need help finding a stock based ROM - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Attached is a screenshot of the relevant info about what I'm on now. What I need to know is what stock based ROM can I flash on this device? I need to unlock it for use on T-Mobile, but the unlock code from at&t isn't working. The only method that has worked for other people when it won't take the provided unlock code is to use *#197328640# to turn on the "Perso Sha256" option, then restart the phone and it should accept the unlock code after that.
The problem is, I'm on a slim/AOSP based ROM so the Samsung dialer codes don't work. So I need to know which Samsung based ROM to flash on this device that won't brick it. Not sure what my bootloader version is, but I can check that if necessary. Someone please help!

The free unlock method only works on a stock 4.1.1 dialler, bootloader, and ROM.
Boot into download mode. Do you see anything about Knox or warranty bit? If yes, you can't use the free method and you'll have to buy an unlock code or convince at&t to give you a code for free.

audit13 said:
The free unlock method only works on a stock 4.1.1 dialler, bootloader, and ROM.
Boot into download mode. Do you see anything about Knox or warranty bit? If yes, you can't use the free method and you'll have to buy an unlock code or convince at&t to give you a code for free.
Click to expand...
Click to collapse
You're the second person to misunderstand what I'm asking for lol. I do not want to use the code-less unlock method. I have an unlock code from the carrier. It will not accept the code with Perso Sha256 turned off though, so I need to be able to turn it on so the phone will accept the unlock code from the carrier. CM/AOSP-based roms don't accept samsung dialer codes, so I'm not able to access the menu to turn it on. I'm looking for a stock-based rom that will work with my current baseband so that I can use the samsung dialer codes.

Is the phone a i747 or i747m? It can be confirmed in download mode as it is a very important distinction.

audit13 said:
Is the phone a i747 or i747m? It can be confirmed in download mode as it is a very important distinction.
Click to expand...
Click to collapse
It's i747
Though I solved this on my own and I'm going to mark the thread as solved and provide a link to the ROM I used in case someone else has this issue. Using an old 4.3 version of venom ROM I was able to use the Samsung dialer code to turn Perso Sha256 on and after a reboot, the phone finally accepted the unlock code from at&t and immediately registered to the T-Mobile network with data, voice and SMS working perfectly.

There's enewmans's S3 Rx custom ROM based on the Android 4.4.2 stock ROM.

