Develop Bugs

[Q] Only finds AT&T network

PLEASE HELP
My Galaxy Note 2 (SGH-T889) has been flashed with mr Robinson's "root66_TMO_T889UVUCMK7_2.7z" (baseband T889UVUCMK7)
The phone boots fine to version 4.3. I have a T mobile sim card in it
Device info is
Kernel version 3..031-2085660
Build #: JSS15J.T889UVUCMK7
Network mode is set to LTE/WCDMA/GSM (auto connect)
When I search for all available networks i only get AT&T (I need T mobile)
I have another Galaxy Note 2 (SGH-T889) flashed with the same mr Robinson's. Same settings, when I search networks it finds them all (T mobile, AT&T)
Is the phone that only get's AT&T network locked to AT&T? or could there be other reasons (it is an SGH-T889)
I was reading that if you flash T889UVALJ1 (4.1.1) you can unlock the phone (although I don't know if it is locked, how can you find out?)
I tried loading it but I think the 4.3 boot loader stopped it from working.
Should I get a custom boot loader on the phone? is so how do I do this (I read something about goo manager?)
Please provide details as I am a newbie.
is there something else I should be looking at or doing?

oldfart001 said:
PLEASE HELP
My Galaxy Note 2 (SGH-T889) has been flashed with mr Robinson's "root66_TMO_T889UVUCMK7_2.7z" (baseband T889UVUCMK7)
The phone boots fine to version 4.3. I have a T mobile sim card in it
Device info is
Kernel version 3..031-2085660
Build #: JSS15J.T889UVUCMK7
Network mode is set to LTE/WCDMA/GSM (auto connect)
When I search for all available networks i only get AT&T (I need T mobile)
I have another Galaxy Note 2 (SGH-T889) flashed with the same mr Robinson's. Same settings, when I search networks it finds them all (T mobile, AT&T)
Is the phone that only get's AT&T network locked to AT&T? or could there be other reasons (it is an SGH-T889)
I was reading that if you flash T889UVALJ1 (4.1.1) you can unlock the phone (although I don't know if it is locked, how can you find out?)
I tried loading it but I think the 4.3 boot loader stopped it from working.
Should I get a custom boot loader on the phone? is so how do I do this (I read something about goo manager?)
Please provide details as I am a newbie.
is there something else I should be looking at or doing?
Click to expand...
Click to collapse
If it were an att note 2 it would not be the SGH-T889 it would be i317. What does your APN settings show? if you are on the 4.3 bootloader I don't think you can use odin to go back to uvalj1. if you want to unlock I have heard of people only flashing the uvalj1 modem and having success. Custom bootloader? Do you mean custom recovery? you can download that from goo manager. Do you not have a recovery installed (CWM, TWRP)?

mattlowry said:
If it were an att note 2 it would not be the SGH-T889 it would be i317. What does your APN settings show? if you are on the 4.3 bootloader I don't think you can use odin to go back to uvalj1. if you want to unlock I have heard of people only flashing the uvalj1 modem and having success. Custom bootloader? Do you mean custom recovery? you can download that from goo manager. Do you not have a recovery installed (CWM, TWRP)?
Click to expand...
Click to collapse
APN = T-Mobile US LTE fast.t-mobile.com
I do not have a recovery installed (only Note 2 standard recovery?)
How would I download custom recovery from goo manager?
Can you lock an SGH-T889 to AT&T? (if so, how do I flash uvalj1 modem(?
Could anything else be causing it to only recognize AT&T network (and not T-mobile)?

oldfart001 said:
APN = T-Mobile US LTE fast.t-mobile.com
I do not have a recovery installed (only Note 2 standard recovery?)
How would I download custom recovery from goo manager?
Can you lock an SGH-T889 to AT&T? (if so, how do I flash uvalj1 modem(?
Could anything else be causing it to only recognize AT&T network (and not T-mobile)?
Click to expand...
Click to collapse
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically. source: http://teamw.in/project/twrp2/123
once you have the recovery you can flash the modem
I have not heard of locking a tmobile phone to att but I could be wrong. Are you not getting service at all?

