Opera Mini 4 and T-zones proxy hack - HTC Excalibur

I was able to install Opera Mini 4 via usb cable with my computer onto my Dash phone and O.M. is a lot better than IE in my opinion. However, once I disconnect the usb cable, O.M. no longer is able to connect. When I use the usb cable again, it still won't connect. " Failed to connect to the Internet " is the message that'll appear on my phone. The only time it will connect is when I re-install O.M. while synced with the computer via usb cable. It seems like to be a one time deal only each time.
I'm just wondering if there is some sort of proxy hack for this and has O.M. 4 worked for anyone who is using the 5.99 t-zones proxy hack.
Thanks in advance !

Ok, my first post was edited. Ignore my 2nd one which is this.

I used the proxy hack and it works like a charm. Try restarting your phone and see if the proxy hack works with Opera (which it should work for sure).

Thanks for the reply, jdoggraz.
I have tried soft rebooting severals times and O.M. still doesn't connect. That same message ( Failed to connect to the Internet ) still appears.
Any other suggestions will be greatly appreciated !

I believe I had to go to menu/tools/settings and change the protocol from socket to http before it would work.

Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."

Tried both of your guys' suggestions and it's still unable to connect. Will it work using the regular t-zones w/out the proxy hack?

Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.

jdoggraz said:
Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."
Click to expand...
Click to collapse
Still no success. Just curious though, what are your exact proxy settings?

aaronb532 said:
Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.
Click to expand...
Click to collapse
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !

TEE82 said:
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !
Click to expand...
Click to collapse
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.

aaronb532 said:
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.
Click to expand...
Click to collapse
Yeah and it still won't connect to the internet. I also did a soft reboot prior and attempted w/the new AP again but still the same result so now I had changed it back to it's default AP. Oh, and to answer your previous question, I have wm 6.
Here are my exact settings:
Description: T-Zones Proxy
Connects from: Wap Network
Connects to: The Internet
Proxy (name : port): 216.155.165.50:8080
Type: HTTP
User name: <blank>
Password: <blank>
Connects to: WAP Network
Access point: wap.voicestream.com
User name: <blank>
Password: <blank>
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: <blank>
Internet Explorer: "Automatically detect settings" is unchecked.
Select Network: The Internet
Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.

Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.
Click to expand...
Click to collapse
Those settings are not the problem, the java manager is. If you want to use OM over the proxy you need the esmertec jbed manager. I did a search and found a couple threads that still have different versions of it.
http://forum.xda-developers.com/showthread.php?t=330369&highlight=jbed
http://forum.xda-developers.com/showthread.php?p=2517768#post2517768
You could also upgrade your OS to WM6.1. Both Kavana and Rickwyatt's Roms have it preinstalled.
Just make sure you're ready to do a hard reset if things don't go well!

Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !

TEE82 said:
Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !
Click to expand...
Click to collapse
AARON YTMND!

Related

xda exec issues PLEASE HELP IM NEW TO THIS

Hello. I have a XDA exec on o2.
I upgraded the ROM from their website.
Issues :- If I install in 0506 mode I loose my 3G internet connection and the ability to send and recivie MMS. (I can not find the connection settings)
No one can send me anything by bluetooth. But bluetooth is working as my head set works.
Any Hacks you think I should be running ?
Thanks
Carll
I di the same as you and it works much better than before. You don't need any hack. Just O2 support and demand they give the settings.
For MMS as I did it:
go to your inbox/menu/MMS configuration. Goto the server tabs.
tap new and enter the following:
Server Name: I call it O2 UK
Gateway 193.113.200.195
port number 8080
server address: http://mmsc.mmc.o2.co.uk:8002
connect via: choose yoru network I put My Work network
sednignzie limitations: 100k
WAP version: Wap 2.0
I don't have the bluetooth problem. But .... I was unable to receive files, you can enable this in registry (can't remember now - doing this from work ) but the check the registery OBEX or something
Also after the upgrade my battery icon disappeared but I got back by enabling it in the registry.
Check the hack pool at this forum (hack is not the correct word in my opinion - settings enabling in the registry is more correct).
Either way I do think yo should contact O2 and they are obliged to give you all the settings and help you wiht bluetooth (since it is their upgrade did that according to you.)
Hope this helps.
http://forum.xda-developers.com/viewtopic.php?t=32412
or you could try following the above thread.
Download the cab file and keep it on your storage card. Then you just need to run the file and it is all done for you automatically.
Keep it safe in case you need it again. Saves entering the information manually.
Thanks
http://forum.xda-developers.com/viewtopic.php?t=32412
or you could try following the above thread.
Download the cab file and keep it on your storage card. Then you just need to run the file and it is all done for you automatically.
Keep it safe in case you need it again. Saves entering the information manually.

