Hi,
Is there a way to setup proxy settings on this thing like on an android phone? I've looked but I can't find a place to put the settings in.
Is there an app I can sideload to do this?
Thanks,
Ltjesse
If you find a solution for proxy, please let me know . I'm searching also ..
Related
anyone know where or how i can get these cab files. I'm trying to set my MMS settings. i tried to manually do it. but it didnt work.
i tried to search but was unable to find clues or answers
T-Mobile_Network_Customizations.cab - T-Mobile Data/MMS/IE/OTA/Security/Registry settings
try here
http://forum.xda-developers.com/viewtopic.php?t=52775&highlight=tmobilenetworkcustomizations+cab
I was able to install Opera Mini 4 via usb cable with my computer onto my Dash phone and O.M. is a lot better than IE in my opinion. However, once I disconnect the usb cable, O.M. no longer is able to connect. When I use the usb cable again, it still won't connect. " Failed to connect to the Internet " is the message that'll appear on my phone. The only time it will connect is when I re-install O.M. while synced with the computer via usb cable. It seems like to be a one time deal only each time.
I'm just wondering if there is some sort of proxy hack for this and has O.M. 4 worked for anyone who is using the 5.99 t-zones proxy hack.
Thanks in advance !
Ok, my first post was edited. Ignore my 2nd one which is this.
I used the proxy hack and it works like a charm. Try restarting your phone and see if the proxy hack works with Opera (which it should work for sure).
Thanks for the reply, jdoggraz.
I have tried soft rebooting severals times and O.M. still doesn't connect. That same message ( Failed to connect to the Internet ) still appears.
Any other suggestions will be greatly appreciated !
I believe I had to go to menu/tools/settings and change the protocol from socket to http before it would work.
Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."
Tried both of your guys' suggestions and it's still unable to connect. Will it work using the regular t-zones w/out the proxy hack?
Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.
jdoggraz said:
Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."
Click to expand...
Click to collapse
Still no success. Just curious though, what are your exact proxy settings?
aaronb532 said:
Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.
Click to expand...
Click to collapse
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !
TEE82 said:
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !
Click to expand...
Click to collapse
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.
aaronb532 said:
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.
Click to expand...
Click to collapse
Yeah and it still won't connect to the internet. I also did a soft reboot prior and attempted w/the new AP again but still the same result so now I had changed it back to it's default AP. Oh, and to answer your previous question, I have wm 6.
Here are my exact settings:
Description: T-Zones Proxy
Connects from: Wap Network
Connects to: The Internet
Proxy (name : port): 216.155.165.50:8080
Type: HTTP
User name: <blank>
Password: <blank>
Connects to: WAP Network
Access point: wap.voicestream.com
User name: <blank>
Password: <blank>
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: <blank>
Internet Explorer: "Automatically detect settings" is unchecked.
Select Network: The Internet
Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.
Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.
Click to expand...
Click to collapse
Those settings are not the problem, the java manager is. If you want to use OM over the proxy you need the esmertec jbed manager. I did a search and found a couple threads that still have different versions of it.
http://forum.xda-developers.com/showthread.php?t=330369&highlight=jbed
http://forum.xda-developers.com/showthread.php?p=2517768#post2517768
You could also upgrade your OS to WM6.1. Both Kavana and Rickwyatt's Roms have it preinstalled.
Just make sure you're ready to do a hard reset if things don't go well!
Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !
TEE82 said:
Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !
Click to expand...
Click to collapse
AARON YTMND!
I am new to tweaking my phone, it is a ATT Tilt 2 and I currently have the Energy Rom and Co0kies. My question is that I cannot connect to ATT My MEdia net thru Opera 10. Can anyone give me any pointers on how to configure it to have opera connect to My Media net.
Thanks
Colorado
Check this post, ignore steps 1-4
http://forum.xda-developers.com/showpost.php?p=5870098&postcount=416
Thanks for reply, but no help...
JColorado said:
Thanks for reply, but now help...
Click to expand...
Click to collapse
I think you could have been a tad more vague.
How is it possible that you were able to flash a rom and Hardspl the phone but you are unable to load a cab?