mattlowry said:
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically. source: http://teamw.in/project/twrp2/123
once you have the recovery you can flash the modem
I have not heard of locking a tmobile phone to att but I could be wrong. Are you not getting service at all?
Click to expand...
Click to collapse
Since AT&T is the only network recognized and I have t-mobile service I have no voice or data service on this phone. My other SGH-T899 which is flashed exactly the exact same recognizes other networks as well as AT&T

oldfart001 said:
Since AT&T is the only network recognized and I have t-mobile service I have no voice or data service on this phone. My other SGH-T899 which is flashed exactly the exact same recognizes other networks as well as AT&T
Click to expand...
Click to collapse
Not to be goofy, what is the model number printed on the sticker under the battery?
When you boot into download mode, what model does it show on the screen?
Edit:
Go into the dialer. Dial *#2263# and tell us what setting the asterisk is next to, automatic is the preferred one. Check and see if you can tell which bands are selected in the various GSM/WCDMA/LTE selections. I don't think you can, but it couldn't hurt to look.
Hastily spouted for your befuddlement

Coug76 said:
Not to be goofy, what is the model number printed on the sticker under the battery?
When you boot into download mode, what model does it show on the screen?
Edit:
Go into the dialer. Dial *#2263# and tell us what setting the asterisk is next to, automatic is the preferred one. Check and see if you can tell which bands are selected in the various GSM/WCDMA/LTE selections. I don't think you can, but it couldn't hurt to look.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
Model number under battery is SGH-T889. Service mode is automatic

Experiences SIM unlocking SGH-I747 (Galaxy S III) AT&T 4.3 with codes

Has any one had positive experiences with SIM unlocking the AT&T sgh-i747 (Galaxy S III) after the 4.3 update with a code??
I paid $14.99 to SamMobile to unlock using their software but it didn't work and they don't answer my emails. But that's not with a code
Admins: if there is a thread for this already, please point me to it. I could not find one with successes after the 4.3 update
Note that AT&T didn't want to give me a code: I had cancelled the service already and paid the ETF (foolish, I know), and now they don't care about me

I've seen plenty if users have success unlocking with a code. I don't know about how sammobile does it though.
You have to be stock for it to work BTW.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

Thanks doc. By "stock" you mean the official ROM without root? As I said, it's not the original version (4.1.1) but the OTA update to 4.1.3 by AT&T
I will have to buy some code

Root doesn't matter. Many custom stock based ROMs will also work but some may have removed some needed files which is why I just said stock. As long as its stock based and has the stock dialer it should work though.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

So, no one has any experience to share? has anyone unlocked a Galaxy S III 4.3 with a code? It's OK if you prefer to PM that info to avoid being interpreted as advertising

Official AT&T Unlock Code Fails
My contract ended id-September so I requested an unlock code, which was previded (below). I sent two separate requests for the unlock code and the number provided twice matches. I tried the unlock code (while using a T-Mobile SIM card) twice and the phone said the code was incorrect.
I prepared the phone by doing a factory reset. These are the phone details:
Model number
Samsung-SGH-I747 running
Android version
4.4.2
baseband
I747UCUFNE4
kernel
3.4.0-1514807
[email protected] #1
Mon May 19 21:00:05 KST 2014
Build number
KOT49H.I747UCUFNE4
These are the instructions provided:by AT&T:
Thank you for contacting AT&T Customer Care about unlocking your AT&T Mobile device. We have reviewed your request and confirmed that the device may be unlocked. You should complete the unlock process before porting out your number for use with another carrier. Please allow 24 hours upon receipt of this notification to complete the unlock process.
Your Unlock Code is :12345678
Unlock Steps - Use Non-AT&T SIM Card
1. Power off the device and insert a non-AT&T SIM card.
2. Power on the device.
3. Network Lock displays: Enter the device unlock code.
4. Enter the eight-digit unlock code.
5. Press OK.
Note: You are allowed five attempts to unlock before your device permanently locks to the AT&T network. Note: If your device has been altered from the original manufacturer's standards, such as rooting the device, your unlock code may not work and you will need to contact the original manufacturer for assistance.
For questions regarding AT&T Mobile device, please visit the Phone/Device Learning Center. Thank you for your business. For other questions about our AT&T wireless service or other Mobile devices, please visit att.com.
I've tried the unlock twice and it did not work. The phone is rooted. I think I manually installed 4.4.2 because the OTA failed many time to update.
I think these instructions are confusing in that step 3 and step 4 both say enter the unlock code. Is there a second code? I thought an phone unlock code is a single 8-digit number.
I have successfully unlocked an old HTC Aria so I have a little bit of experience performing unlocks. But if you have advice I'd appreciate hearing your thought.