Related

[Q] How to unlock SGH-i747m

How do I unlock the phone? I currently have Cm11 on it.
I want to ditch rogers (terrible service) so what do I need to do to unlock it?
side note, when I got the phone it was via future-shop warranty and they gave me a fido version and put my rogers sim in it, did they unlock it then?
SpacePotato said:
How do I unlock the phone? I currently have Cm11 on it.
I want to ditch rogers (terrible service) so what do I need to do to unlock it?
side note, when I got the phone it was via future-shop warranty and they gave me a fido version and put my rogers sim in it, did they unlock it then?
Click to expand...
Click to collapse
Since Fido is really owned by Rogers, your Rogers SIM may work in the phone if it was originally locked to Fido. To check whether it's unlocked or not, try putting in a non-compatible SIM (like Bell or Telus) and see whether it prompts you for an unlock code. If it does, you would need to purchase a code online or request one from the carrier. If it wasn't on Android 4.3 prior to the CM11 installation, you may be able to install stock Android 4.1.1 and free unlock. Either way, whether you are free unlocking or using an unlock code, you have to be on a stock ROM for it work. You can check your phone's settings and see what baseband and bootloader versions you have. This will tell us know whether you should flash stock 4.1.1 or 4.3
Larry2999 said:
Since Fido is really owned by Rogers, your Rogers SIM may work in the phone if it was originally locked to Fido. To check whether it's unlocked or not, try putting in a non-compatible SIM (like Bell or Telus) and see whether it prompts you for an unlock code. If it does, you would need to purchase a code online or request one from the carrier. If it wasn't on Android 4.3 prior to the CM11 installation, you may be able to install stock Android 4.1.1 and free unlock. Either way, whether you are free unlocking or using an unlock code, you have to be on a stock ROM for it work. You can check your phone's settings and see what baseband and bootloader versions you have. This will tell us know whether you should flash stock 4.1.1 or 4.3
Click to expand...
Click to collapse
Baseband is I747MVLUEMK5 bootloader I have no idea, I just used odin to flash CWM.
I'm open to flashing 4.1 to get a free unlock then going back to CM11
SpacePotato said:
Baseband is I747MVLUEMK5 bootloader I have no idea, I just used odin to flash CWM.
I'm open to flashing 4.1 to get a free unlock then going back to CM11
Click to expand...
Click to collapse
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.
Larry2999 said:
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.
Click to expand...
Click to collapse
ok, which carrier would I have to talk to, it was a fido phone as mentioned previously. Also is their a possibility I could downgrade to 4.1, or is it a guaranteed brick?
SpacePotato said:
ok, which carrier would I have to talk to, it was a fido phone as mentioned previously. Also is their a possibility I could downgrade to 4.1, or is it a guaranteed brick?
Click to expand...
Click to collapse
You would need to contact Fido since it was originally on their network. I'm afraid nobody has yet posted a method to allow you successfully downgrade to 4.1.1 and still preserve the free unlock functionality. You could follow some instructions posted in this forum to downgrade to 4.1.1. However, this wouldn't allow you downgrade the bootloader/modem which is required for the unlock.
Larry2999 said:
You would need to contact Fido since it was originally on their network. I'm afraid nobody has yet posted a method to allow you successfully downgrade to 4.1.1 and still preserve the free unlock functionality. You could follow some instructions posted in this forum to downgrade to 4.1.1. However, this wouldn't allow you downgrade the bootloader/modem which is required for the unlock.
Click to expand...
Click to collapse
ok thanks.
Larry2999 said:
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.
Click to expand...
Click to collapse
I found a way to downgrade from 4.3 to 4.1.1 or 4.0.4 stock. (for Bell).
I bought and used Mobile Odin (available on the play store). Anyhow, it flashes the stock rom and not the old bootloaders. Once you're on 4.1.1 or 4.0.4 the problem is that *#197328640# no longer works. Basically when you type that ServiceMode comes up, but all the options are gone. I believe this is because they locked those features on the new bootloader (which is still on the phone after the Mobile Odin downgrade...)
Unlocking this phone has become a major pain in the ass.
htc_softbank said:
I found a way to downgrade from 4.3 to 4.1.1 or 4.0.4 stock. (for Bell).
I bought and used Mobile Odin (available on the play store). Anyhow, it flashes the stock rom and not the old bootloaders. Once you're on 4.1.1 or 4.0.4 the problem is that *#197328640# no longer works. Basically when you type that ServiceMode comes up, but all the options are gone. I believe this is because they locked those features on the new bootloader (which is still on the phone after the Mobile Odin downgrade...)
Unlocking this phone has become a major pain in the ass.
Click to expand...
Click to collapse
You are quite right. Sam and the networks are winning this time. You can indeed use Mobile Odin to downgrade the system (ROM). However, there hasn't been any reports of a successful downgrade of the bootloader. Therefore, even if you downgrade without bricking the phone, you can't free unlock. Tough but you will need a carrier unlock code.

How to sim unlock the trac phone sgh-s970g galaxy s4...and possibly others

Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
hi bro
robhuffster said:
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
hi bro, my question is, i have one L720T for unlock this, i need root with m919 ? and unlock with SPT BOX ???
robhuffster said:
Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
here
javed91214 said:
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
Click to expand...
Click to collapse
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
robhuffster said:
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
Click to expand...
Click to collapse
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
javed91214 said:
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
Click to expand...
Click to collapse
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Ive tried that
bigbyte.me said:
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Click to expand...
Click to collapse
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
robhuffster said:
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
Click to expand...
Click to collapse
I can only find a 4.3 ROM for L720T not any version before it.
So, just to clarify, do we have to use the ROM or can we do this on stock? I have two of these LTE-T marked phones from Straight Talk that I'd like to use AT&T Straight Talk SIMs with.
tried this on a stock tmobile mdl firmware with the mh3 baseband with no go.. What am i doing wrong?
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
imzjustplayin said:
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
Click to expand...
Click to collapse
Yes i have, Tracfone will have to provide an update to fix the issue. Reason is that everytime you enter the code its accepted. But as soon as you reboot the phone it asks for the code again. So not sure how tracfone will handle this.
Well I returned my $250 Black Friday special as I just have no faith in getting an unlock code for these Galaxy S4s as I wanted to use it on AT&T and I had picked up the Tmobile version. I'll have to settled for a used item instead.
So will this phone work with a straight talk att Sim and a tmo Sim as long as its through ST?
After fallowing all the steps I get to the 8 0's hit enter and it just sits at the screen, and says unsuccessful. Sgh-s970g bb:mh3 av:4.2.2
Anyone know of a pay site to unlock this device. The one legit one was for over seas and I'm in US. I tried offering straight talk money and they said this phone needs to be active for 5 more months before they'll provide me the unlock code. I guess you need 12 months of active service to be eligible for the unlock program. The only thing is, is it will only work on a straight talk T-Mobile Sim until then. Tia.
It DOES work. I installed the wikid v8 rom on a SHG-S970G this morning, opened region lock, unlocked modem, relocked modem rebooted, and entered my unlock code and BAM, Successful unlock. Thanks a grand! By the way i bought the unlock code on a 3rd party site. Im now running ATT on the phone.
Straighttalk will only unlock phones purchased on or after Dec 2013, currently active on ST Service & have been active for 12 consecutive months, if you call the unlock department you will be transferred to their automated information center if your phone is not eligible for unlocking, this is just to inform you of the requirements to unlock your device.
ST unlock
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Extrapolate to S5?
james4117 said:
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Click to expand...
Click to collapse
Do you think a similar technique can be applied to a Galaxy S5 from Net10/TracFone? I tried to use a S902L with my (Canadian ) Rogers SIM card and unsurprisingly, it didn't accept it