When you replaced the rom all the factory settings for your provider were erased. The cab he pointed to you reinstalls the ATT settings. You will still have to go to the connections box and select what you want your data connection to be.
Ask a proper question and on this site you are likely to get a great and informative response.
Oh, and welcome to XDA.
Well, Sorry if my question seemed vauge, Thanks for the cab file. I was able to install it no w/ no problems. My problem is not that I cannot connect with My MEdia net for internet connection, but I am trying to access the the ATT Stock My MEdia net personal Home page using Opera or any Browser.
Any help would be appreciated...
you have to enable the proxy to view medianet sites
go to this thread and download the proxy manager cab, once installed, just open up the enable proxy and you'll be good to go.
Thanks, Will install and check it out thanks...
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
JColorado said:
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
Click to expand...
Click to collapse
The ATT Proxy cabs are for internet explorer. For Opera you need to modify the opera config. To do this point the Opera browser to "opera:config"
Once there, go to the Proxy settings and enable these:
Enable HTTP 1.1 for proxy
HTTP server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP
Use HTTPS
Use Proxy On Local Names Check
Save the settings. This will get you access to http://device.home
Unfortunately, Celluar Video will not work as it checks the User Agent, and Opera 10 is not supported through the ATT Proxies. You can try setting a custom User Agent in "opera:config" and set it to something like:
"HTC-ST7377/2.07.401.1 (80303) WWE Opera/9.70 (Windows NT 5.1; U; en)"
I have no clue if this will work though.
-e
IDK
Thank you for your help, I am still having difficulties...
It basicly timed out trying to connect to the site, so I tried a basic site i.e. google and it still was timing out? I will try again, with the help of one of my co-workers who is more tech savy using the TP2 aswell but is w/ verizon
Was toying with random toggle widgets and 3g data stopped working. I accidentally hit reset to default in the hidden APN settings and it just deleted everything?
Can anyone help me with APN settings or a simple solution? Thanks mucho.
Did you try updating your profile by going to settings -> about phones ->system updates ->update profile ?
If that doesn't work do you know specifically what settings you need? For example, do you need dsa server, mmsc, etc? I might be able to tell you the settings I have.
Updating profile doesn't work, it just gives an error. Funny enough, my 4g works fine.
Need a whole giant list of things though I was hoping their would be an easier way
Name
APN
Proxy
Port
user name
Password
Server
MMSC
MMS proxy
MMS port
MCC
MNC
Authentication type
APN type
Go back to DI18 via Odin, update Profile + PRL, then odin back to DK28, then reflash whatever ROM you were using.
Yeah, I was thinking the same thing Overstew... I'm on syndicate, so I don't have those options above. I tried looking elsewhere but couldn't find anything either regarding those"default" settings.
if you know your msl try doing a data restore, ##3282#, it should restore it back to defaults, but your device might not go through the ota programing
Does anyone know if there is a way to back up those pesky hidden settings just in case something bad happen to your phone?
riceknight said:
Updating profile doesn't work, it just gives an error. Funny enough, my 4g works fine.
Need a whole giant list of things though I was hoping their would be an easier way
Name
APN
Proxy
Port
user name
Password
Server
MMSC
MMS proxy
MMS port
MCC
MNC
Authentication type
APN type
Click to expand...
Click to collapse
I got a HTC u11 and I accidentally deleted the apn settings and it won't allow me to add anything except the apn but no other settings.
this is a very easy way to mod any apn in your phone.i modded apn on OnePlus 7pro this is easier . All you need is a database editor i used sqlite editor. click apps on top tab (ive included pictures) find phone and message storage (com.android.providers.telephony). then click telephony.db then select carriers. then all apns will be displayed find your carrier mines 310260(T-Mobile) put a 1 on user_visable.done. on the tethering apn also put -1 on authtype and go to your settings look at apn. if you make user_editable=1 it wont work right well didnt on 7pro it needs to be like mms apn so when plugged in it works i changed mtu but its up to you guys on what needs to be its easy. im trying to find other ways to mod the new userspace and init that boots first hope this helps everyone if anyone needs help just ask
Can you provide more info please?? Can you take a screenshot of each of your APNs?
Thank you!
apn is in database when you open you'll see the apn for your carrier I'm on 12 now still works