wpscully said:
My contract ended id-September so I requested an unlock code, which was previded (below). I sent two separate requests for the unlock code and the number provided twice matches. I tried the unlock code (while using a T-Mobile SIM card) twice and the phone said the code was incorrect.
I prepared the phone by doing a factory reset. These are the phone details:
Model number
Samsung-SGH-I747 running
Android version
4.4.2
baseband
I747UCUFNE4
kernel
3.4.0-1514807
[email protected] #1
Mon May 19 21:00:05 KST 2014
Build number
KOT49H.I747UCUFNE4
Click to expand...
Click to collapse
Forgive me for asking but is your phone running a stock ATT ROM? Does the imei obtain from the phone match the imei on the label under the battery?

audit13 said:
Forgive me for asking but is your phone running a stock ATT ROM? Does the imei obtain from the phone match the imei on the label under the battery?
Click to expand...
Click to collapse
Yes, the IMIE shown on the label and via About device --> Status are identical. I asked AT&T twice for the unlock code because I thought maybe I sent the wrong code. I'm 99.9% sure the IMIE number I used is correct.
Yes, the flavor of Android installed is the AT&T version. If I recall, in August 2014 I used ODIN to manually install 4.4.2 because the over-the-air update was not working. (The OTA would download but fail to install. I'd wait for two or three days before I could try a second, third, forth... time.) I have also done a reset via Accounts --> Backup and reset. The MicroSD card was erased too, through the reset process. The lock screen, the home screen, all the typical AT&T add-on applications seem to be as they were when I purchased/upgraded the phone two years ago.
4.4.2 is rooted and I have Chainfire's SuperSU v2.00 Pro installed.
I should mention this: When I look at About device --> Status, all the way at the bottom, is "Device status" which shows "Custom". This isn't a setting. I suppose this is why the network unlock code is not working.
I'm not sure what to do next. I can't recall the page on XDA which guided me through the install of 4.4.2. I'll look a little harder because I'm sure I used XDA as my guide for the upgrade. Perhaps I'll try to install a non-root 4.4.2 image.
I never expected that I'd have five and only five tries at network unlock. I've used three tries... I need to make sure the last two work! Any advice is appreciated.

Sorry, I'm out of ideas. All I can suggest is flashing back to completely stock with stock recovery and no root access.

someniceguy said:
Note that AT&T didn't want to give me a code: I had cancelled the service already and paid the ETF (foolish, I know), and now they don't care about me
Click to expand...
Click to collapse
In my case AT&T told me they would not give me a code until I paid off my contract. I would seem they don't care about their former or current customers.
I showed them though, I was still on 4.1.2 and simply donwgraded my modem and used the free unlock method. It's now time to upgrade to kitkat.

@wpscully
Don't know if you still need help, but maybe this would do the trick? I think it's the last post that's describing a different method of getting the unlock code to work.
http://forum.xda-developers.com/showthread.php?p=55677344
Sent from my SAMSUNG-SGH-I747 using Tapatalk

@DocHoliday77, your pointer you mention above has proven invaluable. For the record here is the link I used; http://forum.xda-developers.com/showpost.php?p=55677344&postcount=137 MrBrown72 has a secret code and menu selections which seem to tell my phone to ignore all the customizations I made (root, maybe removing some AT&T bloat) and accept the valid network unlock code AT&T provided when my contract ended. The phone is now working on T-Mobile, rooted still, and none the worse for wear. I also want to thank Audit13 for advice on what not to do, and well as his guiding me so I found the hints that the phone considered itself "custom".
Finally I'll mention that if I had not been able to unlock this phone I never, ever would have selected AT&T as a cell provider. In this process they were professional, respectful, and helpful. T-Mobile didn't get my old line transferred before my AT&T contract ended. AT&T probably could have made clearing up this transfer very hard. But they were kind, understanding and efficient in reinstating my old number briefly so T-Mobile could finish the transfer.
I know others have had trouble with vendors. I wish all companies could understand that being unhelpul or rude is the fastest way to lose a customer for life.