[Q] Traveling to Europe but can't unlock phone (CM11)

I have searched and searched and can not figure out how to unlock this phone.
I am currently running CM 11 2014 05 04 snapshot
Kernal 3.4.87-cyanogenmod-gf485c9a
Ofcourse Galaxy S3 on AT&T
I have tried the *#197328640# but absolutely nothing happens
I contacted at&t for the unlock code. They send me one, I inserted a tmobile sim, get prompted for the code, put it in and it prompts me again.
In the email from at&t I was warned that if I type the code in 5 times the phone will become permantly locked to at&t so I only did it twice so far.
I have read posts that I need to be on 4.1.1 for the *#190xxxxxxx to work but at the same time I see multiple posts saying that it will brick my phone if I downgrade.
Any help would be VERY appreciated
If you do not have the 4.3 bootloader or newer, you can use Odin to downgrade your ROM to 4.1.1, unlock it, and upgrade.
If you do have the 4.3 or newer bootloader, you must purchase an unlock code. If you purchase an unlock, you will probably have to be running a stock ROM in order to get the prompt to enter your unlock code.
Yup. Flash stock and enter the code from a stock dialer and ut should work.
I already have the code from ATT so I'll flash stock and try that
Thx alot
-deleted
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

Unlock Code

I recently purchased an unlock code from a company online. I finally received my code tonight but I'm unsure how to go about using it to unlock the device. The Device Unlock application wouldn't allow me to enter anything, so I dialed #7465625*638*# and entered the code that way. I followed a few trouble shooting techniques but it still won't work on AT&T. Does anyone have any experience with this using this device? If so, I'd love to hear what to do.
Try flashing a different Rom from another carrier through recovery. Maybe the AT&T rom. I simply put a tmobile sim in the phone and it successfully my phone through the application.
Z51 said:
Try flashing a different Rom from another carrier through recovery. Maybe the AT&T rom. I simply put a tmobile sim in the phone and it successfully my phone through the application.
Click to expand...
Click to collapse
Youre saying to flash the stock rom from AT&T? Have you done this? What do you mean you put a TMobile SIM in and it unlocked it..
1. Did you have a TMobile S6?
2. Did you flash an ATT rom to it? Custom recovery or stock?
3. Did you use a code?

Custom Rom While On Stock KitKat 4.4.2 ?

