[Q] i8160 ace2 can,t flash any file - Galaxy Ace II Q&A, Help & Troubleshooting

hi there
I have i8160 in semidead state it turns on and hangs at samung i8160 logo i can enter download mode but cant enter in revocery moce my friend gave it to me in this state i dont know story how it happened r anything
I tired flashing 4.1.2 with odin 3.0.4 and 3.0.7 and it fails
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160XXMC8_I8160TMNMC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> kernel.bin.md5
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
tried with seb russian rom 2.3.6 gb and again it fails at set partition
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar.md5 is valid.
<OSM> CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<ID:0/007> Added!!
is there any other way to repair this semidead mobile

Related

[Q] Softbricked GS3 cant flash with Odin

So i soft bricked my phone recently trying to get the latest CWM. I got the stock firmware for Bell, my carrier through Samfirmware and opened Odin 3.07 to flash it onto my phone. Everything is normal but when I click start all i get is this...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
and its stuck there. Any ideas how i can fix this?

[Q] Help Please, Galaxy Note 2

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable
aimlessangel said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable
Click to expand...
Click to collapse
someone help me T_T
mr
aimlessangel said:
someone help me T_T
Click to expand...
Click to collapse
Try use odin v1.85 or odin v3.04
You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum
dr.ketan said:
You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum
Click to expand...
Click to collapse
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing with pit
aimlessangel said:
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sent from my GT-N7100 using xda premium
Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck
rodrigoyasuda said:
Try flashing with pit
what do you mean flashing w/ pit?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
mark.r22 said:
Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck
Click to expand...
Click to collapse
kies is not in background
Use pit file and flash latest 4.1.2 ROM
If your device is 7105, here is thread
http://forum.xda-developers.com/showthread.php?t=2032849

[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

[stock rom][SM-P600][P600UBUCOB1 Country Panama

hallo guys,
i tried to change my region to Country Panama from this link
but i get this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P600UBUCOB1_P600UUBCOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
i tried this pit from this thread
but did't work for me, anyone know why?
my tab information
SM-p600 32gb
android 4.2.2
build: KOT49H.p600XXUCNH3 PHN
no root, everything stock!!

Need help with rooting!

I am trying to root my phone with the help of this: http://forum.xda-developers.com/note-3-neo/general/recovery-root-root-lollipop-note-3-neo-t3265412/
I am stuck at Odin itself.
This is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried twice and same problem. What to do now?
PS. I'm a noob

Categories

Resources