Custom Rom While On Stock KitKat 4.4.2 ?

I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?

Jaii_Versace said:
I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.

Jaii_Versace said:
... I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ?... So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
I concur with @jason2678
I have an AT&T SGS3 (d2att/i747) that is on the NE4 bootloader and modem (4.4.2) and am running CM11 atm. As a matter of fact, none of the CM or AOSP roms since late in 4.4.2 development will run unless you are on one of the 4.4.2 bootloaders (NE4, NJ1, NJ2)
What you stated, quoted above, is true for the Verizon SGS3 (d2vzw/i535).

jason2678 said:
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.
Click to expand...
Click to collapse
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks

car2carl said:
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks
Click to expand...
Click to collapse
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.

You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.

dawgdoc said:
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.
Click to expand...
Click to collapse
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Last week I want to use this phone with Tmobile SIM but got Phone Not Allowed MM#6 message . The rom was still 4.3, Contact AT&T and got Unlock code.
but this phone didn't ask for unlock code entry option and still 4.3 , tried the whole weekend with service mode and upgrade to 4.4.2 via CWM recovery.
and still no luck
With your suggestion , it means that I don't have choice to downgrade back to 4.3 rom same with my bootloader and baseband? I heard we can't downgrade if we already in 4.4.2 , is that true?
But I still use stock recovery from CWM.
Before I proceed with replacing with stock recovery, is the stock recovery have to be 4.3 stock recovery or any version for S3? do I need to use odin to change to stock recovery?
if you have good link please help?
Thanks again
---------- Post added at 06:40 AM ---------- Previous post was at 06:33 AM ----------
audit13 said:
You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.
Click to expand...
Click to collapse
Stock dialer means the entire Rom must be replaced to match my bootloader and modem combination or just replace the dialer in my case and still use 4.4.2?
Appreciated if you can help, thanks

Stock dialler requires a stock Samsung kernel.

From what I am seeing, you are on the 4.3 bootloader and modem. As I said before, there are custom TouchWiz 4.4.2 Roms that will run on the 4.3 bootloader and modem. Changing to a 4.3 rom, stock or otherwise, therefore would not be downgrading your bootloader and modem.
What rom are you on?
Some of the custom TouchWiz roms use dialers from the S5, therefore not stock for the S3.
Some of the custom TouchWiz Roms use the stock kernel, some use a custom kernel.
Did you flash a custom kernel?
What is your kernel version? (check under Settings > About Phone)
With the answers to the questions I asked, audit13 and I may be able to give more definite guidance. It could be as simple as flashing the stock kernel and a stock dialer. But, I can't tell at the moment.

car2carl said:
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Click to expand...
Click to collapse
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
audit13, dawgdoc, DocHoliday77
Thank you for your responses , Sorry I couldn't response any sooner as I worked in mountain/forest area that browsing the web is luxury
(yes I remember for sure I have used this cell phone overseas couple times and the way I unlocked through service mode. Way before AT&T OTA update since new)
I have weird situation that make me wondering if I had unlocked my S3 since message
"PHONE NOT ALLOWED MM#6" comes up if I use any other carrier beside AT&T
Per http://forum.xda-developers.com/showthread.php?t=2789917
thanks to OP
I just managed to change my bootloader to I747UCUFNE4 and also my baseband version to I747UCUFNE4
I still keep my CWM 6.0.4.7 recovery touch
I have Flashed with countless other rom such below:
I747UCUFNE4_Stock_Rooted_Odex.zip
I747UCUFNE4_Stock_Rooted_Deodex_3-31-15.zip
I747UCUFNE4_Stock_Rooted_3-31-15.zip
and even custom rom without any success
This was happened with my S3 after flash.
if I flashed with inserted active SIM Card (T Mobile or foreign SIM Card)
I will see PHONE NOT ALLOWED MM#6 after reboot
if I flashed without any SIM Card inserted after reboot :
- inserted foreign sim card and reboot again
I will have AT&T as roaming provider and for about few seconds received text message about fee from SIM issuer roaming to AT&T so means My S3 is unlocked...
(no... not so much!!!) in few minute I will have "PHONE NOT ALLOWED MM#6" and phone is useless as emergency only.
- inserted T-Mobile Sim Card and reboot again it shows "PHONE NOT ALLOWED MM#6" immediately
My Kernel Version :
3.4.0-1514807
[email protected] #1
Mon May 19 21:00:05 KST 2014
Thank you if you can help.

