can rooted your phone with Odin PC and CF-Auto-Root-t03g-t03gxx-gtn7100.zip
For example there is an explanation here :http://www.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.
You can find others in google with search "how to root samsung galaxy note 2" .
The most important before installing is to copy your important folder to your PC.
I hope that can help you.
Excuse me for my english
---------- Post added at 05:01 PM ---------- Previous post was at 04:53 PM ----------
Other link in XDA it's seems more clear : http://forum.xda-developers.com/showthread.php?t=2143479
Okay guys i have installed Root on my phone using these two threads
http://forum.xda-developers.com/showthread.php?t=2143479
http://forum.xda-developers.com/showthread.php?t=2618261
Now what i should do actually because my problem still remain , that i cant install CWM and it keep reboot into Android not Recovery and i have tried all the methods but nothing works for me so far still
Okay guys thank you for your help , and for anyone who have my problem i used mobile odin to flash CWM