O2 XDA Orbit UK with Voda SIM - GPRS Problem

Hi All,
Am sure there are many threads - did a search but came up with nothing like mine. O2 Branded XDA Orbit with Vodafone SIM.
Upgraded from Default ROM to WM6 Bepe version - everything seems fine except my GPRS Connection.
CE OS 5.2.1238 (Build 17745.0.2.3)
Rom 3.4.207.1 WWE
4/18/07
Radio 2.49.90
Protocol 4.1.13.25
Model ARTE200
I have tried connecting to GPRS using my VODA SIM - which I know for a fact IS enabled for it as I was using it on my XDA-IIs - Now I just cannot connect to the GPRS to access my gmail or anything whatsoever.
I entered all the details for Voda-GPRS manually and also from CAB from this site and still cannot connect - it starts to connect and says the "connection was disconected" check settings...!!!
I am at my wits end on what the problem is !
Any ideas?
Dev
A couple of months ago I had an HTC Beta of WW6 and had to wipe it as it would not connect, same as you. Afterwards, I found out that WW6 install resets varions Connections settings incorrectly (part of beta).
Go to Settings / GPRS settings and make sure you have CHAP selected
My install had PAP selected.
Jeff
Sounds to me like the rom you have used has a feature/setting that disconnects GPRS connections for whatever reason - possibly to stop programs from auto connecting with GPRS.
Have you checked with the creator of the ROM to see if anything like this was implemented in to it? It may be fixable with a registry tweak or setting.
Mine worked both Bepe and B&B V2 ok.
GPRS:
1. Click on Start > Settings > Connections tab > Connections
2. Under the heading 'My Work Network', click on 'Add a new modem
connection'
3. The settings you require are:
4. Name = Vodafone MMS
5. Modem = Cellular Line (GPRS)
6. Click 'Next'
7. Access Point Name = wap.vodafone.co.uk
8. Click 'Next'
9. Username = wap
10. Password = wap
11. (leave the Domain field blank)
12. Click 'Finish'
Thanks Guys - Worked fine - Seems I was giving the APN wrong...
Well finally atleast it's working now...
Now only to get the Blackberry connect to work and I'm on cloud nine !!!
Hi I was trying to set my dad up with my old wizard.
He's on vodaphone and I've been able to get the GPRS working using the above settings (I also had to add a proxy server of 212.183.137 - type - HTTP port 8799) but IE is now browsing the internet.
However when I try to connect to a imap mail account it just says connecting, then says failed to connect, check settings.
Does anyone with a vodafone account know if you're able to connect to a personal mail server?
Are there any more specific proxy settings?
(start -> settings -> connections -> manage exsiting connections -> proxy settings ->advanced)
Or any advice from someone who's been able to get this working.
Cheers
Matt
All Carrier UK Settings
I downloaded this from the HTC Site - It has the settings for all carriers...Maybe this will help.
Thanks tried this, but it has an APN of internet and these settings always give me the
'answering modem has disconnected error'
I used to get the sae error and then I called up Vodafone and told them. They reset the SIM from their side and things started working fine.
OK thanks for that. I'll just hand it over to my dad with GPRS working and see if he can get his sim card reset.
Cheers
Matt

Original AIM, ICQ, YAHOO install file from Tmobile

Does anyone know where I can get the Install File to get this back on my phone? The one from Tmobiles ROM
I guess its not possible!? its the only AIM version that I could get working on my service.
here is OZ...the original i think
thank you so much. i've been all over looking for this since i installed the kavana rom
actually i'm getting connection issues with both yahoo and AIM
on AIM i'm getting a text while signing on that says...
WV11RL2 ST = (200, "Successful") SI=1.1ax
and it goes on for more than i care to type.
it then times out.
make sure you install it to the phone not the storage card.
Thanks. I was looking for this.
I installed it to the phone's memory and it works great.
Does Oz count toward my SMS usage or internet?
MrSpam said:
Does Oz count toward my SMS usage or internet?
Click to expand...
Click to collapse
Oz Messenger uses SMS instead of internet...
sc2sick said:
actually i'm getting connection issues with both yahoo and AIM
on AIM i'm getting a text while signing on that says...
WV11RL2 ST = (200, "Successful") SI=1.1ax
and it goes on for more than i care to type.
it then times out.
Click to expand...
Click to collapse
Do0zman said:
make sure you install it to the phone not the storage card.
Click to expand...
Click to collapse
jdwrrzmm said:
Thanks. I was looking for this.
I installed it to the phone's memory and it works great.
Click to expand...
Click to collapse
I was having that same error so I installed the OZ Messenger to the phone but I am still getting the "Communications Error" after AIM tries to sign on.
I've tried to reboot many times but no dice.
after trying about 10 times, it finally connected but once I logged off and tried to connect again, I get the same connection error.
I tried rebooting many times no to avail.
fuLLah said:
after trying about 10 times, it finally connected but once I logged off and tried to connect again, I get the same connection error.
I tried rebooting many times no to avail.
Click to expand...
Click to collapse
PM me and I will send you the configurations when I get home, but make sure to PM me so I can remember to do that once I get home okay
Is your phone App unlocked??
try this version AFTER you uninstall and reboot your phone.
Reboot after you install it in main memory.
Here are the settings you should have in order to make OZ messenger work...
GPRS (go to settings, connections and GPRS, if you don't have these then create them exactly like this).
T-Mobile Data:
Connects To: WAP Network
Access point: wap.voicestream.com
T-Mobile Data 2:
Connects To: Work
Access point: wap.voicestream.com
T-Mobile MMS:
Connects To: WAP Network
Access point: wap.voicestream.com
T-Mobile WModem Link:
Connects To: WAP Network
Access point: wap.voicestream.com
T-Zones:
Connects To: WAP Network
Access point: wap.voicestream.com
Proxy: (go to settings, connections and Proxy, if you don't have these then create them exactly like this).
T-Zones Proxy:
Connects From: WAP Network
Connects To: The Internet
Proxy (name : port): 216.155.165.50:8080
Type: HTTP
T-Zones Proxy 2:
Connects From: Work
Connects To: The Internet
Proxy (name : port): 216.155.165.50:8080
Type: HTTP
* In connections (under settings), click menu, then advance and set ALL connections to AUTOMATIC
Many thanks
dungtq said:
Many thanks
Click to expand...
Click to collapse
Did it end up working for you?
Where can I get AIM?
I have the s621, and its running the leatest version of ricky, how can I download AIM on this phone? I have been lookin everywhere!
here you go
http://mobile.aol.com/aolproducts/aim-for-windows-mobile
yay first post!
Or look in my signature under smartphone programs and download oz messenger.
Mikey1022 said:
Is your phone App unlocked??
try this version AFTER you uninstall and reboot your phone.
Reboot after you install it in main memory.
Click to expand...
Click to collapse
I installed this Cab and it works so far, but I noticed that onces installed, it only displays AIM, ICQ, and Yahoo... but if you open the Cab on your computer, you see that there is an MSN file... how do I get to replace ICQ say with MSN? Thank you.