So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.

audit13 said:
So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.
Click to expand...
Click to collapse
No, It doesn't ask at all. just pop up "Phone not allowed MM#6."
my foreign SIM is ok.
I tested on Galaxy Note 4 T-Mo (unlocked) it grabbed ATT roaming,
tested on Iphone 4S (ATT-unlocked) it grabbed Tmobile roaming:laugh:
I just flashed stock recovery and still no go..
do I need to unroot?
Can I flash stock root rom with stock recovery
Thanks

What rom was on the phone when you inserted a foreign sim?
If you are running a Samsung rom, try this:
Www.unlockriver.com/Samsung-unlocking

I am using I747UCUFNE4_Stock_Rooted_3-31-15.zip
I just replaced CWM recovery with UCUFNE4 stock recovery
I did unroot with SuperSU and also
do factory setting through setting menu
basically my phone just as new factory setting but with UCUFNE4
the funny thing is :System Status: Custom is this related I have rooted this device before?
When I turn on bootloader mode (Odin Mode)
product name : SGH-I747
Current Binary: Samsung Official
System Status: Custom
Qualcomm secure boot : enable
warranty bit: 1
bootloader ap Swrev: 3
as I have stated at my 1st post that I had official unlock code from AT&T and got email from them the unlock PIN
but there is no option asking to key in the PIN with other carrier sim inserted .
I have checked also with Swappa esn check
and result is
Blacklisted => Not Indicated
This device does not appear to be globally blacklisted.
spent countless hours just to beat solving this device and read the threads and no result. And still "PHONE NOT ALLOWED MM#6"

need help finding a stock based ROM

Attached is a screenshot of the relevant info about what I'm on now. What I need to know is what stock based ROM can I flash on this device? I need to unlock it for use on T-Mobile, but the unlock code from at&t isn't working. The only method that has worked for other people when it won't take the provided unlock code is to use *#197328640# to turn on the "Perso Sha256" option, then restart the phone and it should accept the unlock code after that.
The problem is, I'm on a slim/AOSP based ROM so the Samsung dialer codes don't work. So I need to know which Samsung based ROM to flash on this device that won't brick it. Not sure what my bootloader version is, but I can check that if necessary. Someone please help!

The free unlock method only works on a stock 4.1.1 dialler, bootloader, and ROM.
Boot into download mode. Do you see anything about Knox or warranty bit? If yes, you can't use the free method and you'll have to buy an unlock code or convince at&t to give you a code for free.

audit13 said:
The free unlock method only works on a stock 4.1.1 dialler, bootloader, and ROM.
Boot into download mode. Do you see anything about Knox or warranty bit? If yes, you can't use the free method and you'll have to buy an unlock code or convince at&t to give you a code for free.
Click to expand...
Click to collapse
You're the second person to misunderstand what I'm asking for lol. I do not want to use the code-less unlock method. I have an unlock code from the carrier. It will not accept the code with Perso Sha256 turned off though, so I need to be able to turn it on so the phone will accept the unlock code from the carrier. CM/AOSP-based roms don't accept samsung dialer codes, so I'm not able to access the menu to turn it on. I'm looking for a stock-based rom that will work with my current baseband so that I can use the samsung dialer codes.

Is the phone a i747 or i747m? It can be confirmed in download mode as it is a very important distinction.

audit13 said:
Is the phone a i747 or i747m? It can be confirmed in download mode as it is a very important distinction.
Click to expand...
Click to collapse
It's i747
Though I solved this on my own and I'm going to mark the thread as solved and provide a link to the ROM I used in case someone else has this issue. Using an old 4.3 version of venom ROM I was able to use the Samsung dialer code to turn Perso Sha256 on and after a reboot, the phone finally accepted the unlock code from at&t and immediately registered to the T-Mobile network with data, voice and SMS working perfectly.

