anyone know where or how i can get these cab files. I'm trying to set my MMS settings. i tried to manually do it. but it didnt work.
i tried to search but was unable to find clues or answers
T-Mobile_Network_Customizations.cab - T-Mobile Data/MMS/IE/OTA/Security/Registry settings
try here
http://forum.xda-developers.com/viewtopic.php?t=52775&highlight=tmobilenetworkcustomizations+cab
Related
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
I am new to tweaking my phone, it is a ATT Tilt 2 and I currently have the Energy Rom and Co0kies. My question is that I cannot connect to ATT My MEdia net thru Opera 10. Can anyone give me any pointers on how to configure it to have opera connect to My Media net.
Thanks
Colorado
Check this post, ignore steps 1-4
http://forum.xda-developers.com/showpost.php?p=5870098&postcount=416
Thanks for reply, but no help...
JColorado said:
Thanks for reply, but now help...
Click to expand...
Click to collapse
I think you could have been a tad more vague.
How is it possible that you were able to flash a rom and Hardspl the phone but you are unable to load a cab?
When you replaced the rom all the factory settings for your provider were erased. The cab he pointed to you reinstalls the ATT settings. You will still have to go to the connections box and select what you want your data connection to be.
Ask a proper question and on this site you are likely to get a great and informative response.
Oh, and welcome to XDA.
Well, Sorry if my question seemed vauge, Thanks for the cab file. I was able to install it no w/ no problems. My problem is not that I cannot connect with My MEdia net for internet connection, but I am trying to access the the ATT Stock My MEdia net personal Home page using Opera or any Browser.
Any help would be appreciated...
you have to enable the proxy to view medianet sites
go to this thread and download the proxy manager cab, once installed, just open up the enable proxy and you'll be good to go.
Thanks, Will install and check it out thanks...
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
JColorado said:
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
Click to expand...
Click to collapse
The ATT Proxy cabs are for internet explorer. For Opera you need to modify the opera config. To do this point the Opera browser to "opera:config"
Once there, go to the Proxy settings and enable these:
Enable HTTP 1.1 for proxy
HTTP server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP
Use HTTPS
Use Proxy On Local Names Check
Save the settings. This will get you access to http://device.home
Unfortunately, Celluar Video will not work as it checks the User Agent, and Opera 10 is not supported through the ATT Proxies. You can try setting a custom User Agent in "opera:config" and set it to something like:
"HTC-ST7377/2.07.401.1 (80303) WWE Opera/9.70 (Windows NT 5.1; U; en)"
I have no clue if this will work though.
-e
IDK
Thank you for your help, I am still having difficulties...
It basicly timed out trying to connect to the site, so I tried a basic site i.e. google and it still was timing out? I will try again, with the help of one of my co-workers who is more tech savy using the TP2 aswell but is w/ verizon
Hi,
Is there a way to setup proxy settings on this thing like on an android phone? I've looked but I can't find a place to put the settings in.
Is there an app I can sideload to do this?
Thanks,
Ltjesse
If you find a solution for proxy, please let me know . I'm searching also ..
Hey everyone,
Back when I purchased my device I did not have a LTE option available for mobile data. It was only available via the 'secret menu 3485#*855#'.
Recently I managed to get it to work and have it as an option (via editing /system/build.prop), but there still is an issue: my selection will not save. This means that when I reboot my phone, it will go back again to GSM.
So I figured, maybe the LTEConfigs.apk has something to do with it. That and the .dex thingy.
I deleted them a while back while trying a different solution, and I'm wondering what would happen if I bring em back?
So basically, what do the files do?
Thanks.
this is a very easy way to mod any apn in your phone.i modded apn on OnePlus 7pro this is easier . All you need is a database editor i used sqlite editor. click apps on top tab (ive included pictures) find phone and message storage (com.android.providers.telephony). then click telephony.db then select carriers. then all apns will be displayed find your carrier mines 310260(T-Mobile) put a 1 on user_visable.done. on the tethering apn also put -1 on authtype and go to your settings look at apn. if you make user_editable=1 it wont work right well didnt on 7pro it needs to be like mms apn so when plugged in it works i changed mtu but its up to you guys on what needs to be its easy. im trying to find other ways to mod the new userspace and init that boots first hope this helps everyone if anyone needs help just ask
Can you provide more info please?? Can you take a screenshot of each of your APNs?
Thank you!
apn is in database when you open you'll see the apn for your carrier I'm on 12 now still works