Network Problem

What I am doing:
1. connecting to WiFi AP
2. trying to access any internet site.
What is strange:
1. Internet Explorer, HTC weather and Stock works perfect
2. BUT Opera, Youtube and QuickGPS does not work
3. Intra-network works perfect either from Opera or IE.
Windows config:
1. I set DNS, WINS and proxy with port
2. in connections profiles I have one "My work network" for both Work and Internet.
3. WiFi session connects to Work profile.
4. NO VPN or Modems in profile ...
5. Adapter connects to Work profile.
6. I have certificates installed to access WiFi net.
What I did to resolve the issue:
- I did MTTY and nothing changed;
- I did change of MTU - did not help;
- I've renamed proxy in settings from Symbolic representation to IP - did not help;
- I've tried both 6.1 and 6.5 WM versions and ROMs
- I've tried many combinations of different settings, but nothing helped.
Some times I saw that the issue disappeared on some ROMs after a number of settings changed during tries... but I did not get a logic of how it become working...
I appreciate any help from you and ready to make a testing...
Where are you, masters?

flashed ROM/ No my medianet

I am new to tweaking my phone, it is a ATT Tilt 2 and I currently have the Energy Rom and Co0kies. My question is that I cannot connect to ATT My MEdia net thru Opera 10. Can anyone give me any pointers on how to configure it to have opera connect to My Media net.
Thanks
Colorado
Check this post, ignore steps 1-4
http://forum.xda-developers.com/showpost.php?p=5870098&postcount=416
Thanks for reply, but no help...
JColorado said:
Thanks for reply, but now help...
Click to expand...
Click to collapse
I think you could have been a tad more vague.
How is it possible that you were able to flash a rom and Hardspl the phone but you are unable to load a cab?
When you replaced the rom all the factory settings for your provider were erased. The cab he pointed to you reinstalls the ATT settings. You will still have to go to the connections box and select what you want your data connection to be.
Ask a proper question and on this site you are likely to get a great and informative response.
Oh, and welcome to XDA.
Well, Sorry if my question seemed vauge, Thanks for the cab file. I was able to install it no w/ no problems. My problem is not that I cannot connect with My MEdia net for internet connection, but I am trying to access the the ATT Stock My MEdia net personal Home page using Opera or any Browser.
Any help would be appreciated...
you have to enable the proxy to view medianet sites
go to this thread and download the proxy manager cab, once installed, just open up the enable proxy and you'll be good to go.
Thanks, Will install and check it out thanks...
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
JColorado said:
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
Click to expand...
Click to collapse
The ATT Proxy cabs are for internet explorer. For Opera you need to modify the opera config. To do this point the Opera browser to "opera:config"
Once there, go to the Proxy settings and enable these:
Enable HTTP 1.1 for proxy
HTTP server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP
Use HTTPS
Use Proxy On Local Names Check
Save the settings. This will get you access to http://device.home
Unfortunately, Celluar Video will not work as it checks the User Agent, and Opera 10 is not supported through the ATT Proxies. You can try setting a custom User Agent in "opera:config" and set it to something like:
"HTC-ST7377/2.07.401.1 (80303) WWE Opera/9.70 (Windows NT 5.1; U; en)"
I have no clue if this will work though.
-e
IDK
Thank you for your help, I am still having difficulties...
It basicly timed out trying to connect to the site, so I tried a basic site i.e. google and it still was timing out? I will try again, with the help of one of my co-workers who is more tech savy using the TP2 aswell but is w/ verizon

Categories

Resources