There's enewmans's S3 Rx custom ROM based on the Android 4.4.2 stock ROM.

i747m upgrading checklist

i have an i747m phone on rogers network (locked). it is still on original firmware version, although it is rooted.
i recently flashed lineageos.
since then the sim card is not recognised (no network). i am unsure what the issue IS, but i have been further educating myself for the last four days on this topic and am still unclear on some things. i wonder if you could answer some questions and give a bit of guidance.
here's what i know:
===============
made nandroid backup before upgrading to lineageos
phone worked fine before the update to lineageos
android version was 4.0.4
the bootloader and modem has not to my knowledge been changed since purchase -- i am the original owner.
the phone was rooted shortly after purchase by me
baseband is I747MVLLE8
bootloader is i747MVLALE8
os is now lineageos 14.1-20170828-nightly-d2att
### i can receive calls. phone does not ring, but there is visual notification and i can answer and talk.
### (update) i reinstalled lineageos and now incoming DOES ring. on the screen it says "incoming call via emergency network". i do not see any way to answer the call now, and even after hanging up the initiating call it continues to ring until reboot.
### (update2) i have been able to answer the "incoming call via emergency network" and it seems to connect normally. is this a glitch, or are "incoming emergency calls" a "thing"?
===============
i read that one of the likely reasons is "out of date baseband/modem/bootloader"
here's what i am unsure of:
===============
probable cause of "no sim"
should i upgrade bootloader? if so to what version and how?
should i upgrade modem? if so to what version and how?
anything else that should be updated?
what does "d2att" stand for and represent? is it part of the hardware/model of the phone? e.g. what is the difference between d2att and d2can?
is d2att the correct "thing" for the rogers network in canada for an i747m?
can i use heimdall and the images from sammobile.com to upgrade ONLY the modem and/or bootloader? if so, what files do i use (which one's are which?)?
if i use heimdall to flash the WHOLE sammobile "firmware" what happens? do i need to flash them all incrementally (v4.1, v4.2, v4.3 etc), or can i go from 4.0.4 straight to 4.4.2?
what is the minimum baseband/modem/bootloader that will work with lineageos 14.1 (android 7?)?
what are the drawbacks associated with upgrading the baseband/modem/firmware?
should i flash an older baseband first and try to unlock my sim or is that problematic in other ways?
===============
i am tech savvy and can follow complex instructions. i am not afraid of SOFT bricks as long as there is some way for me to revert. what IS holding me up is the fact that there are no clear directions (that i could find so far) for doing what i am trying to do, no clear indications of what the dangers are (that i could find so far), and (seemingly) conflicting information abounds. i understand (more than ever now) that this is a very complex topic and everything in this realm is unofficial. i would be very grateful if you could bring me up to speed on this topic a bit more, help me to understand things in more depth.
my goal is to update the phone the the newest lineageos (if that is possible and recommended), and to have full functionality. IF lineageos 14.1 is not to my liking, being able to revert to SOMETHING else would be great!
thanks so much!

The phone needs to be running the latest bootloader and modem to run the latest Lineage.
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.

audit13 said:
The phone needs to be running the latest bootloader and modem to run the latest Lineage.
Click to expand...
Click to collapse
ok great to know!
do you know if i can update just the bootloader and modem and if so how? i have the file
I747MVLUFOB3_I747MOYAFOB3_RWC.zip
from sammobile.com (for the i747m rogers) which contains around ten files. which one is the bootloader and which one the modem (or does it work like that?)? there is a post here
ohthehugemanatee <dot> org/blog/2015/04/04/how-and-why-to-update-the-modem-slash-baseband-firmware-on-a-samsung-phone/
that talks about the theory (if not the exact practice for my exact phone) of how to do it. can you verify this would work as demonstrated using heimdall?
is it advised to do any of this with a locked sim? i am on the rogers network and would be flashing files/firmware (presumably) for the rogers network.
audit13 said:
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.
Click to expand...
Click to collapse
since you did not list rogers there does that mean that i would have the d2can then? i used the d2att version of TWRP (as well as lineageos) -- do you think that is going to cause problems?
thanks very much for your reply!

Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.

audit13 said:
Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.
Click to expand...
Click to collapse
cool ok.
do you think i can go straight from 4.0.4 firmware to 4.4.2 (latest i think?)? is it recommended?

It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.

audit13 said:
It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.
Click to expand...
Click to collapse
cool. couple of questions:
1/ do i need to use a sim from a network other than my own (rogers) in order to complete the free unlock? many of the "free unlock" tutorials mention inserting "the new sim" in order to do the unlock.
2/ will this image (rogers 4.1.1) work for getting me the free unlock or do i have to use a pristine one?
https://forum.xda-developers.com/showthread.php?t=1739426
the reason i ask is that sammobile seems to require a premium account to get that older 4.1.1 image.
cheers!

You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.

audit13 said:
You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.
Click to expand...
Click to collapse
when i search for "i747m" on updato.com, the only 4.1.1 firmware they list is
GALAXY S III (Canada) SGH-I747M 4.1.1 December 21, 12 Puerto Rico (PCT) I747MUMBLL1
is that one suitable, being "region/carrier = puerto rico" or do i NEED rogers carrier?

Is your phone still locked to Rogers?

audit13 said:
Is your phone still locked to Rogers?
Click to expand...
Click to collapse
i have not tried the unlock yet (because of the carrier/region question) but yes i believe it is locked to rogers.
i guess i don't really understand what the differences are on my phone -- what they are for.
i believe that the i747 is a different hardware than i474m.
but i don't know if d2att is different HARDWARE than d2can for example.
and the "rogers" part, vs "telus" or "sprint" or whatever. i am guessing that that signifies the PROGRAMMING in the OS or perhaps the FIRMWARE as well -- but not the hardware... but i could be wrong.
when i "unlock" the phone from rogers network, when i dial the "special number," do i need a network connection or is that number something internal to the phone (no rogers network (or any other) needed)? in other words, can i "unlock" my rogers locked phone using the non-rogers firmware upgrade 4.1.1 ?

The hardware for the ATT s3 (d2att) and Rogers/Telus/Bell s3 (d2can) is identical except the US version uses different boot loaders and modem from the Canadian version.
The Sprint and Verizon versions of the s3 are CDMA, not GSM like the ATT and Rogers version.
Neither a network connection, SIM card, or SD card is not needed to use the menu method to unlock the phone. You will need a non-Rogers SIM card to test the phone after it is unlocked. Do not upgrade beyond 4.1.1 until the phone is network unlocked. Upgrading beyond stock 4.1.1 will permanently lock you out of the dialler unlock menu and you will have to buy an unlock code if you want to network unlock the phone.
You can use any 4.1.1 stock ROM from Bell, Telus, Koodo, Rogers, or Fido to access the dialler unlock menu.
Use Odin 3.07 and the original Samsung USB cable to flash the ROM in the PDA slot of Odin.
Make sure you have a backup of your data as things can go wrong during any flash process that may cause you to lose your data.
All of the information I have provided is something that I have personally done. I can provide no guarantee that you won't encounter a problem or brick your phone. Proceed at your own risk.

Any updates?

audit13 said:
Any updates?
Click to expand...
Click to collapse
yes i have updates! i finally got around to doing this today and...
i updated to 4.1.1 bell stock that you suggested. i used heimdall to do the flash instead of odin using this guide:
https://forum.xda-developers.com/wiki/Heimdall
other than that i followed your advice to the T
success.
i then did the menu unlock procedure (a few times). i don't know if it worked or not because i am unable to test with a different network sim yet.
i then went to version 4.4.2 from sammobile using heimdall again -- all went well.
i then installed the (for me) non-working lineageos from last week and it now works -- i assume due to the upgraded baseband you suggested. i am able to make and receive calls as normal now.
i then updated to lineageos 14.1 20170904 with gapps nano. and i can report that all is working extremely well.
thank you so much audit13 for working this through with me. i have learned a ton of new stuff, and not a single brick.
thanks again!

That's great news. Thanks for the update.
We're all here to help and learn