I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Jaii_Versace said:
I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.
Jaii_Versace said:
... I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ?... So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
I concur with @jason2678
I have an AT&T SGS3 (d2att/i747) that is on the NE4 bootloader and modem (4.4.2) and am running CM11 atm. As a matter of fact, none of the CM or AOSP roms since late in 4.4.2 development will run unless you are on one of the 4.4.2 bootloaders (NE4, NJ1, NJ2)
What you stated, quoted above, is true for the Verizon SGS3 (d2vzw/i535).
jason2678 said:
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.
Click to expand...
Click to collapse
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks
car2carl said:
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks
Click to expand...
Click to collapse
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.
You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.
dawgdoc said:
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.
Click to expand...
Click to collapse
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Last week I want to use this phone with Tmobile SIM but got Phone Not Allowed MM#6 message . The rom was still 4.3, Contact AT&T and got Unlock code.
but this phone didn't ask for unlock code entry option and still 4.3 , tried the whole weekend with service mode and upgrade to 4.4.2 via CWM recovery.
and still no luck
With your suggestion , it means that I don't have choice to downgrade back to 4.3 rom same with my bootloader and baseband? I heard we can't downgrade if we already in 4.4.2 , is that true?
But I still use stock recovery from CWM.
Before I proceed with replacing with stock recovery, is the stock recovery have to be 4.3 stock recovery or any version for S3? do I need to use odin to change to stock recovery?
if you have good link please help?
Thanks again
---------- Post added at 06:40 AM ---------- Previous post was at 06:33 AM ----------
audit13 said:
You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.
Click to expand...
Click to collapse
Stock dialer means the entire Rom must be replaced to match my bootloader and modem combination or just replace the dialer in my case and still use 4.4.2?
Appreciated if you can help, thanks
Stock dialler requires a stock Samsung kernel.
From what I am seeing, you are on the 4.3 bootloader and modem. As I said before, there are custom TouchWiz 4.4.2 Roms that will run on the 4.3 bootloader and modem. Changing to a 4.3 rom, stock or otherwise, therefore would not be downgrading your bootloader and modem.
What rom are you on?
Some of the custom TouchWiz roms use dialers from the S5, therefore not stock for the S3.
Some of the custom TouchWiz Roms use the stock kernel, some use a custom kernel.
Did you flash a custom kernel?
What is your kernel version? (check under Settings > About Phone)
With the answers to the questions I asked, audit13 and I may be able to give more definite guidance. It could be as simple as flashing the stock kernel and a stock dialer. But, I can't tell at the moment.
car2carl said:
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Click to expand...
Click to collapse
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
audit13, dawgdoc, DocHoliday77
Thank you for your responses , Sorry I couldn't response any sooner as I worked in mountain/forest area that browsing the web is luxury
(yes I remember for sure I have used this cell phone overseas couple times and the way I unlocked through service mode. Way before AT&T OTA update since new)
I have weird situation that make me wondering if I had unlocked my S3 since message
"PHONE NOT ALLOWED MM#6" comes up if I use any other carrier beside AT&T
Per http://forum.xda-developers.com/showthread.php?t=2789917
thanks to OP
I just managed to change my bootloader to I747UCUFNE4 and also my baseband version to I747UCUFNE4
I still keep my CWM 6.0.4.7 recovery touch
I have Flashed with countless other rom such below:
I747UCUFNE4_Stock_Rooted_Odex.zip
I747UCUFNE4_Stock_Rooted_Deodex_3-31-15.zip
I747UCUFNE4_Stock_Rooted_3-31-15.zip
and even custom rom without any success
This was happened with my S3 after flash.
if I flashed with inserted active SIM Card (T Mobile or foreign SIM Card)
I will see PHONE NOT ALLOWED MM#6 after reboot
if I flashed without any SIM Card inserted after reboot :
- inserted foreign sim card and reboot again
I will have AT&T as roaming provider and for about few seconds received text message about fee from SIM issuer roaming to AT&T so means My S3 is unlocked...
(no... not so much!!!) in few minute I will have "PHONE NOT ALLOWED MM#6" and phone is useless as emergency only.
- inserted T-Mobile Sim Card and reboot again it shows "PHONE NOT ALLOWED MM#6" immediately
My Kernel Version :
3.4.0-1514807
[email protected] #1
Mon May 19 21:00:05 KST 2014
Thank you if you can help.
So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.
audit13 said:
So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.
Click to expand...
Click to collapse
No, It doesn't ask at all. just pop up "Phone not allowed MM#6."
my foreign SIM is ok.
I tested on Galaxy Note 4 T-Mo (unlocked) it grabbed ATT roaming,
tested on Iphone 4S (ATT-unlocked) it grabbed Tmobile roaming:laugh:
I just flashed stock recovery and still no go..
do I need to unroot?
Can I flash stock root rom with stock recovery
Thanks
What rom was on the phone when you inserted a foreign sim?
If you are running a Samsung rom, try this:
Www.unlockriver.com/Samsung-unlocking
I am using I747UCUFNE4_Stock_Rooted_3-31-15.zip
I just replaced CWM recovery with UCUFNE4 stock recovery
I did unroot with SuperSU and also
do factory setting through setting menu
basically my phone just as new factory setting but with UCUFNE4
the funny thing is :System Status: Custom is this related I have rooted this device before?
When I turn on bootloader mode (Odin Mode)
product name : SGH-I747
Current Binary: Samsung Official
System Status: Custom
Qualcomm secure boot : enable
warranty bit: 1
bootloader ap Swrev: 3
as I have stated at my 1st post that I had official unlock code from AT&T and got email from them the unlock PIN
but there is no option asking to key in the PIN with other carrier sim inserted .
I have checked also with Swappa esn check
and result is
Blacklisted => Not Indicated
This device does not appear to be globally blacklisted.
spent countless hours just to beat solving this device and read the threads and no result. And still "PHONE NOT ALLOWED MM#6"

Categories

Resources